feat: add optional native mqtt and udp transport

docs/native-mqtt-integration.md

@@ -0,0 +1,161 @@
+# Native MQTT/UDP integration
+
+The server can accept device MQTT control messages and encrypted UDP audio
+without running `xiaozhi-mqtt-gateway`. Native MQTT is optional. The existing
+Gateway path and direct WebSocket path remain supported.
+
+## Compatibility modes
+
+| Mode | Device control | Device audio | Server business runtime |
+| --- | --- | --- | --- |
+| Direct WebSocket | WebSocket JSON | WebSocket binary | Shared runtime |
+| MQTT Gateway | MQTT via Gateway WebSocket | UDP via Gateway WebSocket | Shared runtime |
+| Native MQTT | MQTT 3.1.1 QoS 0 | AES-128-CTR UDP | Shared runtime |
+
+Native MQTT keeps the physical MQTT connection alive between conversations.
+Each device `hello` creates a new logical conversation and UDP encryption
+session. `goodbye` ends only that logical conversation; MQTT is closed only by
+MQTT disconnect, duplicate client takeover, keepAlive expiry, server shutdown,
+or a protocol/authentication error.
+
+## Enable Native MQTT
+
+Native MQTT is disabled by default. Both the protocol and server switches must
+be enabled:
+
+```yaml
+protocols:
+  enabled_protocols: [websocket, mqtt]
+  websocket_enabled: true
+  mqtt_enabled: true
+
+mqtt_server:
+  enabled: true
+  host: 0.0.0.0
+  port: 1883
+  udp_port: 1883
+  udp_bind_host: ""
+  public_endpoint: mqtt.example.com
+  signature_key: replace-with-a-strong-secret
+  max_connections: 1000
+  max_pending_connections: 128
+  heartbeat_interval: 30
+  max_payload_size: 8192
+  message_queue_size: 128
+  business_ready_timeout: 30
+  goodbye_timeout: 1
+  close_timeout: 2
+
+# Includes the common model and any Agent-specific local ASR variants.
+shared_asr_max_models: 3
+```
+
+`host` is the local MQTT listen address. `public_endpoint` must be reachable by
+the device and may be either `host` or `host:port`; manager-api normalizes it
+and does not append the port twice. When `host` is a wildcard and
+`public_endpoint` is a local IPv4 address, the UDP socket binds that address so
+reply datagrams use the same source IP advertised to the device. Set
+`udp_bind_host` only when the local UDP bind address must differ from the
+advertised endpoint (for example, behind NAT); leaving it empty enables the
+automatic behavior. Open the configured MQTT TCP and UDP ports in the firewall.
+
+When configuration is read from manager-api, configure the equivalent
+`protocols.*` and `mqtt_server.*` system parameters. The OTA response prefers a
+valid Native endpoint when Native is enabled. If Native is disabled or invalid,
+manager-api falls back to `server.mqtt_gateway`. If neither is configured, OTA
+returns only WebSocket information.
+
+The current firmware persists the OTA `mqtt` object. The UDP server, key and
+nonce used by Native mode are negotiated in the MQTT `hello` response, so
+manager-api does not send a separate top-level OTA `udp` object.
+
+Long-lived Native connections refresh Agent-private components at logical
+`hello` boundaries. Local ASR variants are shared by effective configuration
+instead of loaded once per device. `shared_asr_max_models` bounds resident
+models; when capacity is exhausted, the replacement runtime is rejected and
+the previous healthy runtime remains active.
+The default capacity reserves one transition slot so a single Agent can replace
+an active private local model without dropping its healthy runtime first. Idle
+variants are cached and evicted before another model is loaded; resident models
+never exceed this limit.
+
+MQTT application packets are dispatched in order outside the socket read loop,
+so PINGREQ remains responsive while a logical Hello waits for private runtime
+refresh. `business_ready_timeout` bounds that wait and closes an unusable
+connection instead of leaving the device in a half-negotiated session.
+`max_connections` limits authenticated client identities, while
+`max_pending_connections` separately bounds sockets that have not completed
+CONNECT. A connection using an existing client id may therefore replace its
+previous owner even when active capacity is full. The server sends the success
+CONNACK only after the previous owner has been reclaimed. `goodbye_timeout` and
+`close_timeout` bound best-effort device reset and physical resource cleanup so
+a stalled peer cannot block heartbeat or shutdown indefinitely.
+
+## Authentication and topics
+
+manager-api generates the device credentials and topics:
+
+- client id: `<group>@@@<mac_with_underscores>@@@<mac_with_underscores>`
+- publish topic: `device-server`
+- subscribe topic: `devices/p2p/<mac_with_underscores>`
+- username: Base64-encoded JSON metadata
+- password: Base64(HMAC-SHA256(`client_id + "|" + username`, signature key))
+
+Use the same secret for manager-api `mqtt_server.signature_key` and
+xiaozhi-server `mqtt_server.signature_key`. The legacy
+`server.mqtt_signature_key` remains a fallback for Gateway compatibility.
+
+Native MQTT accepts MQTT 3.1.1 CONNECT, SUBSCRIBE, PUBLISH QoS 0, PING and
+DISCONNECT. Unsupported protocol versions, QoS levels, malformed packets, or
+invalid credentials close the physical connection.
+
+## Session and UDP flow
+
+1. Device connects and subscribes over MQTT.
+2. Server validates CONNECT credentials and replaces any older connection with
+   the same client id.
+3. Device publishes protocol version 3 `hello`.
+4. Server waits until private configuration and business components are ready.
+5. Server creates a logical session and returns the UDP server, AES key, nonce,
+   output audio parameters and session id.
+6. The first valid UDP packet from the MQTT peer binds the UDP source tuple for
+   that logical session. Source changes are rejected until the next `hello`.
+7. MQTT JSON and decrypted Opus frames enter the same message processors used
+   by WebSocket and Gateway connections.
+8. Server `goodbye` returns the device to Idle and finalizes conversation tasks
+   while preserving the MQTT connection.
+
+The 16-byte UDP header is also the AES-CTR nonce:
+
+| Bytes | Field |
+| --- | --- |
+| 0 | packet type (`1`) |
+| 1 | reserved |
+| 2..3 | encrypted payload length, big endian |
+| 4..7 | connection id, big endian |
+| 8..11 | timestamp, big endian |
+| 12..15 | sequence, big endian |
+
+Datagrams with an invalid type, header, payload length, connection id, source
+address or stale sequence are discarded. Sequence gaps are tolerated because
+UDP can lose packets; late and duplicate packets are discarded. AES-CTR
+provides confidentiality but not integrity, so Native MQTT and UDP should be
+exposed only with a strong signature key and appropriate network controls.
+
+## Verification
+
+From `main/xiaozhi-server`:
+
+```bash
+python -m compileall -q .
+```
+
+From `main/manager-api` with JDK 21:
+
+```bash
+mvn clean package
+```
+
+Before deployment, verify Native and Gateway separately with real hardware:
+multiple conversations, TTS interruption, exit to Idle, duplicate reconnect,
+server restart, short network loss and a 30-60 minute keepAlive soak.

main/manager-api/src/main/java/xiaozhi/common/constant/Constant.java

@@ -106,6 +106,32 @@ public interface Constant {
      */
     String SERVER_MQTT_GATEWAY = "server.mqtt_gateway";
 
+    /**
+     * MQTT原生服务开关
+     */
+    String SERVER_MQTT_ENABLED = "server.mqtt_enabled";
+
+    /**
+     * 新版协议配置
+     */
+    String PROTOCOLS_ENABLED = "protocols.enabled_protocols";
+    String PROTOCOLS_WEBSOCKET_ENABLED = "protocols.websocket_enabled";
+    String PROTOCOLS_MQTT_ENABLED = "protocols.mqtt_enabled";
+
+    /**
+     * 新版原生MQTT配置
+     */
+    String MQTT_SERVER_ENABLED = "mqtt_server.enabled";
+    String MQTT_SERVER_HOST = "mqtt_server.host";
+    String MQTT_SERVER_PORT = "mqtt_server.port";
+    String MQTT_SERVER_UDP_PORT = "mqtt_server.udp_port";
+    String MQTT_SERVER_UDP_BIND_HOST = "mqtt_server.udp_bind_host";
+    String MQTT_SERVER_PUBLIC_ENDPOINT = "mqtt_server.public_endpoint";
+    String MQTT_SERVER_SIGNATURE_KEY = "mqtt_server.signature_key";
+    String MQTT_SERVER_MANAGER_API = "mqtt_server.manager_api";
+    String MQTT_SERVER_MANAGER_API_SECRET = "mqtt_server.manager_api_secret";
+    String SERVER_MQTT_MANAGER_API = "server.mqtt_manager_api";
+
     /**
      * ota地址
      */
@@ -350,4 +376,4 @@ public interface Constant {
             return value;
         }
     }
-}
+}

main/manager-api/src/main/java/xiaozhi/modules/device/controller/OTAController.java

@@ -1,6 +1,7 @@
 package xiaozhi.modules.device.controller;
 
 import java.nio.charset.StandardCharsets;
+import java.util.Arrays;
 
 import org.apache.commons.lang3.StringUtils;
 import org.springframework.http.MediaType;
@@ -78,8 +79,8 @@ public class OTAController {
     @Hidden
     public ResponseEntity<String> getOTA() {
         String mqttUdpConfig = sysParamsService.getValue(Constant.SERVER_MQTT_GATEWAY, false);
-        if (StringUtils.isBlank(mqttUdpConfig)) {
+        if (!isNativeMqttReady() && !isConfiguredValue(mqttUdpConfig)) {
-            return ResponseEntity.ok("OTA接口不正常，缺少mqtt_gateway地址，请登录智控台，在参数管理找到【server.mqtt_gateway】配置");
+            return ResponseEntity.ok("OTA接口不正常，缺少mqtt_gateway地址或未启用原生MQTT，请登录智控台，在参数管理找到【server.mqtt_gateway】或【mqtt_server.enabled/protocols.mqtt_enabled】配置");
         }
         String wsUrl = sysParamsService.getValue(Constant.SERVER_WEBSOCKET, true);
         if (StringUtils.isBlank(wsUrl) || wsUrl.equals("null")) {
@@ -92,6 +93,49 @@ public class OTAController {
         return ResponseEntity.ok("OTA接口运行正常，websocket集群数量：" + wsUrl.split(";").length);
     }
 
+    private boolean isNativeMqttEnabled() {
+        String enabled = sysParamsService.getValue(Constant.MQTT_SERVER_ENABLED, false);
+        boolean serverEnabled = isConfiguredValue(enabled)
+                ? isTrue(enabled)
+                : isTrue(sysParamsService.getValue(Constant.SERVER_MQTT_ENABLED, false));
+
+        boolean protocolEnabled = isTrue(
+                sysParamsService.getValue(Constant.PROTOCOLS_MQTT_ENABLED, false));
+        if (!protocolEnabled) {
+            String enabledProtocols = sysParamsService.getValue(Constant.PROTOCOLS_ENABLED, false);
+            if (StringUtils.isNotBlank(enabledProtocols)) {
+                String normalized = enabledProtocols
+                        .replace("[", "")
+                        .replace("]", "")
+                        .replace("\"", "");
+                protocolEnabled = Arrays.stream(normalized.split("[;,\\s]+"))
+                        .anyMatch("mqtt"::equalsIgnoreCase);
+            }
+        }
+        return serverEnabled && protocolEnabled;
+    }
+
+    private boolean isNativeMqttReady() {
+        if (!isNativeMqttEnabled()) {
+            return false;
+        }
+        String signatureKey = sysParamsService.getValue(
+                Constant.MQTT_SERVER_SIGNATURE_KEY, false);
+        if (!isConfiguredValue(signatureKey)) {
+            signatureKey = sysParamsService.getValue(
+                    Constant.SERVER_MQTT_SECRET, false);
+        }
+        return isConfiguredValue(signatureKey);
+    }
+
+    private boolean isTrue(String value) {
+        return "true".equalsIgnoreCase(value) || "1".equals(value);
+    }
+
+    private boolean isConfiguredValue(String value) {
+        return StringUtils.isNotBlank(value) && !"null".equalsIgnoreCase(value.trim());
+    }
+
     @SneakyThrows
     private ResponseEntity<String> createResponse(DeviceReportRespDTO deviceReportRespDTO) {
         ObjectMapper objectMapper = new ObjectMapper();

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/DeviceAddressBookServiceImpl.java

@@ -18,6 +18,7 @@ import xiaozhi.common.redis.RedisKeys;
 import xiaozhi.common.redis.RedisUtils;
 import xiaozhi.modules.device.dao.DeviceAddressBookDao;
 import xiaozhi.modules.device.entity.DeviceAddressBookEntity;
+import xiaozhi.modules.device.entity.DeviceEntity;
 import xiaozhi.modules.device.service.DeviceAddressBookService;
 import xiaozhi.modules.device.service.DeviceService;
 import xiaozhi.modules.sys.service.SysParamsService;
@@ -59,7 +60,14 @@ public class DeviceAddressBookServiceImpl implements DeviceAddressBookService {
         Map<String, Map<String, String>> allBooks = getAllAddressBooks();
 
         if (isAnswer) {
-            return postToMqtt("/api/call/accept", Map.of("mac", callerMac), "接听");
+            DeviceEntity callerDevice =
+                    deviceService.getDeviceByMacAddress(callerMac);
+            if (callerDevice == null) {
+                return errorResult("接听失败，设备信息不存在");
+            }
+            return postCallAccept(
+                    buildMqttClientId(callerDevice),
+                    Map.of("mac", callerMac));
         }
 
         // 主动呼叫模式
@@ -79,6 +87,14 @@ public class DeviceAddressBookServiceImpl implements DeviceAddressBookService {
             return errorResult("呼叫失败，您没有权限呼叫该设备");
         }
 
+        DeviceEntity callerDevice =
+                deviceService.getDeviceByMacAddress(callerMac);
+        DeviceEntity targetDevice =
+                deviceService.getDeviceByMacAddress(targetMac);
+        if (callerDevice == null || targetDevice == null) {
+            return errorResult("呼叫失败，设备信息不存在");
+        }
+
         // 获取目标设备如何称呼主叫方
         Map<String, String> targetBook = allBooks.get(targetMac.toLowerCase());
         String callerNickname = null;
@@ -86,15 +102,19 @@ public class DeviceAddressBookServiceImpl implements DeviceAddressBookService {
             callerNickname = targetBook.get(callerMac.toLowerCase());
         }
         if (StringUtils.isBlank(callerNickname)) {
-            callerNickname = deviceService.getDeviceByMacAddress(callerMac).getAlias();
+            callerNickname = callerDevice.getAlias();
             if (StringUtils.isBlank(callerNickname)) {
                 callerNickname = formatMacAsDeviceName(callerMac);
             }
         }
 
-        return postToMqtt("/api/call/request",
+        return postCallRequest(
-                Map.of("caller_mac", callerMac, "target_mac", targetMac, "caller_nickname", callerNickname),
+                buildMqttClientId(callerDevice),
-                "呼叫");
+                buildMqttClientId(targetDevice),
+                Map.of(
+                        "caller_mac", callerMac,
+                        "target_mac", targetMac,
+                        "caller_nickname", callerNickname));
     }
 
     @Override
@@ -195,32 +215,50 @@ public class DeviceAddressBookServiceImpl implements DeviceAddressBookService {
         return result;
     }
 
-    private Map<String, Object> postToMqtt(String path, Map<String, Object> body, String action) {
+    private Map<String, Object> postCallRequest(
+            String callerClientId,
+            String targetClientId,
+            Map<String, Object> body) {
+        try {
+            MqttManagementHttpClient.Response response =
+                    createMqttManagementRouter().sendCallRequest(
+                            callerClientId, targetClientId, body);
+            return parseCallResponse(response, "呼叫");
+        } catch (Exception e) {
+            return errorResult("呼叫失败，请稍后再试");
+        }
+    }
+
+    private Map<String, Object> postCallAccept(
+            String clientId,
+            Map<String, Object> body) {
+        try {
+            MqttManagementHttpClient.Response response =
+                    createMqttManagementRouter().sendCallAccept(
+                            clientId, body);
+            return parseCallResponse(response, "接听");
+        } catch (Exception e) {
+            return errorResult("接听失败，请稍后再试");
+        }
+    }
+
+    private Map<String, Object> parseCallResponse(
+            MqttManagementHttpClient.Response response,
+            String action) {
         Map<String, Object> result = new HashMap<>();
         result.put("status", "error");
-
+        if (response == null || StringUtils.isBlank(response.body())) {
-        String mqttGatewayUrl = sysParamsService.getValue("server.mqtt_manager_api", true);
+            result.put("message", action + "失败，MQTT管理配置缺失");
-        String mqttSignatureKey = sysParamsService.getValue(Constant.SERVER_MQTT_SECRET, true);
-
-        if (StringUtils.isBlank(mqttGatewayUrl) || "null".equals(mqttGatewayUrl)
-                || MqttGatewayAuthorization.isMissingSignatureKey(mqttSignatureKey)) {
-            result.put("message", action + "失败，网关配置缺失");
             return result;
         }
 
         try {
-            String url = "http://" + mqttGatewayUrl + path;
+            Map<String, Object> backendResult =
-            String response = MqttGatewayAuthorization.postJson(
+                    JSONUtil.parseObj(response.body());
-                    url,
+            result.put("status", backendResult.get("status"));
-                    JSONUtil.toJsonStr(body),
+            result.put("message", backendResult.get("message"));
-                    mqttSignatureKey,
+            if (backendResult.containsKey("code")) {
-                    Instant.now(),
+                result.put("code", backendResult.get("code"));
-                    5000);
-
-            if (StringUtils.isNotBlank(response)) {
-                Map<String, Object> gwResult = JSONUtil.parseObj(response);
-                result.put("status", gwResult.get("status"));
-                result.put("message", gwResult.get("message"));
             }
             return result;
         } catch (Exception e) {
@@ -229,6 +267,17 @@ public class DeviceAddressBookServiceImpl implements DeviceAddressBookService {
         }
     }
 
+    MqttManagementRouter createMqttManagementRouter() {
+        return new MqttManagementRouter(
+                new MqttManagementEndpointResolver(sysParamsService),
+                new MqttManagementHttpClient());
+    }
+
+    private String buildMqttClientId(DeviceEntity device) {
+        return MqttClientId.build(
+                device.getBoard(), device.getMacAddress());
+    }
+
     private String formatMacAsDeviceName(String mac) {
         if (StringUtils.isBlank(mac) || mac.length() < 2) {
             return mac;

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/DeviceServiceImpl.java

@@ -5,11 +5,13 @@ import java.security.InvalidKeyException;
 import java.security.NoSuchAlgorithmException;
 import java.time.Instant;
 import java.util.ArrayList;
+import java.util.Arrays;
 import java.util.Base64;
 import java.util.Collections;
 import java.util.Date;
 import java.util.HashMap;
 import java.util.List;
+import java.util.Locale;
 import java.util.Map;
 import java.util.Optional;
 import java.util.Set;
@@ -157,32 +159,20 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
      */
     @Override
     public String getDeviceOnlineData(String agentId) {
-        // 从系统参数中获取MQTT网关地址
-        String mqttGatewayUrl = sysParamsService.getValue("server.mqtt_manager_api", true);
-        if (StringUtils.isBlank(mqttGatewayUrl) || "null".equals(mqttGatewayUrl)) {
-            return "";
-        }
-        // 构建完整的URL
-        String url = StrUtil.format("http://{}/api/devices/status", mqttGatewayUrl);
-
         // 获取当前用户的设备列表
         UserDetail user = SecurityUser.getUser();
         List<DeviceEntity> devices = getUserDevices(user.getId(), agentId);
 
         // 构建deviceIds数组
-        Set<String> deviceIds = devices.stream().map(o -> {
+        Set<String> deviceIds = devices.stream()
-            String macAddress = Optional.ofNullable(o.getMacAddress()).orElse("unknown").replace(":", "_");
+                .map(device -> MqttClientId.build(
-            String groupId = Optional.ofNullable(o.getBoard()).orElse("GID_default").replace(":", "_");
+                        device.getBoard(), device.getMacAddress()))
-            return StrUtil.format("{}@@@{}@@@{}", groupId, macAddress, macAddress);
+                .collect(Collectors.toSet());
-        }).collect(Collectors.toSet());
 
         // 构建请求入参
-        Map<String, Set<String>> params = MapUtil
-                .builder(new HashMap<String, Set<String>>())
-                .put("clientIds", deviceIds).build();
-
         if (ToolUtil.isNotEmpty(deviceIds)) {
-            return postToMqttGateway(url, params);
+            return createMqttManagementRouter()
+                    .getMergedStatus(deviceIds);
         }
         // 返回响应
         return "";
@@ -194,6 +184,15 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         response.setServer_time(buildServerTime());
 
         DeviceEntity deviceById = getDeviceByMacAddress(macAddress);
+        String reportedBoard = deviceReport.getBoard() == null
+                ? null
+                : deviceReport.getBoard().getType();
+        if (deviceById != null
+                && StringUtils.isBlank(deviceById.getBoard())
+                && StringUtils.isNotBlank(reportedBoard)) {
+            deviceById.setBoard(reportedBoard);
+            baseDao.updateById(deviceById);
+        }
 
         // 设备未绑定，则返回当前上传的固件信息（不更新）以此兼容旧固件版本
         if (deviceById == null) {
@@ -204,8 +203,7 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         } else {
             // 只有在设备已绑定且明确开启自动升级时才返回固件升级信息
             if (Integer.valueOf(1).equals(deviceById.getAutoUpdate())) {
-                String type = deviceReport.getBoard() == null ? null : deviceReport.getBoard().getType();
+                DeviceReportRespDTO.Firmware firmware = buildFirmwareInfo(reportedBoard,
-                DeviceReportRespDTO.Firmware firmware = buildFirmwareInfo(type,
                         deviceReport.getApplication() == null ? null : deviceReport.getApplication().getVersion());
                 response.setFirmware(firmware);
             }
@@ -248,20 +246,43 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
 
         response.setWebsocket(websocket);
 
-        // 添加MQTT UDP配置
+        // UDP key/nonce/endpoint is negotiated by the MQTT hello response.
-        // 从系统参数获取MQTT Gateway地址，仅在配置有效时使用
+        // OTA only needs to provide the MQTT connection parameters.
-        String mqttUdpConfig = sysParamsService.getValue(Constant.SERVER_MQTT_GATEWAY, true);
+        String groupId = "GID_default";
-        if (mqttUdpConfig != null && !mqttUdpConfig.equals("null") && !mqttUdpConfig.isEmpty()) {
+        if (deviceById != null && StringUtils.isNotBlank(deviceById.getBoard())) {
+            groupId = deviceById.getBoard();
+        } else if (deviceReport.getBoard() != null && StringUtils.isNotBlank(deviceReport.getBoard().getType())) {
+            groupId = deviceReport.getBoard().getType();
+        }
+
+        boolean mqttConfigured = false;
+        if (isNativeMqttEnabled()) {
             try {
-                String groupId = deviceById != null && deviceById.getBoard() != null ? deviceById.getBoard()
+                DeviceReportRespDTO.MQTT mqtt = buildNativeMqttConfig(macAddress, groupId, clientId);
-                        : "GID_default";
+                String endpoint = buildNativeMqttEndpoint();
-                DeviceReportRespDTO.MQTT mqtt = buildMqttConfig(macAddress, groupId);
+                if (mqtt != null && StringUtils.isNotBlank(endpoint)) {
-                if (mqtt != null) {
+                    mqtt.setEndpoint(endpoint);
-                    mqtt.setEndpoint(mqttUdpConfig);
                     response.setMqtt(mqtt);
+                    mqttConfigured = true;
                 }
             } catch (Exception e) {
-                log.error("生成MQTT配置失败: {}", e.getMessage());
+                log.error("生成原生MQTT配置失败: {}", e.getMessage());
+            }
+        }
+
+        if (!mqttConfigured) {
+            // Native 未启用或配置无效时继续兼容 MQTT Gateway。
+            String mqttUdpConfig = sysParamsService.getValue(Constant.SERVER_MQTT_GATEWAY, true);
+            if (mqttUdpConfig != null && !mqttUdpConfig.equals("null") && !mqttUdpConfig.isEmpty()) {
+                try {
+                    DeviceReportRespDTO.MQTT mqtt = buildMqttConfig(macAddress, groupId);
+                    if (mqtt != null) {
+                        mqtt.setEndpoint(mqttUdpConfig);
+                        response.setMqtt(mqtt);
+                    }
+                } catch (Exception e) {
+                    log.error("生成MQTT配置失败: {}", e.getMessage());
+                }
             }
         }
 
@@ -633,6 +654,210 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         return String.format("%s.%d", signatureBase64, timestamp);
     }
 
+    private boolean isNativeMqttEnabled() {
+        String enabled = sysParamsService.getValue(Constant.MQTT_SERVER_ENABLED, true);
+        String legacyEnabled = sysParamsService.getValue(Constant.SERVER_MQTT_ENABLED, true);
+        boolean serverEnabled = isConfiguredValue(enabled)
+                ? isTrue(enabled)
+                : isTrue(legacyEnabled);
+
+        String protoEnabled = sysParamsService.getValue(Constant.PROTOCOLS_MQTT_ENABLED, true);
+        String enabledProtocols = sysParamsService.getValue(Constant.PROTOCOLS_ENABLED, true);
+        boolean protocolEnabled = isTrue(protoEnabled);
+        if (!protocolEnabled && StringUtils.isNotBlank(enabledProtocols)) {
+            String normalizedProtocols = enabledProtocols
+                    .replace("[", "")
+                    .replace("]", "")
+                    .replace("\"", "");
+            protocolEnabled = Arrays.stream(normalizedProtocols.split("[;,\\s]+"))
+                    .anyMatch("mqtt"::equalsIgnoreCase);
+        }
+        return serverEnabled && protocolEnabled;
+    }
+
+    private boolean isTrue(String value) {
+        return "true".equalsIgnoreCase(value) || "1".equals(value);
+    }
+
+    private boolean isConfiguredValue(String value) {
+        return StringUtils.isNotBlank(value)
+                && !"null".equalsIgnoreCase(value.trim())
+                && !value.contains("你");
+    }
+
+    private String buildNativeMqttEndpoint() {
+        String publicEndpoint = sysParamsService.getValue(Constant.MQTT_SERVER_PUBLIC_ENDPOINT, true);
+        String host = sysParamsService.getValue(Constant.MQTT_SERVER_HOST, true);
+        EndpointParts endpointParts = parseEndpoint(publicEndpoint);
+        EndpointParts hostParts = parseEndpoint(host);
+        if ((isConfiguredValue(publicEndpoint) && endpointParts == null)
+                || (isConfiguredValue(host) && hostParts == null)) {
+            return null;
+        }
+        EndpointParts selectedEndpoint = null;
+        if (endpointParts != null && isClientReachableMqttHost(endpointParts.host)) {
+            selectedEndpoint = endpointParts;
+        } else if (hostParts != null && isClientReachableMqttHost(hostParts.host)) {
+            selectedEndpoint = hostParts;
+        }
+        if (selectedEndpoint == null) {
+            return null;
+        }
+        String mqttHost = selectedEndpoint.host;
+        Integer port = selectedEndpoint.port;
+        if (port == null) {
+            port = parseInt(sysParamsService.getValue(Constant.MQTT_SERVER_PORT, true), 1883);
+        }
+        if (StringUtils.isBlank(mqttHost) || port == null) {
+            return null;
+        }
+        return formatEndpoint(mqttHost, port);
+    }
+
+    private boolean isClientReachableMqttHost(String host) {
+        if (StringUtils.isBlank(host)) {
+            return false;
+        }
+        String normalized = host.trim().toLowerCase(Locale.ROOT);
+        return !"null".equals(normalized)
+                && !"localhost".equals(normalized)
+                && !"localhost.localdomain".equals(normalized)
+                && !"0.0.0.0".equals(normalized)
+                && !normalized.startsWith("127.");
+    }
+
+    private Integer parseInt(String value, Integer defaultValue) {
+        if (StringUtils.isBlank(value) || "null".equalsIgnoreCase(value)) {
+            return defaultValue;
+        }
+        try {
+            int port = Integer.parseInt(value);
+            if (port < 1 || port > 65535) {
+                return null;
+            }
+            return port;
+        } catch (NumberFormatException e) {
+            return null;
+        }
+    }
+
+    private String formatEndpoint(String host, int port) {
+        String normalizedHost = host.trim();
+        if (normalizedHost.indexOf(':') >= 0) {
+            return null;
+        }
+        return normalizedHost + ":" + port;
+    }
+
+    private static class EndpointParts {
+        private final String host;
+        private final Integer port;
+
+        private EndpointParts(String host, Integer port) {
+            this.host = host;
+            this.port = port;
+        }
+    }
+
+    private EndpointParts parseEndpoint(String raw) {
+        if (StringUtils.isBlank(raw) || "null".equalsIgnoreCase(raw)) {
+            return new EndpointParts(null, null);
+        }
+        String trimmed = raw.trim();
+        trimmed = trimmed.replaceFirst("(?i)^(mqtt|tcp|ssl|ws|wss|http|https)://", "");
+        int slashIdx = trimmed.indexOf('/');
+        if (slashIdx >= 0) {
+            trimmed = trimmed.substring(0, slashIdx);
+        }
+        if (StringUtils.isBlank(trimmed) || trimmed.startsWith("[")
+                || trimmed.indexOf(':') != trimmed.lastIndexOf(':')) {
+            return null;
+        }
+
+        String host = trimmed;
+        Integer port = null;
+
+        int colon = trimmed.lastIndexOf(':');
+        if (colon >= 0) {
+            if (colon == 0 || colon == trimmed.length() - 1) {
+                return null;
+            }
+            port = parseInt(trimmed.substring(colon + 1), null);
+            if (port == null) {
+                return null;
+            }
+            host = trimmed.substring(0, colon);
+        }
+        if (!isValidEndpointHost(host)) {
+            return null;
+        }
+        return new EndpointParts(host, port);
+    }
+
+    private boolean isValidEndpointHost(String host) {
+        if (StringUtils.isBlank(host)
+                || host.length() > 253
+                || host.chars().anyMatch(Character::isWhitespace)
+                || host.indexOf('@') >= 0
+                || host.indexOf('?') >= 0
+                || host.indexOf('#') >= 0
+                || host.indexOf('\\') >= 0) {
+            return false;
+        }
+        return Arrays.stream(host.split("\\.", -1))
+                .allMatch(label -> !label.isEmpty()
+                        && label.length() <= 63
+                        && Character.isLetterOrDigit(label.charAt(0))
+                        && Character.isLetterOrDigit(label.charAt(label.length() - 1))
+                        && label.chars().allMatch(ch ->
+                                Character.isLetterOrDigit(ch)
+                                        || ch == '-'
+                                        || ch == '_'));
+    }
+
+    private String buildMqttUsername() throws Exception {
+        Map<String, String> userData = new HashMap<>();
+        try {
+            ServletRequestAttributes attributes = (ServletRequestAttributes) RequestContextHolder
+                    .getRequestAttributes();
+            if (attributes != null) {
+                HttpServletRequest request = attributes.getRequest();
+                String clientIp = request.getRemoteAddr();
+                userData.put("ip", clientIp);
+            }
+        } catch (Exception e) {
+            userData.put("ip", "unknown");
+        }
+        String userDataJson = new com.fasterxml.jackson.databind.ObjectMapper().writeValueAsString(userData);
+        return Base64.getEncoder().encodeToString(userDataJson.getBytes(StandardCharsets.UTF_8));
+    }
+
+    private DeviceReportRespDTO.MQTT buildNativeMqttConfig(String macAddress, String groupId, String clientId)
+            throws Exception {
+        String deviceIdSafeStr = MqttClientId.normalizeDeviceId(macAddress);
+        String mqttClientId = MqttClientId.build(groupId, macAddress);
+
+        String username = buildMqttUsername();
+        String password = "";
+        String signatureKey = sysParamsService.getValue(Constant.MQTT_SERVER_SIGNATURE_KEY, true);
+        if (!isConfiguredValue(signatureKey)) {
+            signatureKey = sysParamsService.getValue(Constant.SERVER_MQTT_SECRET, true);
+        }
+        if (!isConfiguredValue(signatureKey)) {
+            log.error("原生MQTT已启用但未配置签名密钥，跳过原生MQTT配置下发");
+            return null;
+        }
+        password = generatePasswordSignature(mqttClientId + "|" + username, signatureKey);
+
+        DeviceReportRespDTO.MQTT mqtt = new DeviceReportRespDTO.MQTT();
+        mqtt.setClient_id(mqttClientId);
+        mqtt.setUsername(username);
+        mqtt.setPassword(password);
+        mqtt.setPublish_topic("device-server");
+        mqtt.setSubscribe_topic("devices/p2p/" + deviceIdSafeStr);
+        return mqtt;
+    }
+
     /**
      * 构建MQTT配置信息
      * 
@@ -650,28 +875,10 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         }
 
         // 构建客户端ID格式：groupId@@@macAddress@@@uuid
-        String groupIdSafeStr = groupId.replace(":", "_");
+        String deviceIdSafeStr = MqttClientId.normalizeDeviceId(macAddress);
-        String deviceIdSafeStr = macAddress.replace(":", "_");
+        String mqttClientId = MqttClientId.build(groupId, macAddress);
-        String mqttClientId = String.format("%s@@@%s@@@%s", groupIdSafeStr, deviceIdSafeStr, deviceIdSafeStr);
 
-        // 构建用户数据（包含IP等信息）
+        String username = buildMqttUsername();
-        Map<String, String> userData = new HashMap<>();
-        // 尝试获取客户端IP
-        try {
-            ServletRequestAttributes attributes = (ServletRequestAttributes) RequestContextHolder
-                    .getRequestAttributes();
-            if (attributes != null) {
-                HttpServletRequest request = attributes.getRequest();
-                String clientIp = request.getRemoteAddr();
-                userData.put("ip", clientIp);
-            }
-        } catch (Exception e) {
-            userData.put("ip", "unknown");
-        }
-
-        // 将用户数据编码为Base64 JSON
-        String userDataJson = new com.fasterxml.jackson.databind.ObjectMapper().writeValueAsString(userData);
-        String username = Base64.getEncoder().encodeToString(userDataJson.getBytes(StandardCharsets.UTF_8));
 
         // 生成密码签名
         String password = generatePasswordSignature(mqttClientId + "|" + username, signatureKey);
@@ -687,23 +894,14 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         return mqtt;
     }
 
-    private String postToMqttGateway(String url, Object requestBody) {
+    MqttManagementRouter createMqttManagementRouter() {
-        String signatureKey = sysParamsService.getValue(Constant.SERVER_MQTT_SECRET, false);
+        return new MqttManagementRouter(
-        return MqttGatewayAuthorization.postJson(
+                new MqttManagementEndpointResolver(sysParamsService),
-                url,
+                new MqttManagementHttpClient());
-                JSONUtil.toJsonStr(requestBody),
-                signatureKey,
-                Instant.now());
     }
 
     @Override
     public Object getDeviceTools(String deviceId) {
-        // 从系统参数中获取MQTT网关地址
-        String mqttGatewayUrl = sysParamsService.getValue("server.mqtt_manager_api", true);
-        if (StringUtils.isBlank(mqttGatewayUrl) || "null".equals(mqttGatewayUrl)) {
-            return null;
-        }
-
         // 获取设备信息
         DeviceEntity device = baseDao.selectById(deviceId);
         if (device == null) {
@@ -717,19 +915,20 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         }
 
         // 构建clientId
-        String macAddress = Optional.ofNullable(device.getMacAddress()).orElse("unknown").replace(":", "_");
+        String clientId = MqttClientId.build(
-        String groupId = Optional.ofNullable(device.getBoard()).orElse("GID_default").replace(":", "_");
+                device.getBoard(), device.getMacAddress());
-        String clientId = StrUtil.format("{}@@@{}@@@{}", groupId, macAddress, macAddress);
-
-        // 构建完整的URL
-        String url = StrUtil.format("http://{}/api/commands/{}", mqttGatewayUrl, clientId);
 
         // 存储所有工具列表
         List<Object> allTools = new ArrayList<>();
         String cursor = null;
+        Set<String> seenCursors = new java.util.HashSet<>();
+        int pageCount = 0;
+        MqttManagementRouter managementRouter =
+                createMqttManagementRouter();
+        MqttManagementEndpointResolver.Backend selectedBackend = null;
 
         // 循环获取分页数据
-        while (true) {
+        while (pageCount++ < 32) {
             // 构建params
             Map<String, Object> paramsMap = MapUtil.builder(new HashMap<String, Object>())
                     .put("withUserTools", true)
@@ -754,26 +953,44 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
                     .put("payload", payload)
                     .build();
 
-            String resultMessage = postToMqttGateway(url, requestBody);
+            MqttManagementHttpClient.Response response =
+                    managementRouter.sendReadOnlyCommand(
+                            clientId, requestBody, selectedBackend);
+            if (response == null || !response.isSuccessfulHttp()) {
+                return null;
+            }
+            String resultMessage =
+                    response.body();
+            if (selectedBackend == null) {
+                selectedBackend = response.backend();
+            }
 
             // 解析响应
             if (StringUtils.isBlank(resultMessage)) {
-                break;
+                return null;
             }
 
-            JSONObject jsonObject = JSONUtil.parseObj(resultMessage);
+            JSONObject jsonObject;
+            try {
+                jsonObject = JSONUtil.parseObj(resultMessage);
+            } catch (RuntimeException e) {
+                return null;
+            }
             if (!jsonObject.getBool("success", false)) {
-                break;
+                return null;
             }
 
             JSONObject data = jsonObject.getJSONObject("data");
             if (data == null) {
-                break;
+                return null;
             }
 
             // 获取当前页的工具列表
             JSONArray tools = data.getJSONArray("tools");
-            if (tools != null && !tools.isEmpty()) {
+            if (tools == null) {
+                return null;
+            }
+            if (!tools.isEmpty()) {
                 allTools.addAll(tools);
             }
 
@@ -781,29 +998,23 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
             String nextCursor = data.getStr("nextCursor");
             if (StringUtils.isBlank(nextCursor)) {
                 // 没有下一页了
-                break;
+                Map<String, Object> resultData = new HashMap<>();
+                resultData.put("tools", allTools);
+                return resultData;
+            }
+            if (!seenCursors.add(nextCursor)) {
+                log.warn("MQTT设备工具列表返回重复cursor，终止分页: {}",
+                        nextCursor);
+                return null;
             }
             cursor = nextCursor;
         }
 
-        // 构建返回结果
+        return null;
-        if (allTools.isEmpty()) {
-            return null;
-        }
-
-        Map<String, Object> resultData = new HashMap<>();
-        resultData.put("tools", allTools);
-        return resultData;
     }
 
     @Override
     public Object callDeviceTool(String deviceId, String toolName, Map<String, Object> arguments) {
-        // 从系统参数中获取MQTT网关地址
-        String mqttGatewayUrl = sysParamsService.getValue("server.mqtt_manager_api", true);
-        if (StringUtils.isBlank(mqttGatewayUrl) || "null".equals(mqttGatewayUrl)) {
-            return null;
-        }
-
         // 获取设备信息
         DeviceEntity device = baseDao.selectById(deviceId);
         if (device == null) {
@@ -817,12 +1028,8 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
         }
 
         // 构建clientId
-        String macAddress = Optional.ofNullable(device.getMacAddress()).orElse("unknown").replace(":", "_");
+        String clientId = MqttClientId.build(
-        String groupId = Optional.ofNullable(device.getBoard()).orElse("GID_default").replace(":", "_");
+                device.getBoard(), device.getMacAddress());
-        String clientId = StrUtil.format("{}@@@{}@@@{}", groupId, macAddress, macAddress);
-
-        // 构建完整的URL
-        String url = StrUtil.format("http://{}/api/commands/{}", mqttGatewayUrl, clientId);
 
         // 构建请求体
         Map<String, Object> params = MapUtil
@@ -845,7 +1052,11 @@ public class DeviceServiceImpl extends BaseServiceImpl<DeviceDao, DeviceEntity>
                 .put("payload", payload)
                 .build();
 
-        String resultMessage = postToMqttGateway(url, requestBody);
+        MqttManagementHttpClient.Response response =
+                createMqttManagementRouter()
+                        .sendMutatingCommand(clientId, requestBody);
+        String resultMessage =
+                response == null ? null : response.body();
 
         // 解析响应
         if (StringUtils.isNotBlank(resultMessage)) {

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/MqttClientId.java

@@ -0,0 +1,28 @@
+package xiaozhi.modules.device.service.impl;
+
+import java.util.Locale;
+
+import org.apache.commons.lang3.StringUtils;
+
+final class MqttClientId {
+
+    private MqttClientId() {
+    }
+
+    static String build(String board, String macAddress) {
+        String groupId = StringUtils.defaultIfBlank(
+                board, "GID_default").trim().replace(":", "_");
+        String deviceId = StringUtils.defaultIfBlank(macAddress, "unknown")
+                .trim()
+                .replace(":", "_");
+        return groupId + "@@@" + deviceId + "@@@" + deviceId;
+    }
+
+    static String normalizeDeviceId(String macAddress) {
+        return StringUtils.defaultIfBlank(macAddress, "unknown")
+                .trim()
+                .toLowerCase(Locale.ROOT)
+                .replace(":", "_")
+                .replace("-", "_");
+    }
+}

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/MqttGatewayAuthorization.java

@@ -27,10 +27,8 @@ final class MqttGatewayAuthorization {
     }
 
     static String postJson(String url, String jsonBody, String signatureKey, Instant now, int timeoutMillis) {
-        GatewayResponse response = executeWithDateFallback(
+        GatewayResponse response = postJsonResponse(
-                signatureKey,
+                url, jsonBody, signatureKey, now, timeoutMillis);
-                now,
-                token -> executeRequest(url, jsonBody, token, timeoutMillis));
 
         if (response.statusCode() < 200 || response.statusCode() >= 300) {
             throw new GatewayRequestException(
@@ -40,6 +38,19 @@ final class MqttGatewayAuthorization {
         return response.body();
     }
 
+    static GatewayResponse postJsonResponse(
+            String url,
+            String jsonBody,
+            String signatureKey,
+            Instant now,
+            int timeoutMillis) {
+        return executeWithDateFallback(
+                signatureKey,
+                now,
+                token -> executeRequest(
+                        url, jsonBody, token, timeoutMillis));
+    }
+
     static List<String> generateDailyTokens(String signatureKey, Instant now) {
         if (isMissingSignatureKey(signatureKey)) {
             throw new GatewayRequestException("MQTT Gateway signature key is empty", null);

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/MqttManagementEndpointResolver.java

@@ -0,0 +1,183 @@
+package xiaozhi.modules.device.service.impl;
+
+import java.net.URI;
+import java.net.URISyntaxException;
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.List;
+import java.util.Locale;
+
+import org.apache.commons.lang3.StringUtils;
+
+import xiaozhi.common.constant.Constant;
+import xiaozhi.modules.sys.service.SysParamsService;
+
+class MqttManagementEndpointResolver {
+
+    enum Backend {
+        NATIVE,
+        GATEWAY
+    }
+
+    record Endpoint(Backend backend, String baseUrl, String signatureKey) {
+    }
+
+    private final SysParamsService sysParamsService;
+
+    MqttManagementEndpointResolver(SysParamsService sysParamsService) {
+        this.sysParamsService = sysParamsService;
+    }
+
+    List<Endpoint> resolve() {
+        List<Endpoint> endpoints = new ArrayList<>(2);
+        resolveNative().ifPresent(endpoints::add);
+        resolveGateway().ifPresent(endpoints::add);
+        return endpoints;
+    }
+
+    java.util.Optional<Endpoint> resolveNative() {
+        if (!isNativeMqttEnabled()) {
+            return java.util.Optional.empty();
+        }
+        String endpoint = normalizeHttpEndpoint(sysParamsService.getValue(
+                Constant.MQTT_SERVER_MANAGER_API, true));
+        String signatureKey = firstConfigured(
+                sysParamsService.getValue(
+                        Constant.MQTT_SERVER_MANAGER_API_SECRET, true),
+                sysParamsService.getValue(
+                        Constant.MQTT_SERVER_SIGNATURE_KEY, true),
+                sysParamsService.getValue(
+                        Constant.SERVER_MQTT_SECRET, true));
+        if (endpoint == null || signatureKey == null) {
+            throw new ManagementConfigurationException(
+                    "原生MQTT已启用但管理端点或密钥无效");
+        }
+        return java.util.Optional.of(
+                new Endpoint(Backend.NATIVE, endpoint, signatureKey));
+    }
+
+    java.util.Optional<Endpoint> resolveGateway() {
+        String rawGateway = sysParamsService.getValue(
+                Constant.SERVER_MQTT_GATEWAY, true);
+        String rawEndpoint = sysParamsService.getValue(
+                Constant.SERVER_MQTT_MANAGER_API, true);
+        if (configured(rawGateway) == null
+                && configured(rawEndpoint) == null) {
+            return java.util.Optional.empty();
+        }
+        String endpoint = normalizeHttpEndpoint(rawEndpoint);
+        String signatureKey = configured(
+                sysParamsService.getValue(
+                        Constant.SERVER_MQTT_SECRET, true));
+        if (endpoint == null || signatureKey == null) {
+            throw new ManagementConfigurationException(
+                    "MQTT Gateway管理端点或密钥无效");
+        }
+        return java.util.Optional.of(
+                new Endpoint(Backend.GATEWAY, endpoint, signatureKey));
+    }
+
+    boolean isNativeMqttEnabled() {
+        String enabled = sysParamsService.getValue(
+                Constant.MQTT_SERVER_ENABLED, true);
+        String legacyEnabled = sysParamsService.getValue(
+                Constant.SERVER_MQTT_ENABLED, true);
+        boolean serverEnabled = configured(enabled) != null
+                ? isTrue(enabled)
+                : isTrue(legacyEnabled);
+
+        String protocolEnabled = sysParamsService.getValue(
+                Constant.PROTOCOLS_MQTT_ENABLED, true);
+        String enabledProtocols = sysParamsService.getValue(
+                Constant.PROTOCOLS_ENABLED, true);
+        boolean enabledByProtocol = isTrue(protocolEnabled);
+        if (!enabledByProtocol && StringUtils.isNotBlank(enabledProtocols)) {
+            String normalized = enabledProtocols
+                    .replace("[", "")
+                    .replace("]", "")
+                    .replace("\"", "");
+            enabledByProtocol = Arrays.stream(
+                    normalized.split("[;,\\s]+"))
+                    .anyMatch("mqtt"::equalsIgnoreCase);
+        }
+        return serverEnabled && enabledByProtocol;
+    }
+
+    static String normalizeHttpEndpoint(String raw) {
+        String configured = configured(raw);
+        if (configured == null) {
+            return null;
+        }
+        boolean hasScheme = configured.matches(
+                "^[A-Za-z][A-Za-z0-9+.-]*://.*");
+        if (hasScheme
+                && !configured.matches("(?i)^https?://.*")) {
+            return null;
+        }
+        String candidate = hasScheme ? configured : "http://" + configured;
+        try {
+            URI uri = new URI(candidate);
+            String scheme = uri.getScheme();
+            if (scheme == null
+                    || (!"http".equalsIgnoreCase(scheme)
+                            && !"https".equalsIgnoreCase(scheme))
+                    || StringUtils.isBlank(uri.getHost())
+                    || uri.getUserInfo() != null
+                    || uri.getQuery() != null
+                    || uri.getFragment() != null
+                    || uri.getPort() == 0
+                    || uri.getPort() > 65535) {
+                return null;
+            }
+            String path = uri.getPath();
+            if (path == null || "/".equals(path)) {
+                path = "";
+            } else {
+                path = path.replaceAll("/+$", "");
+            }
+            return new URI(
+                    scheme.toLowerCase(Locale.ROOT),
+                    null,
+                    uri.getHost(),
+                    uri.getPort(),
+                    path,
+                    null,
+                    null).toString();
+        } catch (URISyntaxException | IllegalArgumentException e) {
+            return null;
+        }
+    }
+
+    private static String firstConfigured(String... values) {
+        for (String value : values) {
+            String normalized = configured(value);
+            if (normalized != null) {
+                return normalized;
+            }
+        }
+        return null;
+    }
+
+    private static String configured(String value) {
+        if (StringUtils.isBlank(value)) {
+            return null;
+        }
+        String normalized = value.trim();
+        if ("null".equalsIgnoreCase(normalized)
+                || normalized.contains("你")) {
+            return null;
+        }
+        return normalized;
+    }
+
+    private static boolean isTrue(String value) {
+        return "true".equalsIgnoreCase(value) || "1".equals(value);
+    }
+
+    static final class ManagementConfigurationException
+            extends RuntimeException {
+        ManagementConfigurationException(String message) {
+            super(message);
+        }
+    }
+}

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/MqttManagementHttpClient.java

@@ -0,0 +1,56 @@
+package xiaozhi.modules.device.service.impl;
+
+import java.time.Instant;
+
+import cn.hutool.json.JSONUtil;
+
+class MqttManagementHttpClient {
+
+    private final int timeoutMillis;
+
+    MqttManagementHttpClient() {
+        this(5000);
+    }
+
+    MqttManagementHttpClient(int timeoutMillis) {
+        this.timeoutMillis = timeoutMillis;
+    }
+
+    Response post(
+            MqttManagementEndpointResolver.Endpoint endpoint,
+            String path,
+            Object requestBody) {
+        String url = appendPath(endpoint.baseUrl(), path);
+        MqttGatewayAuthorization.GatewayResponse response =
+                MqttGatewayAuthorization.postJsonResponse(
+                        url,
+                        JSONUtil.toJsonStr(requestBody),
+                        endpoint.signatureKey(),
+                        Instant.now(),
+                        timeoutMillis);
+        return new Response(
+                endpoint.backend(),
+                response.statusCode(),
+                response.body());
+    }
+
+    static String appendPath(String baseUrl, String path) {
+        String normalizedBase = baseUrl.endsWith("/")
+                ? baseUrl.substring(0, baseUrl.length() - 1)
+                : baseUrl;
+        String normalizedPath = path.startsWith("/")
+                ? path
+                : "/" + path;
+        return normalizedBase + normalizedPath;
+    }
+
+    record Response(
+            MqttManagementEndpointResolver.Backend backend,
+            int statusCode,
+            String body) {
+
+        boolean isSuccessfulHttp() {
+            return statusCode >= 200 && statusCode < 300;
+        }
+    }
+}

main/manager-api/src/main/java/xiaozhi/modules/device/service/impl/MqttManagementRouter.java

@@ -0,0 +1,431 @@
+package xiaozhi.modules.device.service.impl;
+
+import java.net.URLEncoder;
+import java.nio.charset.StandardCharsets;
+import java.util.ArrayList;
+import java.util.LinkedHashMap;
+import java.util.List;
+import java.util.Map;
+import java.util.Set;
+
+import cn.hutool.json.JSONObject;
+import cn.hutool.json.JSONUtil;
+
+final class MqttManagementRouter {
+
+    private final MqttManagementEndpointResolver endpointResolver;
+    private final MqttManagementHttpClient httpClient;
+
+    MqttManagementRouter(
+            MqttManagementEndpointResolver endpointResolver,
+            MqttManagementHttpClient httpClient) {
+        this.endpointResolver = endpointResolver;
+        this.httpClient = httpClient;
+    }
+
+    String getMergedStatus(Set<String> clientIds) {
+        List<MqttManagementEndpointResolver.Endpoint> endpoints =
+                endpointResolver.resolve();
+        if (endpoints.isEmpty()) {
+            return "";
+        }
+
+        Map<String, MutableDeviceStatus> merged =
+                initializeStatuses(clientIds);
+        int successfulBackends = 0;
+        RuntimeException lastFailure = null;
+        for (MqttManagementEndpointResolver.Endpoint endpoint : endpoints) {
+            try {
+                MqttManagementHttpClient.Response response =
+                        httpClient.post(
+                                endpoint,
+                                "/api/devices/status",
+                                Map.of("clientIds", clientIds));
+                if (!response.isSuccessfulHttp()) {
+                    throw new IllegalStateException(
+                            "MQTT管理状态查询失败: "
+                                    + response.statusCode());
+                }
+                mergeStatusResponse(
+                        merged, endpoint.backend(), response.body());
+                successfulBackends++;
+            } catch (RuntimeException e) {
+                lastFailure = e;
+            }
+        }
+
+        if (lastFailure != null
+                || successfulBackends != endpoints.size()) {
+            throw new ManagementUnavailableException(
+                    "无法确认全部MQTT后端状态", lastFailure);
+        }
+
+        Map<String, Object> result = new LinkedHashMap<>();
+        merged.forEach((clientId, status) ->
+                result.put(clientId, status.toMap()));
+        return JSONUtil.toJsonStr(result);
+    }
+
+    MqttManagementHttpClient.Response sendReadOnlyCommand(
+            String clientId, Object requestBody) {
+        return sendReadOnlyCommand(clientId, requestBody, null);
+    }
+
+    MqttManagementHttpClient.Response sendReadOnlyCommand(
+            String clientId,
+            Object requestBody,
+            MqttManagementEndpointResolver.Backend preferredBackend) {
+        List<MqttManagementEndpointResolver.Endpoint> endpoints =
+                endpointResolver.resolve();
+        if (endpoints.isEmpty()) {
+            return null;
+        }
+        if (preferredBackend != null) {
+            MqttManagementEndpointResolver.Endpoint endpoint =
+                    endpoints.stream()
+                            .filter(candidate ->
+                                    candidate.backend()
+                                            == preferredBackend)
+                            .findFirst()
+                            .orElseThrow(() ->
+                                    new ManagementUnavailableException(
+                                            "分页MQTT后端配置已变化",
+                                            null));
+            return sendCommand(endpoint, clientId, requestBody);
+        }
+
+        MqttManagementHttpClient.Response lastResponse = null;
+        RuntimeException lastFailure = null;
+        for (MqttManagementEndpointResolver.Endpoint endpoint : endpoints) {
+            try {
+                MqttManagementHttpClient.Response response =
+                        sendCommand(endpoint, clientId, requestBody);
+                lastResponse = response;
+                if (isCommandSuccess(response)) {
+                    return response;
+                }
+            } catch (RuntimeException e) {
+                lastFailure = e;
+            }
+        }
+        if (lastResponse != null) {
+            return lastResponse;
+        }
+        throw new ManagementUnavailableException(
+                "MQTT管理服务均不可用", lastFailure);
+    }
+
+    MqttManagementHttpClient.Response sendMutatingCommand(
+            String clientId, Object requestBody) {
+        List<MqttManagementEndpointResolver.Endpoint> endpoints =
+                endpointResolver.resolve();
+        if (endpoints.isEmpty()) {
+            return null;
+        }
+
+        List<MqttManagementEndpointResolver.Endpoint> online =
+                new ArrayList<>();
+        int successfulStatusBackends = 0;
+        RuntimeException lastStatusFailure = null;
+        for (MqttManagementEndpointResolver.Endpoint endpoint : endpoints) {
+            try {
+                MqttManagementHttpClient.Response statusResponse =
+                        httpClient.post(
+                                endpoint,
+                                "/api/devices/status",
+                                Map.of("clientIds", Set.of(clientId)));
+                if (!statusResponse.isSuccessfulHttp()) {
+                    throw new IllegalStateException(
+                            "MQTT管理状态查询失败: "
+                                    + statusResponse.statusCode());
+                }
+                Map<String, BackendDeviceStatus> statuses =
+                        parseStatusResponse(
+                                statusResponse.body(),
+                                Set.of(clientId));
+                successfulStatusBackends++;
+                if (statuses.get(clientId).exists()) {
+                    online.add(endpoint);
+                }
+            } catch (RuntimeException e) {
+                lastStatusFailure = e;
+            }
+        }
+
+        if (lastStatusFailure != null
+                || successfulStatusBackends != endpoints.size()) {
+            throw new ManagementUnavailableException(
+                    "无法确认设备所在的MQTT后端",
+                    lastStatusFailure);
+        }
+        if (online.isEmpty()) {
+            return offlineResponse(endpoints.get(0).backend());
+        }
+        if (online.size() > 1) {
+            return commandErrorResponse(
+                    endpoints.get(0).backend(),
+                    409,
+                    "设备同时存在于多个MQTT后端",
+                    "DEVICE_BACKEND_AMBIGUOUS");
+        }
+
+        return sendCommand(online.get(0), clientId, requestBody);
+    }
+
+    MqttManagementHttpClient.Response sendCallRequest(
+            String callerClientId,
+            String targetClientId,
+            Object requestBody) {
+        Set<String> clientIds = new java.util.LinkedHashSet<>();
+        clientIds.add(callerClientId);
+        clientIds.add(targetClientId);
+        return sendCallMutation(
+                clientIds,
+                "/api/call/request",
+                requestBody);
+    }
+
+    MqttManagementHttpClient.Response sendCallAccept(
+            String clientId, Object requestBody) {
+        return sendCallMutation(
+                Set.of(clientId),
+                "/api/call/accept",
+                requestBody);
+    }
+
+    private MqttManagementHttpClient.Response sendCallMutation(
+            Set<String> clientIds,
+            String path,
+            Object requestBody) {
+        List<MqttManagementEndpointResolver.Endpoint> endpoints =
+                endpointResolver.resolve();
+        if (endpoints.isEmpty()) {
+            return null;
+        }
+
+        Map<String, List<MqttManagementEndpointResolver.Endpoint>> owners =
+                new LinkedHashMap<>();
+        clientIds.forEach(clientId ->
+                owners.put(clientId, new ArrayList<>()));
+
+        RuntimeException statusFailure = null;
+        int successfulStatusBackends = 0;
+        for (MqttManagementEndpointResolver.Endpoint endpoint : endpoints) {
+            try {
+                MqttManagementHttpClient.Response response =
+                        httpClient.post(
+                                endpoint,
+                                "/api/devices/status",
+                                Map.of("clientIds", clientIds));
+                if (!response.isSuccessfulHttp()) {
+                    throw new IllegalStateException(
+                            "MQTT管理状态查询失败: "
+                                    + response.statusCode());
+                }
+                Map<String, BackendDeviceStatus> statuses =
+                        parseStatusResponse(response.body(), clientIds);
+                owners.forEach((clientId, matches) -> {
+                    if (statuses.get(clientId).exists()) {
+                        matches.add(endpoint);
+                    }
+                });
+                successfulStatusBackends++;
+            } catch (RuntimeException e) {
+                statusFailure = e;
+            }
+        }
+
+        if (statusFailure != null
+                || successfulStatusBackends != endpoints.size()) {
+            throw new ManagementUnavailableException(
+                    "无法确认通话设备所在的MQTT后端",
+                    statusFailure);
+        }
+
+        for (Map.Entry<String, List<MqttManagementEndpointResolver.Endpoint>>
+                owner : owners.entrySet()) {
+            if (owner.getValue().isEmpty()) {
+                return callErrorResponse(
+                        endpoints.get(0).backend(),
+                        404,
+                        "offline",
+                        "设备不在线",
+                        "DEVICE_OFFLINE");
+            }
+            if (owner.getValue().size() > 1) {
+                return callErrorResponse(
+                        endpoints.get(0).backend(),
+                        409,
+                        "error",
+                        "设备同时存在于多个MQTT后端",
+                        "DEVICE_BACKEND_AMBIGUOUS");
+            }
+        }
+
+        MqttManagementEndpointResolver.Endpoint selected =
+                owners.values().iterator().next().get(0);
+        boolean sameBackend = owners.values().stream()
+                .allMatch(matches -> matches.get(0).equals(selected));
+        if (!sameBackend) {
+            return callErrorResponse(
+                    selected.backend(),
+                    409,
+                    "error",
+                    "跨MQTT后端通话暂不支持",
+                    "CROSS_BACKEND_CALL_UNSUPPORTED");
+        }
+        return httpClient.post(selected, path, requestBody);
+    }
+
+    private MqttManagementHttpClient.Response sendCommand(
+            MqttManagementEndpointResolver.Endpoint endpoint,
+            String clientId,
+            Object requestBody) {
+        String encodedClientId = URLEncoder.encode(
+                clientId, StandardCharsets.UTF_8)
+                .replace("+", "%20");
+        return httpClient.post(
+                endpoint,
+                "/api/commands/" + encodedClientId,
+                requestBody);
+    }
+
+    private static Map<String, MutableDeviceStatus> initializeStatuses(
+            Set<String> clientIds) {
+        Map<String, MutableDeviceStatus> result = new LinkedHashMap<>();
+        clientIds.forEach(clientId ->
+                result.put(clientId, new MutableDeviceStatus()));
+        return result;
+    }
+
+    private static void mergeStatusResponse(
+            Map<String, MutableDeviceStatus> merged,
+            MqttManagementEndpointResolver.Backend backend,
+            String body) {
+        Map<String, BackendDeviceStatus> response =
+                parseStatusResponse(body, merged.keySet());
+        merged.forEach((clientId, status) -> {
+            BackendDeviceStatus value = response.get(clientId);
+            status.exists |= value.exists();
+            status.alive |= value.alive();
+            if (value.exists()) {
+                status.backends.add(
+                        backend.name().toLowerCase());
+            }
+        });
+    }
+
+    private static Map<String, BackendDeviceStatus> parseStatusResponse(
+            String body, Set<String> clientIds) {
+        JSONObject response;
+        try {
+            response = JSONUtil.parseObj(body);
+        } catch (RuntimeException e) {
+            throw new IllegalStateException(
+                    "MQTT管理状态响应不是JSON对象", e);
+        }
+        Map<String, BackendDeviceStatus> statuses =
+                new LinkedHashMap<>();
+        for (String clientId : clientIds) {
+            Object rawStatus = response.get(clientId);
+            if (!(rawStatus instanceof JSONObject status)
+                    || !status.containsKey("exists")
+                    || !status.containsKey("isAlive")) {
+                throw new IllegalStateException(
+                        "MQTT管理状态响应缺少设备状态: " + clientId);
+            }
+            Object rawExists = status.get("exists");
+            Object rawAlive = status.get("isAlive");
+            if (!(rawExists instanceof Boolean exists)
+                    || !(rawAlive instanceof Boolean alive)
+                    || (!exists && alive)) {
+                throw new IllegalStateException(
+                        "MQTT管理状态响应字段无效: " + clientId);
+            }
+            statuses.put(
+                    clientId,
+                    new BackendDeviceStatus(exists, alive));
+        }
+        return statuses;
+    }
+
+    private static boolean isCommandSuccess(
+            MqttManagementHttpClient.Response response) {
+        if (response == null || !response.isSuccessfulHttp()) {
+            return false;
+        }
+        try {
+            return JSONUtil.parseObj(response.body())
+                    .getBool("success", false);
+        } catch (Exception e) {
+            return false;
+        }
+    }
+
+    private static MqttManagementHttpClient.Response offlineResponse(
+            MqttManagementEndpointResolver.Backend backend) {
+        return new MqttManagementHttpClient.Response(
+                backend,
+                404,
+                JSONUtil.toJsonStr(Map.of(
+                        "success", false,
+                        "error", "设备未连接",
+                        "code", "DEVICE_OFFLINE",
+                        "dispatchAttempted", false)));
+    }
+
+    private static MqttManagementHttpClient.Response callErrorResponse(
+            MqttManagementEndpointResolver.Backend backend,
+            int statusCode,
+            String status,
+            String message,
+            String code) {
+        return new MqttManagementHttpClient.Response(
+                backend,
+                statusCode,
+                JSONUtil.toJsonStr(Map.of(
+                        "status", status,
+                        "message", message,
+                        "code", code)));
+    }
+
+    private static MqttManagementHttpClient.Response commandErrorResponse(
+            MqttManagementEndpointResolver.Backend backend,
+            int statusCode,
+            String error,
+            String code) {
+        return new MqttManagementHttpClient.Response(
+                backend,
+                statusCode,
+                JSONUtil.toJsonStr(Map.of(
+                        "success", false,
+                        "error", error,
+                        "code", code,
+                        "dispatchAttempted", false)));
+    }
+
+    static final class ManagementUnavailableException
+            extends RuntimeException {
+        ManagementUnavailableException(
+                String message, Throwable cause) {
+            super(message, cause);
+        }
+    }
+
+    private static final class MutableDeviceStatus {
+        private boolean exists;
+        private boolean alive;
+        private final List<String> backends = new ArrayList<>();
+
+        Map<String, Object> toMap() {
+            Map<String, Object> result = new LinkedHashMap<>();
+            result.put("isAlive", alive);
+            result.put("exists", exists);
+            result.put("backends", backends);
+            return result;
+        }
+    }
+
+    private record BackendDeviceStatus(boolean exists, boolean alive) {
+    }
+}

main/manager-api/src/main/java/xiaozhi/modules/sys/controller/SysParamsController.java

@@ -85,6 +85,7 @@ public class SysParamsController {
     public Result<Void> save(@RequestBody SysParamsDTO dto) {
         // 效验数据
         ValidatorUtils.validateEntity(dto, AddGroup.class, DefaultGroup.class);
+        validateMqttSecretLength(dto.getParamCode(), dto.getParamValue());
 
         sysParamsService.save(dto);
         configService.getConfig(false);
@@ -277,7 +278,10 @@ public class SysParamsController {
 
     // 校验mqtt密钥长度和复杂度
     private void validateMqttSecretLength(String paramCode, String secret) {
-        if (!paramCode.equals(Constant.SERVER_MQTT_SECRET)) {
+        if (!paramCode.equals(Constant.SERVER_MQTT_SECRET)
+                && !paramCode.equals(Constant.MQTT_SERVER_SIGNATURE_KEY)
+                && !paramCode.equals(
+                        Constant.MQTT_SERVER_MANAGER_API_SECRET)) {
             return;
         }
         if (StringUtils.isBlank(secret) || secret.equals("null")) {

main/manager-api/src/main/java/xiaozhi/modules/sys/service/impl/SysParamsServiceImpl.java

@@ -205,9 +205,14 @@ public class SysParamsServiceImpl extends BaseServiceImpl<SysParamsDao, SysParam
     public void initServerSecret() {
         // 获取服务器密钥
         String secretParam = getValue(Constant.SERVER_SECRET, false);
-        if (StringUtils.isBlank(secretParam) || "null".equals(secretParam)) {
+        if (StringUtils.isBlank(secretParam)
+                || "null".equalsIgnoreCase(secretParam.trim())) {
             String newSecret = UUID.randomUUID().toString();
             updateValueByCode(Constant.SERVER_SECRET, newSecret);
+        } else {
+            // Startup must repair a stale Redis value because authentication
+            // reads this parameter from cache while initialization reads DB.
+            sysParamsRedis.set(Constant.SERVER_SECRET, secretParam);
         }
 
         // 初始化SM2密钥对

main/manager-api/src/main/resources/db/changelog/202607190300.sql

@@ -0,0 +1,15 @@
+insert ignore into `sys_params`
+  (id, param_code, param_value, value_type, param_type, remark)
+values
+  (775, 'protocols.enabled_protocols', '["websocket"]', 'string', 1, '启用的协议列表'),
+  (776, 'protocols.websocket_enabled', 'true', 'boolean', 1, 'WebSocket协议开关'),
+  (777, 'protocols.mqtt_enabled', 'false', 'boolean', 1, 'MQTT协议开关'),
+  (778, 'mqtt_server.enabled', 'false', 'boolean', 1, '是否启用MQTT服务器'),
+  (779, 'mqtt_server.host', '0.0.0.0', 'string', 1, 'MQTT服务器监听地址'),
+  (780, 'mqtt_server.port', '1883', 'number', 1, 'MQTT服务器端口'),
+  (781, 'mqtt_server.udp_port', '1883', 'number', 1, 'UDP音频端口'),
+  (782, 'mqtt_server.public_endpoint', '127.0.0.1', 'string', 1, 'MQTT公网/局域网访问地址'),
+  (783, 'mqtt_server.max_connections', '1000', 'number', 1, '最大连接数'),
+  (784, 'mqtt_server.heartbeat_interval', '30', 'number', 1, '心跳间隔(秒)'),
+  (785, 'mqtt_server.max_payload_size', '8192', 'number', 1, '最大消息大小'),
+  (786, 'mqtt_server.signature_key', 'null', 'string', 1, 'MQTT签名密钥');

main/manager-api/src/main/resources/db/changelog/202607260900.sql

@@ -0,0 +1,9 @@
+insert ignore into `sys_params`
+  (id, param_code, param_value, value_type, param_type, remark)
+values
+  (787, 'mqtt_server.udp_bind_host', '', 'string', 1, 'UDP音频监听地址（留空时自动选择）'),
+  (788, 'mqtt_server.message_queue_size', '128', 'number', 1, 'MQTT应用消息队列上限'),
+  (789, 'mqtt_server.business_ready_timeout', '30', 'number', 1, 'Hello等待业务运行时就绪超时(秒)'),
+  (790, 'mqtt_server.max_pending_connections', '128', 'number', 1, 'MQTT待认证连接上限'),
+  (791, 'mqtt_server.goodbye_timeout', '1', 'number', 1, 'MQTT goodbye发送超时(秒)'),
+  (792, 'mqtt_server.close_timeout', '2', 'number', 1, 'MQTT连接清理超时(秒)');

main/manager-api/src/main/resources/db/changelog/202607262100.sql

@@ -0,0 +1,11 @@
+insert ignore into `sys_params`
+  (id, param_code, param_value, value_type, param_type, remark)
+values
+  (793, 'mqtt_server.manager_api', 'null', 'string', 1, '原生MQTT管理API地址'),
+  (794, 'mqtt_server.manager_api_secret', 'null', 'string', 1, '原生MQTT管理API签名密钥');
+
+update `sys_params`
+set param_value = '',
+    remark = 'MQTT公网/局域网访问地址（需配置为设备可达地址）'
+where param_code = 'mqtt_server.public_endpoint'
+  and param_value = '127.0.0.1';

main/manager-api/src/main/resources/db/changelog/db.changelog-master.yaml

@@ -711,3 +711,26 @@ databaseChangeLog:
         - sqlFile:
             encoding: utf8
             path: classpath:db/changelog/202607101200.sql
+  - changeSet:
+      id: 202607190300
+      author: CAIXYPROMISE
+      validCheckSum:
+        - "8:5df1e1f3654e6271889d5579a3908f77"
+      changes:
+        - sqlFile:
+            encoding: utf8
+            path: classpath:db/changelog/202607190300.sql
+  - changeSet:
+      id: 202607260900
+      author: CAIXYPROMISE
+      changes:
+        - sqlFile:
+            encoding: utf8
+            path: classpath:db/changelog/202607260900.sql
+  - changeSet:
+      id: 202607262100
+      author: CAIXYPROMISE
+      changes:
+        - sqlFile:
+            encoding: utf8
+            path: classpath:db/changelog/202607262100.sql

main/xiaozhi-server/app.py

@@ -69,7 +69,7 @@ async def main():
     gc_manager = get_gc_manager(interval_seconds=300)
     await gc_manager.start()
 
-    # 启动小智服务器门面
+    # 启动小智服务器门面（支持WebSocket和MQTT）
     xiaozhi_server = XiaozhiServerFacade(config)
     ota_server = None
     ota_task = None
@@ -77,7 +77,9 @@ async def main():
         # Facade.start() returns after every listener is ready. Await it so bind
         # or configuration failures stop startup instead of leaving a partial process.
         await xiaozhi_server.start()
-        ota_server = SimpleHttpServer(config)
+        ota_server = SimpleHttpServer(
+            config, management_owner=xiaozhi_server
+        )
         ota_task = asyncio.create_task(
             ota_server.start(), name="xiaozhi-http-server"
         )
@@ -149,6 +151,22 @@ async def main():
             websocket_port,
         )
 
+    # MQTT信息
+    mqtt_info = connection_info.get("mqtt", {})
+    if mqtt_info.get("enabled", False):
+        mqtt_port = mqtt_info.get("port", 1883)
+        udp_port = mqtt_info.get("udp_port", 1883)
+        logger.bind(tag=TAG).info(
+            "MQTT地址是\t\tmqtt://{}:{}",
+            get_local_ip(),
+            mqtt_port,
+        )
+        logger.bind(tag=TAG).info(
+            "UDP音频端口是\t{}:{}",
+            get_local_ip(),
+            udp_port,
+        )
+
     # 显示启用的协议
     enabled_protocols = xiaozhi_server.config.get("enabled_protocols", [])
     logger.bind(tag=TAG).info(f"启用的协议: {', '.join(enabled_protocols)}")
@@ -161,6 +179,10 @@ async def main():
             "如想测试WebSocket请启动digital-human模块，打开浏览器交互测试"
         )
 
+    if "mqtt" in enabled_protocols:
+        logger.bind(tag=TAG).info(
+            "=======MQTT客户端ID格式: GID_test@@@mac_address@@@uuid======="
+        )
     logger.bind(tag=TAG).info(
         "=============================================================\n"
     )

main/xiaozhi-server/config.yaml

@@ -35,12 +35,75 @@ server:
     # 如果属于白名单内的设备，不校验token，直接放行
     allowed_devices:
       - "11:22:33:44:55:66"
- # MQTT网关配置，用于通过OTA下发到设备，根据mqtt_gateway的.env文件配置，格式为host:port
+  # MQTT网关配置，用于通过OTA下发到设备，根据mqtt_gateway的.env文件配置，格式为host:port
   mqtt_gateway: null
   # MQTT签名密钥，用于生成MQTT连接密码，根据mqtt_gateway的.env文件配置
   mqtt_signature_key: null
   # UDP网关配置
   udp_gateway: null
+
+# #####################################################################################
+# #############################协议配置（Protocol Configuration）########################
+# 支持WebSocket和MQTT两种协议，可以单独启用或同时启用
+protocols:
+  # 启用的协议列表，可选值: ["websocket", "mqtt"]
+  enabled_protocols: ["websocket"]  # 默认只启用WebSocket
+  # WebSocket协议开关
+  websocket_enabled: true
+  # MQTT协议开关
+  mqtt_enabled: false
+
+# 同时驻留的本地共享ASR模型上限（包含公共模型）。Agent差异化ASR会按配置复用。
+shared_asr_max_models: 3
+
+# MQTT服务器配置（仅在mqtt_enabled为true时生效）
+mqtt_server:
+  # 是否启用MQTT服务器
+  enabled: false
+  # MQTT服务器监听地址
+  host: 0.0.0.0
+  # MQTT服务器端口
+  port: 1883
+  # UDP音频传输端口（通常与MQTT端口相同）
+  udp_port: 1883
+  # UDP监听地址。留空时若public_endpoint是本机IPv4，会优先绑定该地址，
+  # 确保设备收到的UDP回包源地址与hello中声明的地址一致。
+  udp_bind_host: ""
+  # 公网/局域网可达地址（设备连接时使用）
+  public_endpoint: ""
+  # MQTT签名密钥（用于生成连接密码）
+  signature_key: ""
+  # 最大连接数
+  max_connections: 1000
+  # 尚未完成CONNECT认证的连接上限；重复clientId替换不占用新的活跃名额
+  max_pending_connections: 128
+  # 心跳检查间隔（秒）
+  heartbeat_interval: 30
+  # 最大消息载荷大小（字节）
+  max_payload_size: 8192
+  # MQTT应用控制消息队列上限
+  message_queue_size: 128
+  # Hello等待业务运行时就绪的最长时间（秒）
+  business_ready_timeout: 30
+  # 发送goodbye和释放物理连接的最长等待时间（秒）
+  goodbye_timeout: 1
+  close_timeout: 2
+
+# MQTT协议使用说明：
+# 1. 客户端ID格式：GID_test@@@mac_address@@@uuid 或 GID_test@@@mac_address
+#    例如：GID_test@@@aa:bb:cc:dd:ee:ff@@@unique_uuid_123
+# 2. 连接地址：mqtt://your.server.ip:1883
+# 3. 音频传输：通过UDP加密传输，配置信息在hello消息中返回
+# 4. 消息格式：JSON格式，支持hello、音频、文本等消息类型
+#
+# 启用MQTT的配置示例：
+# protocols:
+#   enabled_protocols: ["websocket", "mqtt"]  # 同时启用两种协议
+#   mqtt_enabled: true
+# mqtt_server:
+#   enabled: true
+#   port: 1883
+#   public_endpoint: "your.server.ip"  # 替换为实际IP
 log:
   # 设置控制台输出的日志格式，时间、日志级别、标签、消息
   log_format: "<green>{time:YYMMDD HH:mm:ss}</green>[{version}_{selected_module}][<light-blue>{extra[tag]}</light-blue>]-<level>{level}</level>-<light-green>{message}</light-green>"

main/xiaozhi-server/core/api/native_mqtt_management_handler.py

@@ -0,0 +1,323 @@
+import copy
+import hashlib
+import hmac
+from datetime import datetime, timedelta, timezone
+from typing import Any, Dict, Optional
+
+from aiohttp import web
+
+from config.logger import setup_logging
+from core.providers.tools.device_mcp import call_mcp_tool
+from core.utils.mqtt_auth import normalize_signature_key
+from core.utils.util import sanitize_tool_name
+
+TAG = __name__
+
+
+class NativeMqttManagementHandler:
+    def __init__(self, config: Dict[str, Any], management_owner: Any):
+        self.config = config
+        self.management_owner = management_owner
+        self.logger = setup_logging()
+        mqtt_config = config.get("mqtt_server", {})
+        server_config = config.get("server", {})
+        self.signature_key = normalize_signature_key(
+            mqtt_config.get("manager_api_secret")
+            or mqtt_config.get("signature_key")
+            or server_config.get("mqtt_signature_key")
+        )
+        self.command_timeout = max(
+            0.1, float(mqtt_config.get("manager_command_timeout", 5) or 5)
+        )
+        self.max_status_ids = max(
+            1, int(mqtt_config.get("manager_max_status_ids", 1000) or 1000)
+        )
+
+    @staticmethod
+    def generate_daily_tokens(
+        signature_key: str, now: Optional[datetime] = None
+    ) -> set[str]:
+        normalized = normalize_signature_key(signature_key)
+        if not normalized:
+            return set()
+        current = now or datetime.now(timezone.utc)
+        utc_date = current.astimezone(timezone.utc).date()
+        return {
+            hashlib.sha256(
+                f"{utc_date + timedelta(days=offset)}{normalized}".encode(
+                    "utf-8"
+                )
+            ).hexdigest()
+            for offset in (-1, 0, 1)
+        }
+
+    def _is_authorized(self, authorization: str) -> bool:
+        if not self.signature_key:
+            return False
+        if not authorization or not authorization.startswith("Bearer "):
+            return False
+        provided = authorization[len("Bearer ") :].strip()
+        return any(
+            hmac.compare_digest(provided, expected)
+            for expected in self.generate_daily_tokens(self.signature_key)
+        )
+
+    def _authorize(self, request) -> Optional[web.Response]:
+        if not self.signature_key:
+            return self._error(
+                503,
+                "Native MQTT管理API未配置签名密钥",
+                "MANAGEMENT_AUTH_NOT_CONFIGURED",
+                False,
+            )
+        if not self._is_authorized(request.headers.get("Authorization", "")):
+            return self._error(
+                401, "无效的授权令牌", "UNAUTHORIZED", False
+            )
+        return None
+
+    @staticmethod
+    def _error(
+        status: int,
+        message: str,
+        code: str,
+        dispatch_attempted: bool,
+    ) -> web.Response:
+        return web.json_response(
+            {
+                "success": False,
+                "error": message,
+                "code": code,
+                "dispatchAttempted": dispatch_attempted,
+            },
+            status=status,
+        )
+
+    async def _read_json_object(self, request) -> Optional[Dict[str, Any]]:
+        try:
+            body = await request.json()
+        except Exception:
+            return None
+        return body if isinstance(body, dict) else None
+
+    async def handle_device_status(self, request) -> web.Response:
+        unauthorized = self._authorize(request)
+        if unauthorized is not None:
+            return unauthorized
+
+        body = await self._read_json_object(request)
+        client_ids = body.get("clientIds") if body else None
+        if (
+            not isinstance(client_ids, list)
+            or not client_ids
+            or len(client_ids) > self.max_status_ids
+            or any(
+                not isinstance(client_id, str) or not client_id
+                for client_id in client_ids
+            )
+        ):
+            return self._error(
+                400,
+                "clientIds必须是非空字符串数组且未超过数量限制",
+                "INVALID_CLIENT_IDS",
+                False,
+            )
+
+        get_status = getattr(
+            self.management_owner, "get_native_mqtt_status", None
+        )
+        if not callable(get_status):
+            return self._error(
+                503,
+                "Native MQTT管理服务未就绪",
+                "MANAGEMENT_NOT_READY",
+                False,
+            )
+        return web.json_response(await get_status(client_ids))
+
+    async def handle_command(self, request) -> web.Response:
+        unauthorized = self._authorize(request)
+        if unauthorized is not None:
+            return unauthorized
+
+        body = await self._read_json_object(request)
+        payload = (
+            body.get("payload")
+            if body and body.get("type") == "mcp"
+            else None
+        )
+        if not isinstance(payload, dict):
+            return self._error(
+                400, "指令类型无效", "INVALID_COMMAND", False
+            )
+
+        resolver = getattr(
+            self.management_owner, "resolve_native_mqtt_connection", None
+        )
+        if not callable(resolver):
+            return self._error(
+                503,
+                "Native MQTT管理服务未就绪",
+                "MANAGEMENT_NOT_READY",
+                False,
+            )
+
+        connection = await resolver(request.match_info.get("client_id", ""))
+        if connection is None:
+            return self._error(
+                404, "设备未连接", "DEVICE_OFFLINE", False
+            )
+
+        method = payload.get("method")
+        params = payload.get("params") or {}
+        if not isinstance(params, dict):
+            return self._error(
+                400, "MCP参数格式无效", "INVALID_MCP_PARAMS", False
+            )
+        if method == "tools/list":
+            return await self._list_tools(connection.context)
+        if method == "tools/call":
+            return await self._call_tool(connection.context, params)
+        return self._error(
+            422, "不支持的MCP方法", "UNSUPPORTED_MCP_METHOD", False
+        )
+
+    async def handle_call_request(self, request) -> web.Response:
+        unauthorized = self._authorize(request)
+        if unauthorized is not None:
+            return unauthorized
+
+        body = await self._read_json_object(request)
+        caller_mac = body.get("caller_mac") if body else None
+        target_mac = body.get("target_mac") if body else None
+        caller_nickname = body.get("caller_nickname", "") if body else ""
+        if (
+            not isinstance(caller_mac, str)
+            or not caller_mac.strip()
+            or not isinstance(target_mac, str)
+            or not target_mac.strip()
+            or not isinstance(caller_nickname, str)
+        ):
+            return web.json_response(
+                {
+                    "status": "error",
+                    "message": "缺少必要参数: caller_mac, target_mac",
+                },
+                status=400,
+            )
+
+        request_call = getattr(
+            self.management_owner, "request_native_mqtt_call", None
+        )
+        if not callable(request_call):
+            return web.json_response(
+                {"status": "error", "message": "Native MQTT呼叫服务未就绪"},
+                status=503,
+            )
+        result = await request_call(
+            caller_mac, target_mac, caller_nickname
+        )
+        return web.json_response(result)
+
+    async def handle_call_accept(self, request) -> web.Response:
+        unauthorized = self._authorize(request)
+        if unauthorized is not None:
+            return unauthorized
+
+        body = await self._read_json_object(request)
+        device_id = body.get("mac") if body else None
+        if not isinstance(device_id, str) or not device_id.strip():
+            return web.json_response(
+                {"status": "error", "message": "缺少必要参数: mac"},
+                status=400,
+            )
+
+        accept_call = getattr(
+            self.management_owner, "accept_native_mqtt_call", None
+        )
+        if not callable(accept_call):
+            return web.json_response(
+                {"status": "error", "message": "Native MQTT呼叫服务未就绪"},
+                status=503,
+            )
+        return web.json_response(await accept_call(device_id))
+
+    async def _list_tools(self, context) -> web.Response:
+        mcp_client = getattr(context, "mcp_client", None)
+        if mcp_client is None or not await mcp_client.is_ready():
+            return self._error(
+                503,
+                "设备MCP尚未准备就绪",
+                "MCP_NOT_READY",
+                False,
+            )
+
+        async with mcp_client.lock:
+            tools = [
+                copy.deepcopy(tool)
+                for tool in mcp_client.tools.values()
+            ]
+        return web.json_response(
+            {"success": True, "data": {"tools": tools}}
+        )
+
+    async def _call_tool(self, context, params: Dict[str, Any]) -> web.Response:
+        tool_name = params.get("name")
+        arguments = params.get("arguments", {})
+        if not isinstance(tool_name, str) or not tool_name:
+            return self._error(
+                422, "工具名称不能为空", "INVALID_TOOL_NAME", False
+            )
+        if not isinstance(arguments, dict):
+            return self._error(
+                422, "工具参数必须是对象", "INVALID_TOOL_ARGUMENTS", False
+            )
+
+        mcp_client = getattr(context, "mcp_client", None)
+        if mcp_client is None or not await mcp_client.is_ready():
+            return self._error(
+                503,
+                "设备MCP尚未准备就绪",
+                "MCP_NOT_READY",
+                False,
+            )
+
+        sanitized_name = sanitize_tool_name(tool_name)
+        if not mcp_client.has_tool(sanitized_name):
+            return self._error(
+                422, "设备不存在该工具", "TOOL_NOT_FOUND", False
+            )
+
+        try:
+            result = await call_mcp_tool(
+                context,
+                mcp_client,
+                sanitized_name,
+                arguments,
+                timeout=self.command_timeout,
+                return_raw=True,
+            )
+        except TimeoutError:
+            return self._error(
+                504, "工具调用请求超时", "COMMAND_TIMEOUT", True
+            )
+        except ConnectionError:
+            return self._error(
+                503, "设备连接已关闭", "DEVICE_DISCONNECTED", True
+            )
+        except ValueError as error:
+            return self._error(422, str(error), "INVALID_TOOL_CALL", False)
+        except Exception as error:
+            self.logger.bind(tag=TAG).warning(
+                "Native MQTT设备工具调用失败: {}", error
+            )
+            return self._error(
+                502, str(error), "TOOL_CALL_FAILED", True
+            )
+
+        data = (
+            result
+            if isinstance(result, dict)
+            else {"content": [{"type": "text", "text": str(result)}]}
+        )
+        return web.json_response({"success": True, "data": data})

main/xiaozhi-server/core/api/ota_handler.py

@@ -1,8 +1,6 @@
 import json
 import time
 import base64
-import hashlib
-import hmac
 import os
 import re
 import glob
@@ -11,6 +9,11 @@ from aiohttp import web
 
 from core.auth import AuthManager
 from core.utils.util import get_local_ip, get_vision_url
+from core.utils.mqtt_auth import (
+    generate_password_signature,
+    normalize_signature_key,
+    parse_mqtt_endpoint,
+)
 from core.api.base_handler import BaseHandler
 
 TAG = __name__
@@ -102,26 +105,6 @@ class OTAHandler(BaseHandler):
             self.logger.bind(tag=TAG).error(f"刷新固件缓存失败: {e}")
             # keep previous cache if any
 
-    def generate_password_signature(self, content: str, secret_key: str) -> str:
-        """生成MQTT密码签名
-
-        Args:
-            content: 签名内容 (clientId + '|' + username)
-            secret_key: 密钥
-
-        Returns:
-            str: Base64编码的HMAC-SHA256签名
-        """
-        try:
-            hmac_obj = hmac.new(
-                secret_key.encode("utf-8"), content.encode("utf-8"), hashlib.sha256
-            )
-            signature = hmac_obj.digest()
-            return base64.b64encode(signature).decode("utf-8")
-        except Exception as e:
-            self.logger.bind(tag=TAG).error(f"生成MQTT密码签名失败: {e}")
-            return ""
-
     def _get_websocket_url(self, local_ip: str, port: int) -> str:
         """获取websocket地址
 
@@ -231,11 +214,32 @@ class OTAHandler(BaseHandler):
                 },
             }
 
-            # existing mqtt/websocket logic (unchanged)
+            # ========== 协议下发逻辑 ==========
-            mqtt_gateway_endpoint = server_config.get("mqtt_gateway")
+            # 按照原版逻辑：总是下发 WebSocket，如果启用了 MQTT 则额外下发 MQTT 和 UDP
+            # 这样设备有回退能力：如果 MQTT 连接失败，还可以使用 WebSocket
 
-            if mqtt_gateway_endpoint:  # 如果配置了非空字符串
+            mqtt_server_config = self.config.get("mqtt_server", {})
-                # 尝试从请求数据中获取设备型号（已解析 above）
+            enabled_protocols = self.config.get("enabled_protocols")
+            if isinstance(enabled_protocols, list):
+                mqtt_protocol_enabled = "mqtt" in enabled_protocols
+            else:
+                protocol_config = self.config.get("protocols", {})
+                requested_protocols = protocol_config.get(
+                    "enabled_protocols", []
+                )
+                mqtt_protocol_enabled = (
+                    protocol_config.get("mqtt_enabled") is True
+                    or "mqtt" in requested_protocols
+                )
+            mqtt_server_enabled = bool(
+                mqtt_server_config.get("enabled") and mqtt_protocol_enabled
+            )
+            mqtt_gateway_endpoint = server_config.get("mqtt_gateway")
+            if not mqtt_gateway_endpoint or str(mqtt_gateway_endpoint).lower() == "null":
+                mqtt_gateway_endpoint = None
+
+            # 生成通用的 MQTT 凭证信息
+            def _build_mqtt_credentials():
                 try:
                     group_id = f"GID_{device_model}".replace(":", "_").replace(" ", "_")
                 except Exception as e:
@@ -246,56 +250,116 @@ class OTAHandler(BaseHandler):
                 mqtt_client_id = f"{group_id}@@@{mac_address_safe}@@@{mac_address_safe}"
 
                 # 构建用户数据
-                user_data = {"ip": "unknown"}
+                user_data = {"ip": local_ip}
                 try:
                     user_data_json = json.dumps(user_data)
-                    username = base64.b64encode(user_data_json.encode("utf-8")).decode(
+                    username = base64.b64encode(user_data_json.encode("utf-8")).decode("utf-8")
-                        "utf-8"
-                    )
                 except Exception as e:
                     self.logger.bind(tag=TAG).error(f"生成用户名失败: {e}")
                     username = ""
 
+                return group_id, mac_address_safe, mqtt_client_id, username
+
+            # ========== 1. 总是下发 WebSocket 配置（作为基础/回退方案）==========
+            ws_token = ""
+            if self.auth_enable:
+                if self.allowed_devices:
+                    if device_id not in self.allowed_devices:
+                        ws_token = self.auth.generate_token(client_id, device_id)
+                else:
+                    ws_token = self.auth.generate_token(client_id, device_id)
+
+            return_json["websocket"] = {
+                "url": self._get_websocket_url(local_ip, websocket_port),
+                "token": ws_token,
+            }
+
+            # ========== 2. 如果启用了原生 MQTT 服务器，额外下发 MQTT 配置 ==========
+            signature_key = normalize_signature_key(
+                mqtt_server_config.get("signature_key")
+                or server_config.get("mqtt_signature_key")
+            )
+            native_mqtt_ready = bool(mqtt_server_enabled and signature_key)
+            if mqtt_server_enabled and not signature_key:
+                self.logger.bind(tag=TAG).error(
+                    "原生MQTT已启用但未配置签名密钥，跳过Native配置下发"
+                )
+
+            if native_mqtt_ready:
+                try:
+                    mqtt_host, mqtt_port = parse_mqtt_endpoint(
+                        mqtt_server_config.get("public_endpoint"),
+                        int(mqtt_server_config.get("port", 1883)),
+                    )
+                except (TypeError, ValueError) as exc:
+                    self.logger.bind(tag=TAG).error(f"MQTT endpoint配置无效: {exc}")
+                    mqtt_host, mqtt_port = "", None
+
+                placeholder_keywords = ("localhost", "0.0.0.0", "your", "example")
+                if not mqtt_host or any(
+                    keyword in mqtt_host.lower() for keyword in placeholder_keywords
+                ):
+                    mqtt_host = local_ip
+                    self.logger.bind(tag=TAG).info(
+                        f"检测到 public_endpoint 为占位符，自动使用本地IP: {local_ip}"
+                    )
+
+                if mqtt_port is None:
+                    native_mqtt_ready = False
+
+            if native_mqtt_ready:
+
+                group_id, mac_address_safe, mqtt_client_id, username = _build_mqtt_credentials()
+
+                mqtt_password = generate_password_signature(
+                    mqtt_client_id + "|" + username, signature_key
+                )
+
+                return_json["mqtt"] = {
+                    "endpoint": f"{mqtt_host}:{mqtt_port}",
+                    "client_id": mqtt_client_id,
+                    "username": username,
+                    "password": mqtt_password,
+                    "publish_topic": "device-server",
+                    "subscribe_topic": f"devices/p2p/{mac_address_safe}",
+                }
+
+                self.logger.bind(tag=TAG).info(
+                    f"为设备 {device_id} 下发原生MQTT配置: {mqtt_host}:{mqtt_port}"
+                )
+
+            # ========== 3. 如果配置了外部 MQTT 网关，额外下发 MQTT 配置 ==========
+            elif mqtt_gateway_endpoint:
+                group_id, mac_address_safe, mqtt_client_id, username = _build_mqtt_credentials()
+
                 # 生成密码
-                password = ""
+                mqtt_password = ""
                 signature_key = server_config.get("mqtt_signature_key", "")
                 if signature_key:
-                    password = self.generate_password_signature(
+                    mqtt_password = generate_password_signature(
                         mqtt_client_id + "|" + username, signature_key
                     )
-                    if not password:
+                    if not mqtt_password:
-                        password = ""  # 签名失败则留空，由设备决定是否允许无密码
+                        mqtt_password = ""
                 else:
                     self.logger.bind(tag=TAG).warning("缺少MQTT签名密钥，密码留空")
 
-                # 构建MQTT配置（直接使用 mqtt_gateway 字符串）
                 return_json["mqtt"] = {
                     "endpoint": mqtt_gateway_endpoint,
                     "client_id": mqtt_client_id,
                     "username": username,
-                    "password": password,
+                    "password": mqtt_password,
                     "publish_topic": "device-server",
                     "subscribe_topic": f"devices/p2p/{mac_address_safe}",
                 }
-                self.logger.bind(tag=TAG).info(f"为设备 {device_id} 下发MQTT网关配置")
 
-            else:  # 未配置 mqtt_gateway，下发 WebSocket
+                self.logger.bind(tag=TAG).info(f"为设备 {device_id} 下发MQTT网关配置: {mqtt_gateway_endpoint}")
-                # 如果开启了认证，则进行认证校验
+
-                token = ""
+            # 记录最终下发的协议
-                if self.auth_enable:
+            protocols = ["websocket"]
-                    if self.allowed_devices:
+            if "mqtt" in return_json:
-                        if device_id not in self.allowed_devices:
+                protocols.append("mqtt")
-                            token = self.auth.generate_token(client_id, device_id)
+            self.logger.bind(tag=TAG).info(f"为设备 {device_id} 下发协议配置: {', '.join(protocols)}")
-                    else:
-                        token = self.auth.generate_token(client_id, device_id)
-                # NOTE: use websocket_port here
-                return_json["websocket"] = {
-                    "url": self._get_websocket_url(local_ip, websocket_port),
-                    "token": token,
-                }
-                self.logger.bind(tag=TAG).info(
-                    f"未配置MQTT网关，为设备 {device_id} 下发WebSocket配置"
-                )
 
             # Now check firmware files for updates
             try:

main/xiaozhi-server/core/http_server.py

@@ -1,6 +1,9 @@
 import asyncio
 from aiohttp import web
 from config.logger import setup_logging
+from core.api.native_mqtt_management_handler import (
+    NativeMqttManagementHandler,
+)
 from core.api.ota_handler import OTAHandler
 from core.api.vision_handler import VisionHandler
 
@@ -8,17 +11,32 @@ TAG = __name__
 
 
 class SimpleHttpServer:
-    def __init__(self, config: dict):
+    def __init__(self, config: dict, management_owner=None):
         self.config = config
+        self.management_owner = management_owner
         self.logger = setup_logging()
         self.ota_handler = OTAHandler(config)
         self.vision_handler = VisionHandler(config)
+        self.native_mqtt_management_handler = (
+            NativeMqttManagementHandler(config, management_owner)
+            if management_owner is not None and self._native_mqtt_enabled()
+            else None
+        )
         self._started_event = asyncio.Event()
         self._stop_event = asyncio.Event()
         self._runner = None
         self._start_active = False
         self._cleanup_lock = asyncio.Lock()
 
+    def _native_mqtt_enabled(self) -> bool:
+        mqtt_config = self.config.get("mqtt_server", {})
+        enabled_protocols = self.config.get("enabled_protocols", [])
+        return (
+            isinstance(mqtt_config, dict)
+            and mqtt_config.get("enabled") is True
+            and "mqtt" in enabled_protocols
+        )
+
     async def wait_started(self, task: asyncio.Task, timeout: float = 10) -> None:
         """Wait until the HTTP listener is bound or surface startup failure."""
         event_waiter = asyncio.create_task(self._started_event.wait())
@@ -71,7 +89,17 @@ class SimpleHttpServer:
             port = int(server_config.get("http_port", 8003))
 
             if port:
-                app = web.Application()
+                mqtt_config = self.config.get("mqtt_server", {})
+                client_max_size = max(
+                    1024,
+                    int(
+                        mqtt_config.get(
+                            "manager_max_request_size", 64 * 1024
+                        )
+                        or 64 * 1024
+                    ),
+                )
+                app = web.Application(client_max_size=client_max_size)
 
                 if not read_config_from_api:
                     # 如果没有开启智控台，只是单模块运行，就需要再添加简单OTA接口，用于下发websocket接口
@@ -105,6 +133,28 @@ class SimpleHttpServer:
                         ),
                     ]
                 )
+                if self.native_mqtt_management_handler is not None:
+                    app.add_routes(
+                        [
+                            web.post(
+                                "/api/devices/status",
+                                self.native_mqtt_management_handler.handle_device_status,
+                            ),
+                            web.post(
+                                "/api/commands/{client_id}",
+                                self.native_mqtt_management_handler.handle_command,
+                            ),
+                            web.post(
+                                "/api/call/request",
+                                self.native_mqtt_management_handler.handle_call_request,
+                            ),
+                            web.post(
+                                "/api/call/accept",
+                                self.native_mqtt_management_handler.handle_call_accept,
+                            ),
+                        ]
+                    )
+
                 # 运行服务
                 runner = web.AppRunner(app)
                 self._runner = runner

main/xiaozhi-server/core/processors/goodbye_processor.py

@@ -23,8 +23,20 @@ class GoodbyeProcessor(MessageProcessor):
 
         if isinstance(msg_json, dict) and msg_json.get("type") == "goodbye":
             logger.info(f"收到goodbye: session_id={msg_json.get('session_id')}")
-            # 长连接传输仅结束逻辑会话，短连接传输关闭连接。
+            # WebSocket 直接关闭连接；MQTT/UDP 仅结束音频会话，保持连接
             if transport.keeps_connection_between_sessions:
+                end_call = getattr(
+                    getattr(context, "server", None),
+                    "end_native_mqtt_call",
+                    None,
+                )
+                if callable(end_call):
+                    await end_call(
+                        context.device_id,
+                        "设备结束通话",
+                        notify_device=False,
+                        expected_session_id=msg_json.get("session_id"),
+                    )
                 end_conversation = getattr(context, "end_conversation", None)
                 if callable(end_conversation):
                     await end_conversation(msg_json.get("session_id"))

main/xiaozhi-server/core/processors/message_router.py

@@ -15,6 +15,7 @@ from core.processors.abort_processor import AbortProcessor
 from core.processors.goodbye_processor import GoodbyeProcessor
 from core.processors.text_processor import TextProcessor
 from core.processors.ping_processor import PingProcessor
+from core.processors.udp_timeout_processor import UdpTimeoutProcessor
 from config.logger import setup_logging
 
 logger = setup_logging()
@@ -40,6 +41,7 @@ class MessageRouter(MessageProcessor):
         self.audio_receive_processor = AudioReceiveProcessor()
         self.text_processor = TextProcessor()
         self.ping_processor = PingProcessor()
+        self.udp_timeout_processor = UdpTimeoutProcessor()
 
         # 按优先级排序的processor列表
         self.processors: List[MessageProcessor] = [
@@ -48,6 +50,7 @@ class MessageRouter(MessageProcessor):
             self.server_processor,     # 服务器消息（管理端下发动作）
             self.abort_processor,      # 中断消息
             self.goodbye_processor,    # goodbye消息
+            self.udp_timeout_processor,
             self.hello_processor,      # hello消息
             self.ping_processor,       # 可选JSON ping/pong心跳
             self.listen_processor,     # listen消息

main/xiaozhi-server/core/processors/timeout_processor.py

@@ -19,7 +19,7 @@ class TimeoutProcessor(MessageProcessor):
         context: SessionContext,
         transport: TransportInterface,
     ) -> bool:
-        """End an expired logical conversation without closing a long connection."""
+        """End an expired logical conversation without conflating it with MQTT."""
         if not getattr(context, "conversation_active", False):
             return False
 
@@ -29,7 +29,7 @@ class TimeoutProcessor(MessageProcessor):
 
         try:
             if transport.keeps_connection_between_sessions:
-                logger.info(f"会话超时，结束长连接逻辑会话: {context.session_id}")
+                logger.info(f"会话超时，结束MQTT逻辑会话: {context.session_id}")
                 from core.processors.audio_receive_processor import (
                     AudioReceiveProcessor,
                 )

main/xiaozhi-server/core/processors/udp_timeout_processor.py

@@ -0,0 +1,52 @@
+import json
+from typing import Any
+
+from core.context.session_context import SessionContext
+from core.pipeline.message_pipeline import MessageProcessor
+from core.transport.transport_interface import TransportInterface
+from config.logger import setup_logging
+
+logger = setup_logging()
+
+
+class UdpTimeoutProcessor(MessageProcessor):
+    async def process(
+        self,
+        context: SessionContext,
+        transport: TransportInterface,
+        message: Any,
+    ) -> bool:
+        if isinstance(message, str):
+            try:
+                message = json.loads(message)
+            except json.JSONDecodeError:
+                return False
+        if not isinstance(message, dict) or message.get("type") != "udp_timeout":
+            return False
+        if not transport.keeps_connection_between_sessions:
+            return False
+
+        logger.info(
+            "收到udp_timeout: session_id={}", message.get("session_id")
+        )
+        end_call = getattr(
+            getattr(context, "server", None),
+            "end_native_mqtt_call",
+            None,
+        )
+        call_ended = False
+        if callable(end_call):
+            call_ended = await end_call(
+                context.device_id,
+                "设备UDP接收超时",
+                notify_device=True,
+                expected_session_id=message.get("session_id"),
+            )
+        if not call_ended:
+            end_conversation = getattr(context, "end_conversation", None)
+            if callable(end_conversation):
+                await end_conversation(message.get("session_id"))
+            await transport.end_session(
+                message.get("session_id") or context.session_id
+            )
+        return True

main/xiaozhi-server/core/protocols/mqtt_connection.py

@@ -0,0 +1,649 @@
+import asyncio
+import json
+import time
+import uuid
+from typing import Dict, Any, Optional, Callable
+from config.logger import setup_logging
+from core.utils.mqtt_auth import validate_mqtt_credentials
+
+logger = setup_logging()
+
+
+class MQTTConnection:
+    """
+    MQTT连接处理类：管理单个MQTT客户端连接
+    处理MQTT协议消息和会话管理
+    """
+
+    def __init__(self, socket, connection_id: int, mqtt_server, udp_handler=None, reader=None, writer=None):
+        self.socket = socket
+        self.reader = reader
+        self.writer = writer
+        self.connection_id = connection_id
+        self.mqtt_server = mqtt_server
+        self.udp_handler = udp_handler
+
+        # 连接信息
+        self.client_id = None
+        self.device_id = None
+        self.username = None
+        self.password = None
+        self.session_id = None
+
+        # 协议状态
+        self.is_connected_flag = False
+        self.keep_alive_interval = 0
+        self.last_activity = time.monotonic()
+
+        # 消息处理
+        self.message_callback = None
+        self.reply_topic = None
+
+        # UDP相关
+        self.udp_config = None
+        self.message_queue_size = int(
+            getattr(mqtt_server, "message_queue_size", 128) or 128
+        )
+        self.business_ready_timeout = float(
+            getattr(mqtt_server, "business_ready_timeout", 30) or 30
+        )
+        self.close_timeout = max(
+            0.1, float(getattr(mqtt_server, "close_timeout", 2) or 2)
+        )
+        self.goodbye_timeout = max(
+            0.1, float(getattr(mqtt_server, "goodbye_timeout", 1) or 1)
+        )
+
+        # 任务管理
+        self.keep_alive_task = None
+        self.business_task = None
+        self._closed = False
+        self._close_task = None
+        self._close_initiator = None
+        self._close_complete = asyncio.Event()
+        self.connect_processed_event = asyncio.Event()
+        self.connect_accepted = False
+        self.business_ready_event = asyncio.Event()
+        self._hello_business_ready_event = None
+        self._hello_business_session_id = None
+        self._logical_hello_received = False
+        self._startup_recovery_task = None
+        self._session_transition_lock = asyncio.Lock()
+        self._last_goodbye_session_id = None
+        self._goodbye_lock = asyncio.Lock()
+
+        # 创建MQTT协议处理器
+        from core.protocols.mqtt_protocol import MQTTProtocol
+        self.protocol = MQTTProtocol(
+            socket=socket,
+            reader=reader,
+            writer=writer,
+            max_payload_size=getattr(mqtt_server, "max_payload_size", 8192),
+            event_queue_size=self.message_queue_size,
+            close_timeout=self.close_timeout,
+        )
+        self._setup_protocol_handlers()
+
+    def _setup_protocol_handlers(self):
+        """设置协议事件处理"""
+        self.protocol.on('connect', self._handle_connect)
+        self.protocol.on('publish', self._handle_publish)
+        self.protocol.on('subscribe', self._handle_subscribe)
+        self.protocol.on('disconnect', self._handle_disconnect)
+        self.protocol.on('close', self._handle_close)
+        self.protocol.on('error', self._handle_error)
+        self.protocol.on('protocolError', self._handle_error)
+        self.protocol.on('activity', self._handle_activity)
+
+    def _handle_activity(self):
+        """更新最近活动时间（用于心跳保活）"""
+        self.last_activity = time.monotonic()
+
+    async def _handle_connect(self, connect_data: Dict[str, Any]):
+        """处理CONNECT消息"""
+        try:
+            if self.connect_processed_event.is_set() or self.is_connected_flag:
+                logger.warning("同一TCP连接收到重复CONNECT，关闭连接")
+                await self.close()
+                return
+            self.client_id = connect_data['clientId']
+            self.username = connect_data.get('username')
+            self.password = connect_data.get('password')
+            self.keep_alive_interval = connect_data.get('keepAlive', 0) * 1000  # 转换为毫秒
+
+            logger.info(f"MQTT客户端连接: {self.client_id}")
+
+            try:
+                validate_mqtt_credentials(
+                    self.client_id,
+                    self.username,
+                    self.password,
+                    self.mqtt_server.signature_key,
+                )
+            except ValueError as e:
+                logger.warning(f"MQTT客户端认证失败: {self.client_id}, {e}")
+                await self.protocol.send_connack(4)
+                self.connect_processed_event.set()
+                await self.close()
+                return False
+
+            # 解析客户端ID获取设备信息
+            if not self._parse_client_id():
+                await self.protocol.send_connack(1)  # 连接被拒绝
+                self.connect_processed_event.set()
+                await self.close()
+                return False
+
+            # 生成会话ID
+            self.session_id = str(uuid.uuid4())
+
+            # 设置回复主题
+            self.reply_topic = f"devices/p2p/{self.device_id.replace(':', '_')}"
+
+            async def complete_acceptance():
+                # Keep this inside the server's per-client takeover lock. A
+                # newer connection cannot reclaim this clientId between the
+                # success CONNACK and publishing the active owner.
+                self.is_connected_flag = True
+                try:
+                    await self.protocol.send_connack(0)
+                except Exception:
+                    self.is_connected_flag = False
+                    raise
+                if self.keep_alive_interval > 0:
+                    self.keep_alive_task = asyncio.create_task(
+                        self._keep_alive_check()
+                    )
+                self.connect_accepted = True
+
+            accepted = await self.mqtt_server.on_client_connected(
+                self, complete_acceptance
+            )
+            if not accepted:
+                if not self._closed:
+                    await self.protocol.send_connack(3)  # 服务端暂不可用
+                self.connect_processed_event.set()
+                await self.close()
+                return False
+            self.connect_processed_event.set()
+            return True
+
+        except Exception as e:
+            logger.error(f"处理CONNECT消息失败: {e}")
+            self.connect_processed_event.set()
+            await self.close()
+            return False
+
+    def _parse_client_id(self) -> bool:
+        """解析客户端ID获取设备信息"""
+        try:
+            # 支持格式: GID_test@@@mac_address@@@uuid 或 GID_test@@@mac_address
+            parts = self.client_id.split('@@@')
+
+            if len(parts) >= 2:
+                self.group_id = parts[0]
+                # 将设备标识统一为服务端使用的MAC地址格式
+                self.device_id = (
+                    parts[1].replace('_', ':').replace('-', ':').lower()
+                )
+
+                if len(parts) >= 3:
+                    self.uuid = parts[2]
+
+                return True
+            else:
+                logger.error(f"无效的客户端ID格式: {self.client_id}")
+                return False
+
+        except Exception as e:
+            logger.error(f"解析客户端ID失败: {e}")
+            return False
+
+    async def _handle_publish(self, publish_data: Dict[str, Any]):
+        """处理PUBLISH消息"""
+        try:
+            if publish_data.get('qos', 0) != 0:
+                logger.warning(
+                    f"不支持的MQTT QoS级别: {publish_data.get('qos')}"
+                )
+                await self.close()
+                return
+            topic = publish_data['topic']
+            payload = publish_data['payload']
+
+            logger.debug(f"收到MQTT发布消息: topic={topic}, payload={payload}")
+
+            # 更新活动时间
+            self.last_activity = time.monotonic()
+
+            # 解析JSON消息
+            try:
+                message_data = json.loads(payload)
+
+                # 处理不同类型的消息
+                if message_data.get('type') == 'hello':
+                    if message_data.get('version', 3) != 3:
+                        logger.warning(
+                            f"不支持的MQTT协议版本: {message_data.get('version')}"
+                        )
+                        await self.close()
+                        return
+                    await self._handle_hello_message(message_data)
+                else:
+                    # 其他消息通过回调处理
+                    if self.message_callback:
+                        self.message_callback(topic, payload)
+
+            except json.JSONDecodeError:
+                logger.error(f"MQTT消息JSON解析失败: {payload}")
+
+        except Exception as e:
+            logger.error(f"处理PUBLISH消息失败: {e}")
+
+    async def _handle_hello_message(self, message_data: Dict[str, Any]):
+        """处理hello消息，初始化UDP配置"""
+        async with self._session_transition_lock:
+            self._logical_hello_received = True
+        try:
+            handle_logical_hello = getattr(
+                self.mqtt_server, "handle_logical_hello", None
+            )
+            if callable(handle_logical_hello):
+                await handle_logical_hello(self)
+            # Match the gateway contract: do not advertise a usable audio
+            # channel until private config and runtime components are ready.
+            await asyncio.wait_for(
+                self.business_ready_event.wait(),
+                timeout=self.business_ready_timeout,
+            )
+            if self._closed or not self.is_connected_flag:
+                return
+            hello_reply = self._prepare_hello_reply(
+                message_data.get('audio_params', {}),
+                message_data.get('version', 3),
+            )
+            hello_ready = asyncio.Event()
+            self._hello_business_ready_event = hello_ready
+            self._hello_business_session_id = self.session_id
+
+            # Enqueue the logical-session boundary before the device can react
+            # to the reply with UDP audio.
+            if self.message_callback:
+                try:
+                    self.message_callback(self.reply_topic, json.dumps(message_data))
+                except Exception as e:
+                    logger.error(f"转发hello消息失败: {e}")
+
+            # Long-lived MQTT connections can change Agent configuration at
+            # each logical Hello. Do not expose the new UDP session until the
+            # business runtime has either refreshed or deliberately retained
+            # the previous healthy runtime.
+            await asyncio.wait_for(
+                hello_ready.wait(),
+                timeout=self.business_ready_timeout,
+            )
+            if self._closed or not self.is_connected_flag:
+                return
+            await self.send_message(self.reply_topic, json.dumps(hello_reply))
+
+            logger.info(f"MQTT Hello消息处理完成: {self.client_id}")
+
+        except asyncio.TimeoutError:
+            logger.error(
+                f"MQTT Hello等待业务运行时超时: {self.client_id}, "
+                f"timeout={self.business_ready_timeout}s"
+            )
+            await self.close()
+        except Exception as e:
+            logger.error(f"处理hello消息失败: {e}")
+        finally:
+            self._hello_business_ready_event = None
+            self._hello_business_session_id = None
+
+    def schedule_stale_session_recovery(self, delay: float = 1.0) -> None:
+        """Return a reconnected device with a stale UDP session to Idle."""
+        if self._startup_recovery_task is not None:
+            return
+        self._startup_recovery_task = asyncio.create_task(
+            self._recover_stale_session(delay)
+        )
+
+    async def _recover_stale_session(self, delay: float) -> None:
+        try:
+            await asyncio.sleep(max(0.0, delay))
+            async with self._session_transition_lock:
+                if (
+                    self._closed
+                    or not self.is_connected_flag
+                    or self._logical_hello_received
+                    or not self.reply_topic
+                ):
+                    return
+                # No session id is intentional: firmware accepts this as a
+                # connection-level reset and discards an UDP session owned by
+                # a previous server process. Serialize it with Hello so this
+                # reset can never overtake a newly negotiated session.
+                await self.send_message(
+                    self.reply_topic,
+                    json.dumps({"type": "goodbye"}),
+                )
+                logger.info("已通知重连MQTT设备清理旧UDP会话: {}", self.client_id)
+        except asyncio.CancelledError:
+            pass
+        except Exception as e:
+            logger.warning("通知重连MQTT设备清理旧会话失败: {}", e)
+
+    def mark_business_session_ready(self, session_id: str = None) -> None:
+        """Acknowledge readiness for the currently pending logical Hello."""
+        event = self._hello_business_ready_event
+        pending_session_id = self._hello_business_session_id
+        if event is None:
+            return
+        if session_id is not None and pending_session_id != session_id:
+            return
+        event.set()
+
+    async def send_hello_reply(self, audio_params: Dict[str, Any], version: int = 3):
+        """发送hello回复（可在未收到设备hello时调用）"""
+        hello_reply = self._prepare_hello_reply(audio_params, version)
+        await self.send_message(self.reply_topic, json.dumps(hello_reply))
+
+    def _prepare_hello_reply(self, audio_params: Dict[str, Any], version: int = 3):
+        """Create and install one UDP session without publishing it yet."""
+        import os
+
+        self.session_id = str(uuid.uuid4())
+        self._last_goodbye_session_id = None
+        udp_session_id = self.mqtt_server.bind_udp_session(
+            self, self.udp_handler
+        )
+        nonce = self._generate_udp_header(
+            0, 0, 0, connection_id=udp_session_id
+        )
+        self.udp_config = {
+            'key': os.urandom(16),
+            'encryption': 'aes-128-ctr',
+            'server': self.mqtt_server.public_endpoint,
+            'port': self.mqtt_server.udp_port,
+            'nonce': nonce,
+            'local_sequence': 0,
+            'remote_sequence': 0
+        }
+        if self.udp_handler:
+            self.udp_handler.configure_encryption(self.udp_config)
+
+        configured_audio_params = (
+            getattr(self.mqtt_server, 'config', {})
+            .get('xiaozhi', {})
+            .get('audio_params', {})
+        )
+        hello_reply = {
+            'type': 'hello',
+            'version': version,
+            'session_id': self.session_id,
+            'transport': 'udp',
+            'udp': {
+                'server': self.udp_config['server'],
+                'port': self.udp_config['port'],
+                'encryption': self.udp_config['encryption'],
+                'key': self.udp_config['key'].hex(),
+                'nonce': nonce.hex()
+            },
+            'audio_params': configured_audio_params or audio_params or {}
+        }
+
+        return hello_reply
+
+    def _generate_udp_header(
+        self, length: int, timestamp: int, sequence: int,
+        connection_id: int = None
+    ) -> bytes:
+        header = bytearray(16)
+        header[0] = 1  # type
+        header[2:4] = length.to_bytes(2, 'big')
+        udp_connection_id = connection_id or self.connection_id
+        header[4:8] = udp_connection_id.to_bytes(4, 'big')
+        header[8:12] = timestamp.to_bytes(4, 'big')
+        header[12:16] = sequence.to_bytes(4, 'big')
+        return bytes(header)
+
+    async def _handle_subscribe(self, subscribe_data: Dict[str, Any]):
+        """处理SUBSCRIBE消息"""
+        try:
+            topic = subscribe_data['topic']
+            packet_id = subscribe_data['packetId']
+
+            logger.debug(f"客户端订阅主题: {topic}")
+
+            # 发送订阅确认
+            await self.protocol.send_suback(packet_id, 0)
+
+        except Exception as e:
+            logger.error(f"处理SUBSCRIBE消息失败: {e}")
+
+    async def _handle_disconnect(self):
+        """处理DISCONNECT消息"""
+        logger.info(f"客户端主动断开连接: {self.client_id}")
+        await self.close()
+
+    async def _handle_close(self):
+        """处理连接关闭"""
+        logger.info(f"MQTT连接关闭: {self.client_id}")
+        await self.close()
+
+    async def _handle_error(self, error):
+        """处理连接错误"""
+        logger.error(f"MQTT连接错误: {self.client_id}, error: {error}")
+        await self.close()
+
+    async def _keep_alive_check(self):
+        """心跳检查任务"""
+        try:
+            while self.is_connected_flag and not self._closed:
+                await asyncio.sleep(self.keep_alive_interval / 1000 / 2)  # 检查间隔为心跳间隔的一半
+
+                current_time = time.monotonic()
+                if current_time - self.last_activity > self.keep_alive_interval / 1000 * 1.5:
+                    logger.info(f"MQTT客户端心跳超时: {self.client_id}")
+                    try:
+                        await asyncio.wait_for(
+                            self.notify_device_idle(),
+                            timeout=self.goodbye_timeout,
+                        )
+                    except Exception as e:
+                        logger.warning(
+                            "MQTT心跳超时发送goodbye失败，继续关闭连接: {}", e
+                        )
+                    finally:
+                        await self.close()
+                    break
+
+        except asyncio.CancelledError:
+            pass
+        except Exception as e:
+            logger.error(f"心跳检查任务出错: {e}")
+
+    def set_message_callback(self, callback: Callable[[str, str], None]):
+        """设置消息接收回调"""
+        self.message_callback = callback
+
+    async def send_message(self, topic: str, payload: str):
+        """发送MQTT消息"""
+        if self._closed or not self.is_connected_flag:
+            raise RuntimeError("MQTT connection is closed")
+
+        try:
+            await self.protocol.send_publish(topic, payload, qos=0)
+            logger.debug(f"发送MQTT消息: topic={topic}, payload={payload}")
+
+        except Exception as e:
+            logger.error(f"发送MQTT消息失败: {e}")
+            raise
+
+    async def notify_device_idle(self, session_id: str = None) -> bool:
+        """Send one session-scoped goodbye before the physical MQTT close."""
+        async with self._goodbye_lock:
+            target_session_id = session_id or self.session_id
+            if (
+                self._closed
+                or not self.is_connected_flag
+                or not self.udp_config
+                or not self.reply_topic
+                or not target_session_id
+                or self._last_goodbye_session_id == target_session_id
+            ):
+                return False
+
+            await self.send_message(
+                self.reply_topic,
+                json.dumps(
+                    {"type": "goodbye", "session_id": target_session_id}
+                ),
+            )
+            self._last_goodbye_session_id = target_session_id
+            return True
+
+    def is_connected(self) -> bool:
+        """检查连接状态"""
+        return self.is_connected_flag and not self._closed
+
+    async def close(self):
+        """关闭连接"""
+        if not self._closed:
+            self._closed = True
+            self.is_connected_flag = False
+            self.connect_processed_event.set()
+            self.business_ready_event.set()
+            if self._hello_business_ready_event is not None:
+                self._hello_business_ready_event.set()
+            # Run cleanup in a dedicated task. Shielding it lets a cancelled
+            # first caller leave without falsely completing the close barrier;
+            # later callers can still await the same cleanup owner.
+            self._close_initiator = asyncio.current_task()
+            self._close_task = asyncio.create_task(self._close_impl())
+
+        close_task = self._close_task
+        if close_task is None:
+            return
+
+        current_task = asyncio.current_task()
+        dependency_tasks = {
+            close_task,
+            getattr(self.protocol, "_processing_task", None),
+            getattr(self.protocol, "_dispatch_task", None),
+        }
+        if self.business_task is not self._close_initiator:
+            dependency_tasks.add(self.business_task)
+        if self.keep_alive_task is not self._close_initiator:
+            dependency_tasks.add(self.keep_alive_task)
+        # The dedicated closer can be waiting for these tasks. Let them unwind
+        # instead of creating a reverse wait cycle.
+        if current_task in dependency_tasks:
+            return
+        await asyncio.shield(close_task)
+
+    async def _close_impl(self):
+        """Own and complete physical cleanup independently of caller lifetime."""
+        try:
+            current_task = asyncio.current_task()
+
+            # The socket/protocol task can time out while ConnectionService is
+            # blocked in private config or component initialization. Cancel the
+            # owning server task so its finally block releases the SessionContext
+            # and any partially initialized runtime instead of leaking per retry.
+            if (
+                self.business_task
+                and self.business_task is not current_task
+                and self.business_task is not self._close_initiator
+                and not self.business_task.done()
+            ):
+                self.business_task.cancel()
+                # The business owner's finally block calls back into server
+                # cleanup. Waiting for it here would create a close cycle:
+                # close -> business finally -> transport.close -> close.
+                # Give cancellation one loop turn, then let it unwind
+                # independently while the physical socket is released.
+                await asyncio.sleep(0)
+                if not self.business_task.done():
+                    tracker = getattr(
+                        self.mqtt_server, "track_draining_task", None
+                    )
+                    if callable(tracker):
+                        tracker(self.business_task, "MQTT业务任务")
+                    else:
+                        self.business_task.add_done_callback(
+                            lambda task: self._consume_background_task(
+                                task, "MQTT业务任务"
+                            )
+                        )
+
+            # 取消心跳检查任务
+            if (
+                self.keep_alive_task
+                and self.keep_alive_task is not current_task
+                and self.keep_alive_task is not self._close_initiator
+                and not self.keep_alive_task.done()
+            ):
+                self.keep_alive_task.cancel()
+                await self._wait_cancelled_task(
+                    self.keep_alive_task, "MQTT心跳任务"
+                )
+
+            if (
+                self._startup_recovery_task
+                and self._startup_recovery_task is not current_task
+                and not self._startup_recovery_task.done()
+            ):
+                self._startup_recovery_task.cancel()
+                await self._wait_cancelled_task(
+                    self._startup_recovery_task, "MQTT会话恢复任务"
+                )
+
+            # 关闭协议处理器
+            try:
+                await asyncio.wait_for(
+                    self.protocol.close(),
+                    timeout=self.close_timeout,
+                )
+            except asyncio.TimeoutError:
+                logger.warning("关闭MQTT协议处理器超时，强制中止socket")
+                abort = getattr(self.protocol, "abort", None)
+                if callable(abort):
+                    abort()
+            except (asyncio.CancelledError, Exception) as e:
+                logger.error(f"关闭MQTT协议处理器失败: {e}")
+
+            # Publish disconnect only after the physical protocol close barrier.
+            try:
+                await self.mqtt_server.on_client_disconnected(self)
+            except (asyncio.CancelledError, Exception) as e:
+                logger.error(f"通知服务器连接关闭失败: {e}")
+
+            logger.info(f"MQTT连接已关闭: {self.client_id}")
+        finally:
+            self._close_complete.set()
+
+    async def _wait_cancelled_task(self, task: asyncio.Task, label: str) -> None:
+        done, _ = await asyncio.wait({task}, timeout=self.close_timeout)
+        if task not in done:
+            logger.warning(
+                "{}取消后{}秒仍未退出，继续释放物理连接",
+                label,
+                self.close_timeout,
+            )
+            return
+        try:
+            task.result()
+        except asyncio.CancelledError:
+            pass
+        except Exception as exc:
+            logger.error(f"{label}退出失败: {exc}")
+
+    @staticmethod
+    def _consume_background_task(task: asyncio.Task, label: str) -> None:
+        try:
+            task.result()
+        except asyncio.CancelledError:
+            pass
+        except Exception as exc:
+            logger.error(f"{label}退出失败: {exc}")

main/xiaozhi-server/core/protocols/mqtt_protocol.py

@@ -0,0 +1,651 @@
+import asyncio
+from typing import Dict, Any, Callable
+from config.logger import setup_logging
+
+logger = setup_logging()
+
+
+# MQTT 固定头部的类型
+class PacketType:
+    CONNECT = 1
+    CONNACK = 2
+    PUBLISH = 3
+    SUBSCRIBE = 8
+    SUBACK = 9
+    PINGREQ = 12
+    PINGRESP = 13
+    DISCONNECT = 14
+
+
+class MQTTProtocol:
+    """
+    MQTT协议处理器：负责MQTT协议的解析和封装
+    """
+
+    def __init__(
+        self,
+        socket=None,
+        reader=None,
+        writer=None,
+        max_payload_size=8192,
+        event_queue_size=128,
+        close_timeout=2,
+    ):
+        self.socket = socket
+        self.reader = reader
+        self.writer = writer
+        self.buffer = b''
+        self.event_handlers = {}
+        self.is_connected = False
+        self.keep_alive_interval = 0
+        self.last_activity = 0
+        self.max_payload_size = int(max_payload_size or 0)
+        self.close_timeout = max(0.1, float(close_timeout or 2))
+        self._closed = False
+        self._application_queue = asyncio.Queue(
+            maxsize=max(1, int(event_queue_size or 128))
+        )
+
+        # Application publishes stay ordered, while PINGREQ remains on the read
+        # loop so a slow Hello/runtime refresh cannot starve MQTT keepalive.
+        self._dispatch_task = asyncio.create_task(
+            self._dispatch_application_messages()
+        )
+        self._processing_task = asyncio.create_task(self._process_messages())
+
+    def on(self, event: str, handler: Callable):
+        """注册事件处理器"""
+        self.event_handlers[event] = handler
+
+    def emit(self, event: str, *args, **kwargs):
+        """触发事件"""
+        handler = self.event_handlers.get(event)
+        if handler:
+            if asyncio.iscoroutinefunction(handler):
+                asyncio.create_task(handler(*args, **kwargs))
+            else:
+                handler(*args, **kwargs)
+
+    async def emit_async(self, event: str, *args, **kwargs):
+        """Emit protocol events in packet order."""
+        handler = self.event_handlers.get(event)
+        if not handler:
+            return None
+        result = handler(*args, **kwargs)
+        if asyncio.iscoroutine(result):
+            return await result
+        return result
+
+    async def _process_messages(self):
+        """处理消息的主循环"""
+        try:
+            while not self._closed:
+                # 从socket读取数据
+                data = await self._read_socket()
+                if not data:
+                    break
+
+                # 添加到缓冲区
+                self.buffer += data
+
+                # 处理缓冲区中的消息
+                await self._process_buffer()
+
+        except asyncio.CancelledError:
+            pass
+        except Exception as e:
+            logger.error(f"MQTT消息处理循环出错: {e}")
+            self.emit('error', e)
+        finally:
+            if not self._closed:
+                if self._dispatch_task.done():
+                    await self.emit_async('close')
+                else:
+                    # Preserve parsed QoS0 publishes before a normal peer EOF.
+                    # The Hello/runtime barrier is separately time-bounded.
+                    await self._application_queue.put({'type': 'peer_close'})
+
+    async def _dispatch_application_messages(self):
+        """Dispatch non-heartbeat packets sequentially outside the read loop."""
+        try:
+            while not self._closed:
+                message = await self._application_queue.get()
+                try:
+                    await self._dispatch_application_message(message)
+                finally:
+                    self._application_queue.task_done()
+        except asyncio.CancelledError:
+            pass
+        except Exception as e:
+            logger.error(f"MQTT应用消息处理循环出错: {e}")
+            self.emit('error', e)
+
+    async def _dispatch_application_message(self, message: Dict[str, Any]):
+        message_type = message.get('type')
+        if message_type == 'publish':
+            await self.emit_async('publish', message)
+        elif message_type == 'disconnect':
+            await self.emit_async('disconnect')
+            self.is_connected = False
+        elif message_type == 'peer_close':
+            await self.emit_async('close')
+        else:
+            raise ValueError(f"不支持的MQTT应用消息类型: {message_type}")
+
+    def _enqueue_application_message(self, message: Dict[str, Any]) -> None:
+        try:
+            self._application_queue.put_nowait(message)
+        except asyncio.QueueFull as exc:
+            raise ValueError("MQTT应用消息队列已满") from exc
+
+    async def _read_socket(self) -> bytes:
+        """从socket读取数据"""
+        try:
+            if self.reader is not None:
+                return await self.reader.read(4096)
+            # 使用asyncio的socket读取
+            loop = asyncio.get_event_loop()
+            data = await loop.sock_recv(self.socket, 4096)
+            return data
+        except Exception as e:
+            logger.error(f"读取socket数据失败: {e}")
+            return b''
+
+    async def _process_buffer(self):
+        """处理缓冲区中的消息"""
+        while len(self.buffer) >= 2:  # 至少需要2字节开始解析
+            try:
+                # 解析消息
+                message_length, message = self._parse_message()
+                if message_length == 0:
+                    break  # 消息不完整，等待更多数据
+
+                # 从缓冲区移除已处理的消息
+                self.buffer = self.buffer[message_length:]
+
+                # 处理消息
+                await self._handle_message(message)
+
+            except Exception as e:
+                logger.error(f"处理MQTT消息失败: {e}")
+                self.emit('protocolError', e)
+                break
+
+    def _parse_message(self) -> tuple[int, Dict[str, Any]]:
+        """解析MQTT消息"""
+        if len(self.buffer) < 2:
+            return 0, {}
+
+        # 获取消息类型
+        first_byte = self.buffer[0]
+        packet_type = (first_byte >> 4)
+        client_packet_types = {
+            PacketType.CONNECT,
+            PacketType.PUBLISH,
+            PacketType.SUBSCRIBE,
+            PacketType.PINGREQ,
+            PacketType.DISCONNECT,
+        }
+        if packet_type not in client_packet_types:
+            raise ValueError(f"不支持的客户端MQTT消息类型: {packet_type}")
+        fixed_flags = first_byte & 0x0F
+        expected_flags = {
+            PacketType.CONNECT: 0,
+            PacketType.SUBSCRIBE: 2,
+            PacketType.PINGREQ: 0,
+            PacketType.DISCONNECT: 0,
+        }
+        if (
+            packet_type in expected_flags
+            and fixed_flags != expected_flags[packet_type]
+        ):
+            raise ValueError(
+                f"MQTT packet type {packet_type} has invalid fixed-header flags "
+                f"0x{fixed_flags:x}"
+            )
+        if packet_type == PacketType.PUBLISH and ((first_byte >> 1) & 0x03) == 3:
+            raise ValueError("MQTT PUBLISH QoS 3 is invalid")
+
+        # 解析剩余长度
+        remaining_length, bytes_read = self._decode_remaining_length()
+        if remaining_length == -1:
+            return 0, {}  # 长度解析失败，等待更多数据
+        max_payload_size = getattr(self, "max_payload_size", 0)
+        if max_payload_size > 0 and remaining_length > max_payload_size:
+            raise ValueError(
+                f"MQTT remaining length {remaining_length} exceeds limit {max_payload_size}"
+            )
+
+        # 计算完整消息长度
+        total_length = 1 + bytes_read + remaining_length
+
+        if len(self.buffer) < total_length:
+            return 0, {}  # 消息不完整
+
+        if (
+            packet_type in (PacketType.PINGREQ, PacketType.DISCONNECT)
+            and remaining_length != 0
+        ):
+            raise ValueError(
+                f"MQTT packet type {packet_type} requires remaining length 0"
+            )
+
+        # 提取消息数据
+        message_data = self.buffer[:total_length]
+
+        # 根据消息类型解析
+        if packet_type == PacketType.CONNECT:
+            message = self._parse_connect(message_data)
+        elif packet_type == PacketType.PUBLISH:
+            message = self._parse_publish(message_data)
+        elif packet_type == PacketType.SUBSCRIBE:
+            message = self._parse_subscribe(message_data)
+        elif packet_type == PacketType.PINGREQ:
+            message = {'type': 'pingreq'}
+        elif packet_type == PacketType.DISCONNECT:
+            message = {'type': 'disconnect'}
+        else:
+            logger.warning(f"未处理的MQTT消息类型: {packet_type}")
+            message = {'type': 'unknown', 'packet_type': packet_type}
+
+        return total_length, message
+
+    def _decode_remaining_length(self) -> tuple[int, int]:
+        """解码剩余长度字段"""
+        multiplier = 1
+        value = 0
+        bytes_read = 0
+
+        while bytes_read < 4:
+            if bytes_read + 1 >= len(self.buffer):
+                return -1, 0
+            digit = self.buffer[bytes_read + 1]
+            bytes_read += 1
+
+            value += (digit & 127) * multiplier
+            multiplier *= 128
+
+            if (digit & 128) == 0:
+                return value, bytes_read
+            if bytes_read == 4:
+                raise ValueError("MQTT remaining length字段超过4字节")
+
+        raise ValueError("MQTT remaining length字段无效")
+
+    def _encode_remaining_length(self, length: int) -> bytes:
+        """编码剩余长度字段"""
+        result = bytearray()
+
+        while True:
+            digit = length % 128
+            length = length // 128
+
+            if length > 0:
+                digit |= 0x80
+
+            result.append(digit)
+
+            if length == 0:
+                break
+
+        return bytes(result)
+
+    def _parse_connect(self, message_data: bytes) -> Dict[str, Any]:
+        """解析CONNECT消息"""
+        try:
+            # 跳过固定头部和剩余长度
+            _, bytes_read = self._decode_remaining_length()
+            pos = 1 + bytes_read
+
+            def read_bytes(binary=False):
+                nonlocal pos
+                if pos + 2 > len(message_data):
+                    raise ValueError("MQTT CONNECT字符串长度字段不完整")
+                value_length = int.from_bytes(message_data[pos:pos + 2], 'big')
+                pos += 2
+                if pos + value_length > len(message_data):
+                    raise ValueError("MQTT CONNECT字符串内容不完整")
+                value = message_data[pos:pos + value_length]
+                pos += value_length
+                return value if binary else value.decode('utf-8')
+
+            protocol = read_bytes()
+
+            # 协议级别
+            if pos + 4 > len(message_data):
+                raise ValueError("MQTT CONNECT可变头部不完整")
+            protocol_level = message_data[pos]
+            pos += 1
+            if protocol != 'MQTT' or protocol_level != 4:
+                raise ValueError(
+                    f"不支持的MQTT协议: {protocol}/{protocol_level}"
+                )
+
+            # 连接标志
+            connect_flags = message_data[pos]
+            if connect_flags & 0x01:
+                raise ValueError("MQTT CONNECT保留标志必须为0")
+            has_username = (connect_flags & 0x80) != 0
+            has_password = (connect_flags & 0x40) != 0
+            will_retain = (connect_flags & 0x20) != 0
+            will_qos = (connect_flags >> 3) & 0x03
+            has_will = (connect_flags & 0x04) != 0
+            clean_session = (connect_flags & 0x02) != 0
+            if has_password and not has_username:
+                raise ValueError("MQTT CONNECT密码标志要求用户名标志")
+            if will_qos == 3:
+                raise ValueError("MQTT CONNECT Will QoS 3无效")
+            if not has_will and (will_retain or will_qos):
+                raise ValueError("MQTT CONNECT未启用Will但设置了Will标志")
+            pos += 1
+
+            # 保持连接时间
+            keep_alive = int.from_bytes(message_data[pos:pos+2], 'big')
+            pos += 2
+
+            client_id = read_bytes()
+            if not client_id and not clean_session:
+                raise ValueError("MQTT CONNECT空clientId必须启用clean session")
+
+            if has_will:
+                read_bytes()  # Will topic
+                read_bytes(binary=True)  # Will payload
+
+            # 用户名（如果存在）
+            username = ''
+            if has_username:
+                username = read_bytes()
+
+            # 密码（如果存在）
+            password = ''
+            if has_password:
+                password = read_bytes(binary=True).decode('utf-8')
+
+            if pos != len(message_data):
+                raise ValueError("MQTT CONNECT包含未解析的尾部数据")
+
+            return {
+                'type': 'connect',
+                'protocol': protocol,
+                'protocolLevel': protocol_level,
+                'clientId': client_id,
+                'keepAlive': keep_alive,
+                'username': username,
+                'password': password
+            }
+
+        except Exception as e:
+            logger.error(f"解析CONNECT消息失败: {e}")
+            raise
+
+    def _parse_publish(self, message_data: bytes) -> Dict[str, Any]:
+        """解析PUBLISH消息"""
+        try:
+            # 获取QoS等标志
+            first_byte = message_data[0]
+            qos = (first_byte & 0x06) >> 1
+            dup = (first_byte & 0x08) != 0
+            retain = (first_byte & 0x01) != 0
+
+            # 跳过固定头部和剩余长度
+            _, bytes_read = self._decode_remaining_length()
+            pos = 1 + bytes_read
+
+            # 主题长度
+            if pos + 2 > len(message_data):
+                raise ValueError("MQTT PUBLISH缺少主题长度")
+            topic_length = int.from_bytes(message_data[pos:pos+2], 'big')
+            pos += 2
+            if topic_length == 0 or pos + topic_length > len(message_data):
+                raise ValueError("MQTT PUBLISH主题为空或不完整")
+
+            # 主题
+            topic = message_data[pos:pos+topic_length].decode('utf-8')
+            pos += topic_length
+            if "\x00" in topic or "+" in topic or "#" in topic:
+                raise ValueError("MQTT PUBLISH主题名称无效")
+
+            # 消息ID（QoS > 0时存在）
+            packet_id = None
+            if qos > 0:
+                if pos + 2 > len(message_data):
+                    raise ValueError("MQTT PUBLISH缺少packetId")
+                packet_id = int.from_bytes(message_data[pos:pos+2], 'big')
+                pos += 2
+                if packet_id == 0:
+                    raise ValueError("MQTT PUBLISH packetId不能为0")
+
+            # 有效载荷
+            payload = message_data[pos:].decode('utf-8')
+
+            return {
+                'type': 'publish',
+                'topic': topic,
+                'payload': payload,
+                'qos': qos,
+                'dup': dup,
+                'retain': retain,
+                'packetId': packet_id
+            }
+
+        except Exception as e:
+            logger.error(f"解析PUBLISH消息失败: {e}")
+            raise
+
+    def _parse_subscribe(self, message_data: bytes) -> Dict[str, Any]:
+        """解析SUBSCRIBE消息"""
+        try:
+            # 跳过固定头部和剩余长度
+            _, bytes_read = self._decode_remaining_length()
+            pos = 1 + bytes_read
+
+            # 消息ID
+            if pos + 2 > len(message_data):
+                raise ValueError("MQTT SUBSCRIBE缺少packetId")
+            packet_id = int.from_bytes(message_data[pos:pos+2], 'big')
+            pos += 2
+            if packet_id == 0:
+                raise ValueError("MQTT SUBSCRIBE packetId不能为0")
+
+            # 主题长度
+            if pos + 2 > len(message_data):
+                raise ValueError("MQTT SUBSCRIBE缺少主题长度")
+            topic_length = int.from_bytes(message_data[pos:pos+2], 'big')
+            pos += 2
+            if topic_length == 0 or pos + topic_length > len(message_data):
+                raise ValueError("MQTT SUBSCRIBE主题为空或不完整")
+
+            # 主题
+            topic = message_data[pos:pos+topic_length].decode('utf-8')
+            pos += topic_length
+            if "\x00" in topic:
+                raise ValueError("MQTT SUBSCRIBE主题过滤器无效")
+
+            # QoS
+            if pos >= len(message_data):
+                raise ValueError("MQTT SUBSCRIBE缺少请求QoS")
+            qos = message_data[pos]
+            pos += 1
+            if qos > 2:
+                raise ValueError("MQTT SUBSCRIBE请求QoS无效")
+            if pos != len(message_data):
+                raise ValueError("MQTT SUBSCRIBE当前仅支持单个主题过滤器")
+
+            return {
+                'type': 'subscribe',
+                'packetId': packet_id,
+                'topic': topic,
+                'qos': qos
+            }
+
+        except Exception as e:
+            logger.error(f"解析SUBSCRIBE消息失败: {e}")
+            raise
+
+    async def _handle_message(self, message: Dict[str, Any]):
+        """处理解析后的消息"""
+        message_type = message.get('type')
+
+        if message_type == 'connect':
+            if self.is_connected:
+                raise ValueError("MQTT连接只能发送一次CONNECT")
+            self.keep_alive_interval = message.get('keepAlive', 0)
+            accepted = await self.emit_async('connect', message)
+            self.is_connected = accepted is not False
+            if self.is_connected:
+                self.emit('activity')
+            return
+
+        if not self.is_connected:
+            raise ValueError("MQTT客户端必须先发送CONNECT")
+
+        if message_type == 'publish':
+            self.emit('activity')
+            self._enqueue_application_message(message)
+        elif message_type == 'subscribe':
+            self.emit('activity')
+            await self.emit_async('subscribe', message)
+        elif message_type == 'pingreq':
+            self.emit('activity')
+            await self.send_pingresp()
+        elif message_type == 'disconnect':
+            self.emit('activity')
+            self._enqueue_application_message(message)
+        else:
+            raise ValueError(f"不支持的MQTT消息类型: {message_type}")
+
+    async def send_connack(self, return_code: int = 0, session_present: bool = False):
+        """发送CONNACK消息"""
+        packet = bytearray([
+            PacketType.CONNACK << 4,  # 固定头部
+            2,  # 剩余长度
+            1 if session_present else 0,  # 连接确认标志
+            return_code  # 返回码
+        ])
+
+        await self._send_packet(packet)
+
+    async def send_publish(self, topic: str, payload: str, qos: int = 0,
+                          dup: bool = False, retain: bool = False, packet_id: int = None):
+        """发送PUBLISH消息"""
+        # 构造固定头部
+        first_byte = PacketType.PUBLISH << 4
+        if dup:
+            first_byte |= 0x08
+        if qos > 0:
+            first_byte |= (qos << 1)
+        if retain:
+            first_byte |= 0x01
+
+        # 构造可变头部和载荷
+        topic_bytes = topic.encode('utf-8')
+        payload_bytes = payload.encode('utf-8')
+
+        variable_header = bytearray()
+        variable_header.extend(len(topic_bytes).to_bytes(2, 'big'))
+        variable_header.extend(topic_bytes)
+
+        if qos > 0 and packet_id is not None:
+            variable_header.extend(packet_id.to_bytes(2, 'big'))
+
+        # 计算剩余长度
+        remaining_length = len(variable_header) + len(payload_bytes)
+        remaining_length_bytes = self._encode_remaining_length(remaining_length)
+
+        # 构造完整消息
+        packet = bytearray([first_byte])
+        packet.extend(remaining_length_bytes)
+        packet.extend(variable_header)
+        packet.extend(payload_bytes)
+
+        await self._send_packet(packet)
+
+    async def send_suback(self, packet_id: int, return_code: int = 0):
+        """发送SUBACK消息"""
+        packet = bytearray([
+            PacketType.SUBACK << 4,  # 固定头部
+            3,  # 剩余长度
+            packet_id >> 8,  # 消息ID高字节
+            packet_id & 0xFF,  # 消息ID低字节
+            return_code  # 返回码
+        ])
+
+        await self._send_packet(packet)
+
+    async def send_pingresp(self):
+        """发送PINGRESP消息"""
+        packet = bytearray([
+            PacketType.PINGRESP << 4,  # 固定头部
+            0  # 剩余长度
+        ])
+
+        await self._send_packet(packet)
+
+    async def _send_packet(self, packet: bytearray):
+        """发送数据包"""
+        try:
+            if self.writer is not None:
+                self.writer.write(bytes(packet))
+                await self.writer.drain()
+            else:
+                loop = asyncio.get_event_loop()
+                await loop.sock_sendall(self.socket, bytes(packet))
+        except Exception as e:
+            logger.error(f"发送MQTT数据包失败: {e}")
+            raise
+
+    async def close(self):
+        """关闭协议处理器"""
+        self._closed = True
+        current_task = asyncio.current_task()
+        if (
+            hasattr(self, '_processing_task')
+            and self._processing_task is not current_task
+            and not self._processing_task.done()
+        ):
+            self._processing_task.cancel()
+            try:
+                await self._processing_task
+            except asyncio.CancelledError:
+                pass
+
+        if (
+            hasattr(self, '_dispatch_task')
+            and self._dispatch_task is not current_task
+            and not self._dispatch_task.done()
+        ):
+            self._dispatch_task.cancel()
+            try:
+                await self._dispatch_task
+            except asyncio.CancelledError:
+                pass
+
+        try:
+            if self.writer is not None:
+                self.writer.close()
+                try:
+                    await asyncio.wait_for(
+                        self.writer.wait_closed(),
+                        timeout=self.close_timeout,
+                    )
+                except asyncio.TimeoutError:
+                    logger.warning(
+                        "等待MQTT socket关闭超时，强制中止transport"
+                    )
+                    self.abort()
+                except Exception:
+                    pass
+            elif self.socket:
+                self.socket.close()
+        except Exception as e:
+            logger.error(f"关闭socket失败: {e}")
+
+    def abort(self):
+        """Force-close the underlying transport when graceful close stalls."""
+        if self.writer is not None:
+            transport = getattr(self.writer, "transport", None)
+            if transport is not None:
+                transport.abort()
+                return
+        if self.socket:
+            self.socket.close()

main/xiaozhi-server/core/servers/multi_protocol_server.py

@@ -2,13 +2,14 @@ import asyncio
 from typing import Dict, Any, List, Optional
 from config.logger import setup_logging
 from core.websocket_server_new import NewWebSocketServer
+from core.servers.mqtt_server import MQTTServer
 
 logger = setup_logging()
 
 
 class MultiProtocolServer:
     """
-    协议服务器管理器
+    多协议服务器管理器：统一管理WebSocket和MQTT服务器
     提供统一的启动、停止和状态监控接口
     """
 
@@ -42,6 +43,11 @@ class MultiProtocolServer:
                 self.servers['websocket'] = NewWebSocketServer(self.config)
                 logger.info("WebSocket服务器已初始化")
 
+            # 初始化MQTT服务器
+            if 'mqtt' in enabled_protocols:
+                self.servers['mqtt'] = MQTTServer(self.config)
+                logger.info("MQTT服务器已初始化")
+
             if not self.servers:
                 logger.warning("没有启用任何协议服务器")
 
@@ -333,6 +339,14 @@ class MultiProtocolServer:
         # 检查服务器端口配置
         server_configs = {
             'server': ('port', 'host', 'ip'),
+            'mqtt_server': (
+                'port',
+                'udp_port',
+                'host',
+                'ip',
+                'public_endpoint',
+                'udp_bind_host',
+            ),
         }
         for config_key, listener_keys in server_configs.items():
             old_server_config = old_config.get(config_key, {})
@@ -443,7 +457,7 @@ class MultiProtocolServer:
 
     def get_supported_protocols(self) -> List[str]:
         """获取支持的协议列表"""
-        return ['websocket']
+        return ['websocket', 'mqtt']
 
     def is_protocol_enabled(self, protocol: str) -> bool:
         """检查协议是否启用"""

main/xiaozhi-server/core/services/connection_service.py

@@ -229,6 +229,23 @@ class ConnectionService:
                         await initialization_task
                         initialization_task = None
 
+                    is_native_hello = (
+                        transport.keeps_connection_between_sessions
+                        and is_hello
+                    )
+                    if is_native_hello:
+                        try:
+                            # Every Native Hello is a logical-session boundary.
+                            # Always query Agent config here; the refresh helper
+                            # cheaply retains an unchanged healthy runtime.
+                            component_manager = await self._refresh_private_runtime(
+                                context,
+                                component_manager,
+                                bind_completed_event,
+                            )
+                        finally:
+                            await transport.mark_session_ready(transport.session_id)
+
                     if getattr(context, "init_error", None):
                         # 配置错误时，允许hello/listen触发默认语音（节流）
                         msg_type = msg_json.get("type") if isinstance(msg_json, dict) else None
@@ -337,7 +354,9 @@ class ConnectionService:
             except Exception as e:
                 logger.bind(tag=TAG).error(f"会话清理失败: {e}")
 
-            # Clean the manager currently owned by the context.
+            # A cancelled Native runtime refresh may have already installed a
+            # healthy replacement before this local variable was reassigned.
+            # Always clean the manager currently owned by the context.
             active_component_manager = (
                 getattr(context, "component_manager", None) or component_manager
             )
@@ -785,6 +804,201 @@ class ConnectionService:
                 return None
         return None
 
+    async def _refresh_private_runtime(
+        self,
+        context: SessionContext,
+        component_manager,
+        bind_completed_event: asyncio.Event,
+    ):
+        """Refresh Agent config at a Native MQTT logical-session boundary."""
+        if not context.read_config_from_api:
+            return component_manager
+
+        try:
+            private_config = await get_private_config_from_api(
+                context.common_config,
+                context.device_id,
+                context.headers.get("client-id", context.device_id),
+            )
+        except DeviceNotFoundException:
+            context.need_bind = True
+            return component_manager
+        except DeviceBindException as exc:
+            context.need_bind = True
+            context.bind_code = getattr(exc, "bind_code", None)
+            return component_manager
+        except Exception as exc:
+            logger.bind(tag=TAG).warning(f"刷新差异化配置失败，继续使用当前配置: {exc}")
+            return component_manager
+
+        if not private_config:
+            return component_manager
+
+        private_config["delete_audio"] = bool(
+            context.common_config.get("delete_audio", True)
+        )
+        config_changed = private_config != context.private_config
+        if not config_changed and getattr(context, "init_error", None) is None:
+            context.need_bind = False
+            context.bind_code = None
+            bind_completed_event.set()
+            return component_manager
+
+        await self._finalize_conversation_session(context, context.session_id)
+        await context.cancel_conversation_tasks()
+
+        try:
+            staged_context = copy.copy(context)
+            staged_context.config = copy.deepcopy(context.common_config)
+            staged_context.private_config = copy.deepcopy(private_config)
+            self._reset_config_derived_state(staged_context)
+            staged_context.config.update(copy.deepcopy(private_config))
+            self._reset_config_derived_state(staged_context)
+            self._merge_private_modules(
+                staged_context, copy.deepcopy(private_config)
+            )
+        except Exception as exc:
+            logger.bind(tag=TAG).error(
+                f"物化刷新配置失败，继续使用旧运行时: {exc}"
+            )
+            return component_manager
+
+        try:
+            new_manager = ComponentRegistry.create_component_manager(
+                staged_context.config
+            )
+        except Exception as exc:
+            logger.bind(tag=TAG).error(f"创建刷新业务组件失败，保留旧运行时: {exc}")
+            return component_manager
+
+        runtime_fields = (
+            "config",
+            "private_config",
+            "component_manager",
+            "asr",
+            "tts",
+            "func_handler",
+            "voiceprint_provider",
+            "prompt",
+            "intent_type",
+            "load_function_plugin",
+            "inject_tool_call_fewshot",
+            "dialogue",
+            "max_output_size",
+            "chat_history_conf",
+            "cmd_exit",
+            "need_bind",
+            "bind_code",
+            "init_error",
+            "init_error_notified",
+            "_init_error_last_audio_ts",
+        )
+        missing = object()
+        previous = {
+            field: getattr(context, field, missing) for field in runtime_fields
+        }
+        previous_callbacks = list(context._cleanup_callbacks)
+        old_func_handler = context.func_handler
+
+        context.config = staged_context.config
+        context.private_config = staged_context.private_config
+        context.max_output_size = staged_context.max_output_size
+        context.chat_history_conf = staged_context.chat_history_conf
+        context.cmd_exit = staged_context.cmd_exit
+        context.component_manager = new_manager
+        context.asr = None
+        context.tts = None
+        context.func_handler = None
+        context.voiceprint_provider = None
+        context.prompt = None
+        context.intent_type = "nointent"
+        context.load_function_plugin = False
+        context.inject_tool_call_fewshot = None
+        context.dialogue = Dialogue()
+        context.init_error = None
+
+        try:
+            await self._initialize_components(context, new_manager)
+        except (asyncio.CancelledError, Exception) as exc:
+            was_cancelled = isinstance(exc, asyncio.CancelledError)
+            retry_callbacks = []
+            new_callbacks = [
+                callback
+                for callback in context._cleanup_callbacks
+                if callback not in previous_callbacks
+            ]
+            for callback in reversed(new_callbacks):
+                try:
+                    result = callback()
+                    if asyncio.iscoroutine(result):
+                        await result
+                except (asyncio.CancelledError, Exception) as cleanup_exc:
+                    retry_callbacks.append(callback)
+                    logger.bind(tag=TAG).warning(
+                        f"回滚刷新工具处理器失败: {cleanup_exc}"
+                    )
+            try:
+                await new_manager.cleanup_all()
+            except (asyncio.CancelledError, Exception) as cleanup_exc:
+                retry_callbacks.append(new_manager.cleanup_all)
+                logger.bind(tag=TAG).warning(
+                    f"回滚刷新业务组件失败: {cleanup_exc}"
+                )
+            for field, value in previous.items():
+                if value is missing:
+                    if hasattr(context, field):
+                        delattr(context, field)
+                else:
+                    setattr(context, field, value)
+            context._cleanup_callbacks = previous_callbacks + retry_callbacks
+            if was_cancelled:
+                logger.bind(tag=TAG).info(
+                    "刷新业务组件被取消，已回滚并保留旧运行时"
+                )
+                raise
+            logger.bind(tag=TAG).error(
+                f"刷新业务组件失败，继续使用旧运行时: {exc}"
+            )
+            return component_manager
+
+        # Only retire the previous runtime after the replacement is healthy.
+        # Register the old manager before the first await so cancellation at
+        # any point leaves a cleanup owner for handle_connection.finally.
+        if (
+            component_manager
+            and component_manager.cleanup_all not in context._cleanup_callbacks
+        ):
+            context.register_cleanup(component_manager.cleanup_all)
+        if old_func_handler and hasattr(old_func_handler, "cleanup"):
+            try:
+                await old_func_handler.cleanup()
+            except asyncio.CancelledError:
+                raise
+            except Exception as exc:
+                logger.bind(tag=TAG).warning(f"清理旧工具处理器失败: {exc}")
+            else:
+                context.unregister_cleanup(old_func_handler.cleanup)
+        if component_manager:
+            try:
+                await component_manager.cleanup_all()
+            except asyncio.CancelledError:
+                raise
+            except Exception as exc:
+                logger.bind(tag=TAG).warning(f"清理旧业务组件失败: {exc}")
+            else:
+                context.unregister_cleanup(component_manager.cleanup_all)
+
+        context.init_error = None
+        context.init_error_notified = False
+        context._init_error_last_audio_ts = 0.0
+        context.need_bind = False
+        context.bind_code = None
+        bind_completed_event.set()
+        logger.bind(tag=TAG).info(
+            "Native MQTT逻辑会话已原子刷新私有配置和业务组件"
+        )
+        return new_manager
+
     @staticmethod
     def _reset_config_derived_state(context: SessionContext) -> None:
         """Reset fields derived from config before applying a replacement."""

main/xiaozhi-server/core/services/native_mqtt_call_manager.py

@@ -0,0 +1,726 @@
+import asyncio
+import time
+from dataclasses import dataclass
+from typing import Any, Dict, Optional
+
+from config.logger import setup_logging
+
+logger = setup_logging()
+
+
+def normalize_device_id(device_id: Optional[str]) -> Optional[str]:
+    if not isinstance(device_id, str):
+        return None
+    normalized = device_id.strip().lower().replace("-", ":")
+    return normalized or None
+
+
+@dataclass(frozen=True)
+class PendingCall:
+    caller_mac: str
+    target_mac: str
+    caller_nickname: str
+    created_at: float
+    generation: int
+
+
+class NativeMqttCallManager:
+    def __init__(
+        self,
+        connection_registry,
+        timeout_seconds: float = 60,
+        silence_frame: Optional[bytes] = None,
+        clock=time.monotonic,
+    ):
+        self.connection_registry = connection_registry
+        self.timeout_seconds = max(1.0, float(timeout_seconds))
+        self.silence_frame = silence_frame
+        self.clock = clock
+        self.pending_calls: Dict[str, PendingCall] = {}
+        self.active_calls: Dict[str, str] = {}
+        self.call_session_ids: Dict[str, str] = {}
+        self.call_generations: Dict[str, int] = {}
+        self._next_generation = 1
+        self._generation_end_events: Dict[int, asyncio.Event] = {}
+        self._end_tasks: Dict[tuple[str, int], asyncio.Task] = {}
+        self._lock = asyncio.Lock()
+
+    async def request_call(
+        self,
+        caller_mac: str,
+        target_mac: str,
+        caller_nickname: str = "",
+    ) -> Dict[str, Any]:
+        caller = normalize_device_id(caller_mac)
+        target = normalize_device_id(target_mac)
+        if not caller or not target or caller == target:
+            return {"status": "error", "message": "呼叫设备参数无效"}
+
+        caller_entry = self.connection_registry.resolve_device_now(caller)
+        target_entry = self.connection_registry.resolve_device_now(target)
+        if target_entry is None:
+            return {"status": "offline", "message": "对方设备不在线，请稍后重试"}
+        if caller_entry is None:
+            return {"status": "error", "message": "主叫设备不在线"}
+
+        async with self._lock:
+            if caller in self.active_calls or target in self.active_calls:
+                return {"status": "error", "message": "设备已在通话中"}
+            caller_pending = self._pending_owner_locked(caller)
+            target_pending = self._pending_owner_locked(target)
+            reverse = (
+                caller_pending == target
+                and target_pending == target
+                and self.pending_calls[target].target_mac == caller
+            )
+            if reverse:
+                pending = self.pending_calls.pop(target)
+                self.active_calls[caller] = target
+                self.active_calls[target] = caller
+                generation = pending.generation
+                status = "bridged"
+            elif caller_pending or target_pending:
+                return {"status": "error", "message": "设备已有等待中的通话"}
+            else:
+                generation = self._allocate_generation_locked()
+                self.pending_calls[caller] = PendingCall(
+                    caller_mac=caller,
+                    target_mac=target,
+                    caller_nickname=caller_nickname or "",
+                    created_at=self.clock(),
+                    generation=generation,
+                )
+                status = "pending"
+            self.call_generations[caller] = generation
+            self.call_generations[target] = generation
+            self._capture_session(caller, caller_entry)
+            self._capture_session(target, target_entry)
+            self._set_call_state(caller_entry, True)
+            if status == "bridged":
+                self._set_call_state(target_entry, True)
+
+        try:
+            await self._stop_ai_session(
+                caller_entry, self.call_session_ids.get(caller)
+            )
+            if status == "bridged":
+                await self._stop_ai_session(
+                    target_entry, self.call_session_ids.get(target)
+                )
+        except asyncio.CancelledError:
+            await self.end_call(
+                caller,
+                notify_device=False,
+                notify_peer=False,
+                expected_generation=generation,
+            )
+            raise
+        except Exception as error:
+            await self.end_call(
+                caller,
+                notify_device=True,
+                notify_peer=status == "bridged",
+                expected_generation=generation,
+            )
+            logger.warning(
+                "Native MQTT停止AI会话失败: caller={}, target={}, error={}",
+                caller,
+                target,
+                error,
+            )
+            return {"status": "error", "message": "停止AI会话失败"}
+
+        async with self._lock:
+            if status == "pending":
+                valid = self._pending_matches_locked(
+                    caller, target, generation
+                )
+            else:
+                valid = self._active_matches_locked(
+                    caller, target, generation
+                )
+        if not valid:
+            return {"status": "error", "message": "通话状态已变化"}
+
+        if status == "pending":
+            try:
+                sent = await self._send_while_generation_active(
+                    target_entry.transport,
+                    {
+                        "type": "mcp",
+                        "payload": {
+                            "jsonrpc": "2.0",
+                            "id": 9999,
+                            "method": "tools/call",
+                            "params": {
+                                "name": "self.remote_wakeup",
+                                "arguments": {
+                                    "reason": (
+                                        "[device_call]您收到来自"
+                                        f"{caller_nickname or '未知'}的来电，是否接听？"
+                                    ),
+                                    "action": "listen",
+                                },
+                            },
+                        },
+                    },
+                    generation,
+                )
+                if not sent:
+                    return {"status": "error", "message": "通话状态已变化"}
+            except asyncio.CancelledError:
+                await self.end_call(
+                    caller,
+                    notify_device=False,
+                    notify_peer=False,
+                    expected_generation=generation,
+                )
+                raise
+            except Exception as error:
+                await self.end_call(
+                    caller,
+                    "发送来电通知失败",
+                    notify_device=True,
+                    notify_peer=False,
+                    expected_generation=generation,
+                )
+                logger.warning(
+                    "Native MQTT来电通知发送失败: caller={}, target={}, error={}",
+                    caller,
+                    target,
+                    error,
+                )
+                return {"status": "error", "message": "发送来电通知失败"}
+        return {"status": status}
+
+    async def accept_call(self, callee_mac: str) -> Dict[str, Any]:
+        callee = normalize_device_id(callee_mac)
+        if not callee:
+            return {"status": "error", "message": "接听设备参数无效"}
+
+        callee_entry = self.connection_registry.resolve_device_now(callee)
+        if callee_entry is None:
+            return {"status": "offline", "message": "接听设备不在线"}
+
+        async with self._lock:
+            if callee in self.active_calls:
+                return {"status": "error", "message": "设备已在通话中"}
+            pending = next(
+                (
+                    entry
+                    for entry in self.pending_calls.values()
+                    if entry.target_mac == callee
+                ),
+                None,
+            )
+            if pending is None:
+                return {"status": "no_pending", "message": "没有等待中的通话"}
+
+            caller = pending.caller_mac
+            caller_entry = self.connection_registry.resolve_device_now(caller)
+            if caller_entry is None:
+                self._remove_call_locked(caller)
+                self._set_call_state(callee_entry, False)
+                return {
+                    "status": "caller_gone",
+                    "message": "主叫方已离开或通话已超时",
+                }
+
+            self.pending_calls.pop(caller, None)
+            self.active_calls[caller] = callee
+            self.active_calls[callee] = caller
+            generation = pending.generation
+            self.call_generations[caller] = generation
+            self.call_generations[callee] = generation
+            self._capture_session(caller, caller_entry)
+            self._capture_session(callee, callee_entry)
+            self._set_call_state(caller_entry, True)
+            self._set_call_state(callee_entry, True)
+
+        try:
+            await self._stop_ai_session(
+                callee_entry, self.call_session_ids.get(callee)
+            )
+        except asyncio.CancelledError:
+            await self.end_call(
+                callee,
+                notify_device=False,
+                notify_peer=False,
+                expected_generation=generation,
+            )
+            raise
+        except Exception as error:
+            await self.end_call(
+                callee,
+                notify_device=True,
+                notify_peer=True,
+                expected_generation=generation,
+            )
+            logger.warning(
+                "Native MQTT停止接听方AI会话失败: caller={}, callee={}, error={}",
+                caller,
+                callee,
+                error,
+            )
+            return {"status": "error", "message": "停止AI会话失败"}
+
+        async with self._lock:
+            valid = self._active_matches_locked(
+                caller, callee, generation
+            )
+        if not valid:
+            return {"status": "error", "message": "通话状态已变化"}
+
+        try:
+            sent = await self._send_while_generation_active(
+                caller_entry.transport,
+                {"type": "call_accepted", "from": callee},
+                generation,
+            )
+            if not sent:
+                return {"status": "error", "message": "通话状态已变化"}
+        except asyncio.CancelledError:
+            await self.end_call(
+                callee,
+                notify_device=False,
+                notify_peer=False,
+                expected_generation=generation,
+            )
+            raise
+        except Exception as error:
+            await self.end_call(
+                callee,
+                "发送接听确认失败",
+                notify_device=True,
+                notify_peer=True,
+                expected_generation=generation,
+            )
+            logger.warning(
+                "Native MQTT接听确认发送失败: caller={}, callee={}, error={}",
+                caller,
+                callee,
+                error,
+            )
+            return {"status": "error", "message": "发送接听确认失败"}
+        return {"status": "bridged", "peerMac": caller}
+
+    def route_audio(
+        self, source_device_id: str, payload: bytes, timestamp: int
+    ) -> bool:
+        source = normalize_device_id(source_device_id)
+        if not source:
+            return False
+
+        peer = self.active_calls.get(source)
+        if peer:
+            target = self.connection_registry.resolve_device_now(peer)
+            if target is None:
+                self._schedule_end(source, "对方已离开")
+                return True
+            handler = getattr(target.transport, "_udp_handler", None)
+            try:
+                sent = (
+                    handler is not None
+                    and handler.send_audio_nowait(payload, 0)
+                )
+            except Exception:
+                sent = False
+            if not sent:
+                self._schedule_end(source, "对方音频通道不可用")
+            return True
+
+        if source in self.pending_calls:
+            source_entry = self.connection_registry.resolve_device_now(source)
+            handler = (
+                getattr(source_entry.transport, "_udp_handler", None)
+                if source_entry
+                else None
+            )
+            if handler is not None and self.silence_frame:
+                try:
+                    handler.send_audio_nowait(self.silence_frame, 0)
+                except Exception:
+                    self._schedule_end(source, "主叫音频通道不可用")
+            return True
+        return False
+
+    async def end_call(
+        self,
+        device_id: str,
+        reason: str = "",
+        notify_device: bool = False,
+        notify_peer: bool = True,
+        expected_session_id: Optional[str] = None,
+        expected_generation: Optional[int] = None,
+    ) -> bool:
+        device = normalize_device_id(device_id)
+        if not device:
+            return False
+
+        observed_generation = self.call_generations.get(device)
+        generation = (
+            expected_generation
+            if expected_generation is not None
+            else observed_generation
+        )
+        if observed_generation is None or observed_generation != generation:
+            return False
+        if (
+            expected_session_id is not None
+            and self.call_session_ids.get(device) != expected_session_id
+        ):
+            return False
+        end_event = self._generation_end_events.get(generation)
+        if end_event is not None:
+            end_event.set()
+
+        async with self._lock:
+            current_generation = self.call_generations.get(device)
+            if current_generation != generation:
+                return False
+            if expected_session_id is not None:
+                current_session_id = self.call_session_ids.get(device)
+                if current_session_id != expected_session_id:
+                    return False
+            related = self._remove_call_locked(device)
+        if related is None:
+            return False
+
+        peer = related.get("peer")
+        device_session = related.get("device_session")
+        peer_session = related.get("peer_session")
+        device_entry = self.connection_registry.resolve_device_now(device)
+        peer_entry = (
+            self.connection_registry.resolve_device_now(peer) if peer else None
+        )
+        self._set_call_state(device_entry, False)
+        self._set_call_state(peer_entry, False)
+
+        notifications = []
+        if notify_device and device_entry is not None:
+            notifications.append(
+                self._notify_idle(device_entry, device_session, reason)
+            )
+        if notify_peer and peer_entry is not None:
+            notifications.append(
+                self._notify_idle(peer_entry, peer_session, reason)
+            )
+        if notifications:
+            results = await asyncio.gather(
+                *notifications, return_exceptions=True
+            )
+            for result in results:
+                if isinstance(result, Exception):
+                    logger.warning(
+                        "Native MQTT通话结束通知失败: error={}", result
+                    )
+        return True
+
+    async def cleanup_timeouts(self) -> int:
+        expired = []
+        now = self.clock()
+        async with self._lock:
+            for caller, pending in list(self.pending_calls.items()):
+                if now - pending.created_at >= self.timeout_seconds:
+                    expired.append((caller, pending.generation))
+        for caller, generation in expired:
+            await self.end_call(
+                caller,
+                "呼叫等待超时",
+                notify_device=True,
+                notify_peer=False,
+                expected_generation=generation,
+            )
+        return len(expired)
+
+    async def clear(self) -> None:
+        tasks = list(self._end_tasks.values())
+        self._end_tasks.clear()
+        for task in tasks:
+            task.cancel()
+        if tasks:
+            await asyncio.gather(*tasks, return_exceptions=True)
+        async with self._lock:
+            devices = set(self.pending_calls)
+            devices.update(self.active_calls)
+            devices.update(self.call_generations)
+        for device in devices:
+            await self.end_call(
+                device,
+                "服务停止",
+                notify_device=False,
+                notify_peer=False,
+            )
+        async with self._lock:
+            remaining = set(self.call_generations)
+            remaining.update(self.call_session_ids)
+            self.pending_calls.clear()
+            self.active_calls.clear()
+            self.call_generations.clear()
+            self.call_session_ids.clear()
+            end_events = list(self._generation_end_events.values())
+            self._generation_end_events.clear()
+        for end_event in end_events:
+            end_event.set()
+        for device in remaining:
+            self._set_call_state(
+                self.connection_registry.resolve_device_now(device),
+                False,
+            )
+
+    def contains(self, device_id: str) -> bool:
+        device = normalize_device_id(device_id)
+        return bool(
+            device
+            and (
+                self._pending_owner_now(device) is not None
+                or device in self.active_calls
+            )
+        )
+
+    @property
+    def count(self) -> int:
+        devices = set(self.call_generations)
+        devices.update(self.call_session_ids)
+        devices.update(self.active_calls)
+        devices.update(self.pending_calls)
+        devices.update(
+            pending.target_mac for pending in self.pending_calls.values()
+        )
+        generations = set(self.call_generations.values())
+        orphan_events = set(self._generation_end_events) - generations
+        return len(devices) + len(orphan_events)
+
+    @property
+    def background_task_count(self) -> int:
+        return sum(not task.done() for task in self._end_tasks.values())
+
+    async def handle_logical_hello(
+        self, device_id: str, session_id: Optional[str]
+    ) -> bool:
+        device = normalize_device_id(device_id)
+        if not device:
+            return False
+        async with self._lock:
+            pending_owner = self._pending_owner_locked(device)
+            if (
+                pending_owner is not None
+                and pending_owner != device
+                and device not in self.active_calls
+            ):
+                if session_id:
+                    self.call_session_ids[device] = session_id
+                return False
+            generation = self.call_generations.get(device)
+        if generation is None:
+            return False
+        return await self.end_call(
+            device,
+            "设备重新进入AI会话",
+            notify_device=False,
+            notify_peer=True,
+            expected_session_id=session_id,
+            expected_generation=generation,
+        )
+
+    def _capture_session(self, device_id: str, entry) -> None:
+        session_id = getattr(entry.transport, "session_id", None)
+        if session_id:
+            self.call_session_ids[device_id] = session_id
+
+    def _drop_session(self, device_id: str) -> Optional[str]:
+        return self.call_session_ids.pop(device_id, None)
+
+    def _remove_call_locked(self, device: str) -> Optional[Dict[str, Any]]:
+        generation = self.call_generations.get(device)
+        end_event = self._generation_end_events.get(generation)
+        if end_event is not None:
+            end_event.set()
+        pending = self.pending_calls.pop(device, None)
+        if pending:
+            self._drop_generation(device)
+            self._drop_generation(pending.target_mac)
+            self._generation_end_events.pop(pending.generation, None)
+            return {
+                "peer": pending.target_mac,
+                "device_session": self._drop_session(device),
+                "peer_session": self._drop_session(pending.target_mac),
+            }
+
+        pending_owner = next(
+            (
+                caller
+                for caller, entry in self.pending_calls.items()
+                if entry.target_mac == device
+            ),
+            None,
+        )
+        if pending_owner:
+            pending = self.pending_calls.pop(pending_owner)
+            self._drop_generation(device)
+            self._drop_generation(pending_owner)
+            self._generation_end_events.pop(pending.generation, None)
+            return {
+                "peer": pending_owner,
+                "device_session": self._drop_session(device),
+                "peer_session": self._drop_session(pending_owner),
+            }
+
+        peer = self.active_calls.pop(device, None)
+        if peer:
+            self.active_calls.pop(peer, None)
+            self._drop_generation(device)
+            self._drop_generation(peer)
+            if generation is not None:
+                self._generation_end_events.pop(generation, None)
+            return {
+                "peer": peer,
+                "device_session": self._drop_session(device),
+                "peer_session": self._drop_session(peer),
+            }
+        return None
+
+    def _schedule_end(self, device_id: str, reason: str) -> None:
+        device = normalize_device_id(device_id)
+        generation = self.call_generations.get(device) if device else None
+        if not device or generation is None:
+            return
+        key = (device, generation)
+        existing = self._end_tasks.get(key)
+        if existing is not None and not existing.done():
+            return
+        task = asyncio.create_task(
+            self.end_call(
+                device,
+                reason,
+                notify_device=True,
+                notify_peer=True,
+                expected_generation=generation,
+            )
+        )
+        self._end_tasks[key] = task
+        task.add_done_callback(
+            lambda completed, task_key=key: self._discard_end_task(
+                task_key, completed
+            )
+        )
+
+    def _discard_end_task(
+        self, key: tuple[str, int], task: asyncio.Task
+    ) -> None:
+        if self._end_tasks.get(key) is task:
+            self._end_tasks.pop(key, None)
+        if not task.cancelled():
+            task.exception()
+
+    def _allocate_generation_locked(self) -> int:
+        generation = self._next_generation
+        self._next_generation += 1
+        self._generation_end_events[generation] = asyncio.Event()
+        return generation
+
+    async def _send_while_generation_active(
+        self, transport, message: Dict[str, Any], generation: int
+    ) -> bool:
+        end_event = self._generation_end_events.get(generation)
+        if end_event is None or end_event.is_set():
+            return False
+        send_task = asyncio.create_task(transport.send_json(message))
+        end_task = asyncio.create_task(end_event.wait())
+        try:
+            done, _ = await asyncio.wait(
+                {send_task, end_task},
+                return_when=asyncio.FIRST_COMPLETED,
+            )
+            if end_task in done:
+                send_task.cancel()
+                await asyncio.gather(send_task, return_exceptions=True)
+                return False
+            await send_task
+            return not end_event.is_set()
+        finally:
+            if not send_task.done():
+                send_task.cancel()
+            if not end_task.done():
+                end_task.cancel()
+            await asyncio.gather(
+                send_task, end_task, return_exceptions=True
+            )
+
+    def _pending_owner_locked(self, device: str) -> Optional[str]:
+        if device in self.pending_calls:
+            return device
+        return next(
+            (
+                caller
+                for caller, pending in self.pending_calls.items()
+                if pending.target_mac == device
+            ),
+            None,
+        )
+
+    def _pending_owner_now(self, device: str) -> Optional[str]:
+        return self._pending_owner_locked(device)
+
+    def _pending_matches_locked(
+        self, caller: str, target: str, generation: int
+    ) -> bool:
+        pending = self.pending_calls.get(caller)
+        return bool(
+            pending
+            and pending.target_mac == target
+            and pending.generation == generation
+            and self.call_generations.get(caller) == generation
+            and self.call_generations.get(target) == generation
+        )
+
+    def _active_matches_locked(
+        self, caller: str, target: str, generation: int
+    ) -> bool:
+        return (
+            self.active_calls.get(caller) == target
+            and self.active_calls.get(target) == caller
+            and self.call_generations.get(caller) == generation
+            and self.call_generations.get(target) == generation
+        )
+
+    def _drop_generation(self, device_id: str) -> Optional[int]:
+        return self.call_generations.pop(device_id, None)
+
+    @staticmethod
+    async def _stop_ai_session(entry, session_id: Optional[str]) -> None:
+        if entry is None:
+            return
+        end_conversation = getattr(entry.context, "end_conversation", None)
+        if callable(end_conversation):
+            await end_conversation(session_id)
+            return
+        cancel_tasks = getattr(entry.context, "cancel_conversation_tasks", None)
+        if callable(cancel_tasks):
+            await cancel_tasks()
+
+    @staticmethod
+    def _set_call_state(entry, active: bool) -> None:
+        if entry is None:
+            return
+        entry.context.calling = active
+        if not active:
+            entry.context.incoming_call = None
+
+    @staticmethod
+    async def _notify_idle(entry, session_id: Optional[str], reason: str) -> None:
+        raw_connection = getattr(entry.transport, "raw_connection", None)
+        if raw_connection is None:
+            return
+        try:
+            await raw_connection.notify_device_idle(session_id)
+        finally:
+            end_conversation = getattr(entry.context, "end_conversation", None)
+            if callable(end_conversation):
+                await end_conversation(session_id)
+        if reason:
+            logger.info(
+                "Native MQTT通话结束: device_id={}, reason={}",
+                entry.context.device_id,
+                reason,
+            )

main/xiaozhi-server/core/services/native_mqtt_connection_registry.py

@@ -0,0 +1,137 @@
+import asyncio
+from dataclasses import dataclass
+from typing import Any, Dict, Iterable, Optional
+
+
+@dataclass(frozen=True)
+class NativeMqttConnection:
+    client_id: str
+    device_id: Optional[str]
+    connection_id: int
+    context: Any
+    transport: Any
+
+    @property
+    def is_alive(self) -> bool:
+        return bool(getattr(self.transport, "is_connected", False))
+
+
+class NativeMqttConnectionRegistry:
+    def __init__(self):
+        self._connections: Dict[str, NativeMqttConnection] = {}
+        self._devices: Dict[str, NativeMqttConnection] = {}
+        self._lock = asyncio.Lock()
+
+    async def register(self, context: Any, transport: Any) -> bool:
+        client_id = getattr(transport, "client_id", None)
+        raw_connection = getattr(transport, "raw_connection", None)
+        connection_id = getattr(raw_connection, "connection_id", None)
+        if not client_id or connection_id is None:
+            return False
+
+        entry = NativeMqttConnection(
+            client_id=client_id,
+            device_id=self._normalize_device_id(
+                getattr(context, "device_id", None)
+            ),
+            connection_id=connection_id,
+            context=context,
+            transport=transport,
+        )
+        async with self._lock:
+            previous_client = self._connections.get(client_id)
+            previous_device = (
+                self._devices.get(entry.device_id)
+                if entry.device_id
+                else None
+            )
+            for previous in (previous_client, previous_device):
+                if previous is None or previous is entry:
+                    continue
+                if self._connections.get(previous.client_id) is previous:
+                    self._connections.pop(previous.client_id, None)
+                if (
+                    previous.device_id
+                    and self._devices.get(previous.device_id) is previous
+                ):
+                    self._devices.pop(previous.device_id, None)
+            self._connections[client_id] = entry
+            if entry.device_id:
+                self._devices[entry.device_id] = entry
+        return True
+
+    async def unregister(self, context: Any, transport: Any) -> bool:
+        client_id = getattr(transport, "client_id", None)
+        if not client_id:
+            return False
+
+        async with self._lock:
+            entry = self._connections.get(client_id)
+            if (
+                entry is None
+                or entry.context is not context
+                or entry.transport is not transport
+            ):
+                return False
+            self._connections.pop(client_id, None)
+            if (
+                entry.device_id
+                and self._devices.get(entry.device_id) is entry
+            ):
+                self._devices.pop(entry.device_id, None)
+        return True
+
+    async def resolve(self, client_id: str) -> Optional[NativeMqttConnection]:
+        async with self._lock:
+            entry = self._connections.get(client_id)
+            if entry is None or not entry.is_alive:
+                return None
+            return entry
+
+    async def status(self, client_ids: Iterable[str]) -> Dict[str, Dict[str, Any]]:
+        async with self._lock:
+            result = {}
+            for client_id in client_ids:
+                entry = self._connections.get(client_id)
+                exists = entry is not None
+                result[client_id] = {
+                    "isAlive": bool(entry and entry.is_alive),
+                    "exists": exists,
+                    "backend": "native",
+                }
+        return result
+
+    async def resolve_device(
+        self, device_id: str
+    ) -> Optional[NativeMqttConnection]:
+        async with self._lock:
+            return self.resolve_device_now(device_id)
+
+    def resolve_device_now(
+        self, device_id: str
+    ) -> Optional[NativeMqttConnection]:
+        normalized = self._normalize_device_id(device_id)
+        entry = self._devices.get(normalized) if normalized else None
+        if entry is None or not entry.is_alive:
+            return None
+        return entry
+
+    async def clear(self) -> None:
+        async with self._lock:
+            self._connections.clear()
+            self._devices.clear()
+
+    async def size(self) -> int:
+        async with self._lock:
+            return len(self._connections)
+
+    @property
+    def count(self) -> int:
+        return len(self._connections)
+
+    @staticmethod
+    def _normalize_device_id(device_id: Optional[str]) -> Optional[str]:
+        if not isinstance(device_id, str):
+            return None
+        normalized = device_id.strip().lower().replace("-", ":")
+        return normalized or None

main/xiaozhi-server/core/transport/mqtt_transport.py

@@ -0,0 +1,525 @@
+import asyncio
+import json
+import time
+from collections import deque
+from typing import Any, AsyncGenerator, Dict, Optional
+from .transport_interface import TransportInterface
+from config.logger import setup_logging
+from cryptography.hazmat.primitives.ciphers import Cipher, algorithms, modes
+from cryptography.hazmat.backends import default_backend
+
+logger = setup_logging()
+
+
+class MQTTTransport(TransportInterface):
+    """
+    MQTT传输层实现：直接处理MQTT协议消息
+    支持JSON消息和二进制音频数据传输
+    """
+
+    def __init__(self, mqtt_connection, udp_handler=None):
+        """
+        初始化MQTT传输层
+
+        Args:
+            mqtt_connection: MQTT连接对象，包含协议处理器
+            udp_handler: UDP处理器，用于音频数据传输
+        """
+        self._mqtt_connection = mqtt_connection
+        self._udp_handler = udp_handler
+        queue_size = int(getattr(mqtt_connection, "message_queue_size", 128) or 128)
+        self._audio_queue = deque(maxlen=max(1, queue_size))
+        self._control_queue = deque(maxlen=max(32, min(queue_size, 128)))
+        self._urgent_queue = deque(maxlen=32)
+        self._arrival_sequence = 0
+        self._message_event = asyncio.Event()
+        self._closed = False
+
+        # 设置MQTT连接的消息回调
+        self._setup_message_handlers()
+
+    def _setup_message_handlers(self):
+        """设置消息处理回调"""
+        # 设置MQTT消息接收回调
+        self._mqtt_connection.set_message_callback(self._on_mqtt_message)
+
+        # 设置UDP消息接收回调（如果有UDP处理器）
+        if self._udp_handler:
+            self._udp_handler.set_message_callback(self._on_udp_message)
+
+    def _on_mqtt_message(self, topic: str, payload: str):
+        """处理接收到的MQTT消息"""
+        try:
+            # 解析JSON消息
+            message_data = json.loads(payload)
+            message_data['_transport_type'] = 'mqtt'
+            message_data['_topic'] = topic
+
+            # Hello is a complete logical-session barrier. Discard all queued
+            # work from the previous session before admitting the new Hello.
+            if message_data.get("type") == "hello":
+                self._audio_queue.clear()
+                self._control_queue.clear()
+                self._urgent_queue.clear()
+
+            self._enqueue_message(message_data)
+
+        except json.JSONDecodeError as e:
+            logger.error(f"MQTT消息JSON解析失败: {e}, payload: {payload}")
+        except Exception as e:
+            logger.error(f"处理MQTT消息失败: {e}")
+
+    def _on_udp_message(self, audio_data: bytes, timestamp: int):
+        """处理接收到的UDP音频消息"""
+        try:
+            # 构造音频消息格式
+            message_data = {
+                'type': 'audio',
+                'data': audio_data,
+                'timestamp': timestamp,
+                '_transport_type': 'udp'
+            }
+
+            self._enqueue_message(message_data)
+
+        except Exception as e:
+            logger.error(f"处理UDP音频消息失败: {e}")
+
+    def _enqueue_message(self, message_data: Dict[str, Any]) -> None:
+        self._arrival_sequence += 1
+        queued_message = (self._arrival_sequence, message_data)
+        if message_data.get("type") == "abort":
+            self._urgent_queue.append(queued_message)
+            self._message_event.set()
+            return
+
+        if message_data.get("type") == "audio":
+            if len(self._audio_queue) >= self._audio_queue.maxlen:
+                self._audio_queue.popleft()
+                logger.warning("MQTT audio receive queue is full; evicted oldest frame")
+            self._audio_queue.append(queued_message)
+        else:
+            if len(self._control_queue) >= self._control_queue.maxlen:
+                boundary_types = {"hello", "goodbye"}
+                evict_index = next(
+                    (
+                        index
+                        for index, (_, queued) in enumerate(self._control_queue)
+                        if queued.get("type") not in boundary_types
+                    ),
+                    None,
+                )
+                if evict_index is None:
+                    if message_data.get("type") not in boundary_types:
+                        logger.warning(
+                            "MQTT control queue contains only session boundaries; "
+                            "dropping non-boundary frame"
+                        )
+                        return
+                    self._control_queue.popleft()
+                else:
+                    del self._control_queue[evict_index]
+                logger.warning(
+                    "MQTT control queue is full; evicted non-boundary control frame"
+                )
+            self._control_queue.append(queued_message)
+        self._message_event.set()
+
+    async def _next_message(self):
+        while not self._closed:
+            # Hello establishes the logical-session boundary. An Abort sent
+            # immediately after the Hello reply must not overtake it and be
+            # compared against the previous session.
+            if (
+                self._control_queue
+                and self._control_queue[0][1].get("type") == "hello"
+            ):
+                return self._control_queue.popleft()[1]
+            if self._urgent_queue:
+                return self._urgent_queue.popleft()[1]
+            if self._control_queue and self._audio_queue:
+                queue = (
+                    self._control_queue
+                    if self._control_queue[0][0] < self._audio_queue[0][0]
+                    else self._audio_queue
+                )
+                return queue.popleft()[1]
+            if self._control_queue:
+                return self._control_queue.popleft()[1]
+            if self._audio_queue:
+                return self._audio_queue.popleft()[1]
+
+            self._message_event.clear()
+            if self._urgent_queue or self._control_queue or self._audio_queue:
+                continue
+            await asyncio.wait_for(self._message_event.wait(), timeout=1.0)
+        return None
+
+    async def send(self, data: Any) -> None:
+        """发送消息"""
+        if self._closed:
+            raise RuntimeError("Transport is closed")
+
+        try:
+            if isinstance(data, dict):
+                # 根据消息类型选择传输方式
+                if data.get('type') == 'audio' and self._udp_handler:
+                    # 音频数据通过UDP发送
+                    audio_data = data.get('data')
+                    timestamp = data.get('timestamp', 0)
+                    await self._udp_handler.send_audio(audio_data, timestamp)
+                else:
+                    # JSON消息通过MQTT发送
+                    topic = data.get('_topic', self._mqtt_connection.reply_topic)
+                    payload = json.dumps(data)
+                    await self._mqtt_connection.send_message(topic, payload)
+
+            elif isinstance(data, str):
+                # 字符串消息通过MQTT发送
+                await self._mqtt_connection.send_message(
+                    self._mqtt_connection.reply_topic,
+                    data
+                )
+
+            elif isinstance(data, bytes):
+                # 二进制数据通过UDP发送（如果有UDP处理器）
+                if self._udp_handler:
+                    await self._udp_handler.send_audio(data, 0)
+                else:
+                    logger.warning("尝试发送二进制数据但没有UDP处理器")
+
+            else:
+                # 其他类型转换为字符串通过MQTT发送
+                await self._mqtt_connection.send_message(
+                    self._mqtt_connection.reply_topic,
+                    str(data)
+                )
+
+        except Exception as e:
+            logger.error(f"MQTT传输发送消息失败: {e}")
+            raise
+
+    async def send_json(self, message: Any) -> None:
+        if isinstance(message, str):
+            await self.send(message)
+            return
+        await self.send(dict(message))
+
+    async def send_audio(self, audio: bytes, timestamp: int = 0) -> None:
+        if not self._udp_handler:
+            raise RuntimeError("UDP audio channel is not available")
+        await self._udp_handler.send_audio(audio, timestamp)
+
+    @property
+    def requires_audio_tail_grace(self) -> bool:
+        return True
+
+    async def prepare_audio_channel(self, audio_params=None, version: int = 3) -> None:
+        if not self._udp_handler:
+            return
+        if getattr(self._mqtt_connection, "udp_config", None) is None:
+            await self._mqtt_connection.send_hello_reply(audio_params or {}, version)
+
+    async def wait_audio_ready(self, timeout: float = 0) -> bool:
+        if not self._udp_handler:
+            return False
+        deadline = time.monotonic() + max(timeout, 0)
+        while getattr(self._udp_handler, "remote_address", None) is None:
+            if time.monotonic() >= deadline:
+                return False
+            await asyncio.sleep(min(0.05, max(deadline - time.monotonic(), 0)))
+        return True
+
+    async def mark_business_ready(self) -> None:
+        self._mqtt_connection.business_ready_event.set()
+        schedule_recovery = getattr(
+            self._mqtt_connection, "schedule_stale_session_recovery", None
+        )
+        if callable(schedule_recovery):
+            schedule_recovery()
+
+    async def mark_session_ready(self, session_id: str = None) -> None:
+        self._mqtt_connection.mark_business_session_ready(session_id)
+
+    async def end_session(self, session_id: str) -> None:
+        await self._mqtt_connection.notify_device_idle(session_id)
+
+    async def receive(self) -> AsyncGenerator[Any, None]:
+        """异步消息流"""
+        while not self._closed:
+            try:
+                # 等待消息，设置超时避免无限等待
+                message = await self._next_message()
+                if message is None:
+                    break
+                yield message
+
+            except asyncio.TimeoutError:
+                # 超时继续循环，检查连接状态
+                if not self.is_connected:
+                    break
+                continue
+
+            except Exception as e:
+                logger.error(f"MQTT传输接收消息失败: {e}")
+                break
+
+    async def close(self) -> None:
+        """关闭传输层"""
+        if self._closed:
+            return
+
+        self._closed = True
+
+        try:
+            # 关闭MQTT连接
+            if self._mqtt_connection:
+                await self._mqtt_connection.close()
+
+            # 关闭UDP处理器
+            if self._udp_handler:
+                await self._udp_handler.close()
+
+        except Exception as e:
+            logger.error(f"关闭MQTT传输层失败: {e}")
+            raise RuntimeError("MQTT transport close failed")
+
+    @property
+    def is_connected(self) -> bool:
+        """检查连接状态"""
+        if self._closed:
+            return False
+
+        try:
+            # 检查MQTT连接状态
+            mqtt_connected = (
+                self._mqtt_connection and
+                self._mqtt_connection.is_connected()
+            )
+
+            return mqtt_connected
+
+        except Exception as e:
+            logger.error(f"检查MQTT连接状态失败: {e}")
+            return False
+
+    @property
+    def device_id(self) -> Optional[str]:
+        """获取设备ID"""
+        return getattr(self._mqtt_connection, 'device_id', None)
+
+    @property
+    def client_id(self) -> Optional[str]:
+        """获取客户端ID"""
+        return getattr(self._mqtt_connection, 'client_id', None)
+
+    @property
+    def username(self) -> Optional[str]:
+        """获取MQTT用户名"""
+        return getattr(self._mqtt_connection, 'username', None)
+
+    @property
+    def password(self) -> Optional[str]:
+        """获取MQTT密码"""
+        return getattr(self._mqtt_connection, 'password', None)
+
+    @property
+    def session_id(self) -> Optional[str]:
+        """获取会话ID"""
+        return getattr(self._mqtt_connection, 'session_id', None)
+
+    @property
+    def transport_type(self) -> str:
+        return "mqtt"
+
+    @property
+    def has_datagram_audio(self) -> bool:
+        return self._udp_handler is not None
+
+    @property
+    def keeps_connection_between_sessions(self) -> bool:
+        return True
+
+    @property
+    def is_protocol_authenticated(self) -> bool:
+        return bool(getattr(self._mqtt_connection, "connect_accepted", False))
+
+    @property
+    def raw_connection(self):
+        return self._mqtt_connection
+
+
+class UDPAudioHandler:
+    """
+    UDP音频处理器：处理加密音频数据传输
+    """
+
+    def __init__(
+        self,
+        connection_id: int,
+        udp_server,
+        encryption_config: Dict[str, Any],
+        allowed_remote_ip: Optional[str] = None,
+    ):
+        self.connection_id = connection_id
+        self.udp_server = udp_server
+        self.encryption_config = encryption_config
+        self.allowed_remote_ip = allowed_remote_ip
+        self.remote_address = None
+        self.message_callback = None
+        self.audio_interceptor = None
+        self._closed = False
+        self.local_sequence = 0
+        self.remote_sequence = 0
+        self.audio_sequence_start = None
+        self.audio_start_time = None
+        self.frame_ms = 60
+
+    def set_message_callback(self, callback):
+        """设置消息接收回调"""
+        self.message_callback = callback
+
+    def set_audio_interceptor(self, callback):
+        self.audio_interceptor = callback
+
+    def configure_encryption(self, udp_config: Dict[str, Any]):
+        """设置UDP加密参数"""
+        if not udp_config:
+            return
+        self.encryption_config = udp_config
+        # A new Hello creates a new UDP session. Allow the first valid packet
+        # from the MQTT peer to establish the new source tuple.
+        self.remote_address = None
+        self.reset_sequence()
+
+    def reset_sequence(self):
+        """重置UDP序列号（本地/远端）"""
+        self.reset_local_sequence()
+        self.reset_remote_sequence()
+
+    def reset_local_sequence(self):
+        """重置本地发送序列号"""
+        self.local_sequence = 0
+
+    def reset_remote_sequence(self):
+        """重置远端接收序列号"""
+        self.remote_sequence = 0
+        self.audio_sequence_start = None
+        self.audio_start_time = None
+
+    async def send_audio(self, audio_data: bytes, timestamp: int):
+        """发送音频数据"""
+        if self._closed:
+            raise RuntimeError("UDP audio handler is closed")
+        if not self.remote_address:
+            raise RuntimeError("UDP remote address is not ready")
+
+        next_sequence = self.local_sequence + 1
+        await self.udp_server.send_encrypted_audio(
+            self.connection_id,
+            audio_data,
+            timestamp,
+            next_sequence,
+            self.remote_address,
+            self.encryption_config
+        )
+        self.local_sequence = next_sequence
+
+    def send_audio_nowait(self, audio_data: bytes, timestamp: int) -> bool:
+        if self._closed or not self.remote_address:
+            return False
+        next_sequence = self.local_sequence + 1
+        self.udp_server.send_encrypted_audio_nowait(
+            self.connection_id,
+            audio_data,
+            timestamp,
+            next_sequence,
+            self.remote_address,
+            self.encryption_config,
+        )
+        self.local_sequence = next_sequence
+        return True
+
+    def on_udp_message(self, header: bytes, encrypted_payload: bytes, payload_length: int,
+                       timestamp: int, sequence: int, remote_addr):
+        """处理接收到的UDP消息"""
+        if self._closed:
+            return
+
+        if self.allowed_remote_ip and remote_addr[0] != self.allowed_remote_ip:
+            logger.warning(
+                "Rejected UDP packet from non-MQTT peer: {}, expected IP: {}",
+                remote_addr,
+                self.allowed_remote_ip,
+            )
+            return
+
+        if self.remote_address is not None and remote_addr != self.remote_address:
+            logger.warning(
+                "Rejected UDP source rebind during active session: {}, bound: {}",
+                remote_addr,
+                self.remote_address,
+            )
+            return
+
+        if self.audio_sequence_start is not None and sequence <= self.remote_sequence:
+            return
+
+        if sequence != self.remote_sequence + 1:
+            logger.warning(
+                "Received UDP packet with wrong sequence: {}, expected: {}",
+                sequence,
+                self.remote_sequence + 1
+            )
+
+        if len(encrypted_payload) != payload_length:
+            logger.warning(
+                "UDP payload length mismatch: {} != {}",
+                len(encrypted_payload),
+                payload_length,
+            )
+            return
+
+        try:
+            key = self.encryption_config.get('key') if self.encryption_config else None
+            if key:
+                cipher = Cipher(algorithms.AES(key), modes.CTR(header), backend=default_backend())
+                decryptor = cipher.decryptor()
+                payload = decryptor.update(encrypted_payload) + decryptor.finalize()
+            else:
+                payload = encrypted_payload
+        except Exception as e:
+            logger.error("UDP decrypt failed: {}", e)
+            return
+
+        if self.remote_address is None:
+            self.remote_address = remote_addr
+            self.audio_start_time = time.time()
+            self.audio_sequence_start = sequence
+            self.remote_sequence = sequence - 1
+
+        if self.audio_sequence_start is None:
+            self.audio_sequence_start = sequence
+
+        self.remote_sequence = sequence
+
+        normalized_timestamp = timestamp
+        if timestamp == 0 and self.audio_sequence_start is not None:
+            normalized_timestamp = (
+                (sequence - self.audio_sequence_start) * self.frame_ms
+            ) % (2 ** 32)
+
+        if self.audio_interceptor and self.audio_interceptor(
+            payload, normalized_timestamp
+        ):
+            return
+
+        if self.message_callback:
+            self.message_callback(payload, normalized_timestamp)
+
+    async def close(self):
+        """关闭UDP处理器"""
+        self._closed = True
+        self.message_callback = None
+        self.audio_interceptor = None
+        self.remote_address = None

main/xiaozhi-server/core/utils/mqtt_auth.py

@@ -0,0 +1,100 @@
+import base64
+import hashlib
+import hmac
+import json
+import re
+from config.logger import setup_logging
+
+logger = setup_logging()
+TAG = __name__
+
+_MAC_ADDRESS_PATTERN = re.compile(r"^(?:[0-9A-Fa-f]{2}[:-]){5}[0-9A-Fa-f]{2}$")
+_ENDPOINT_SCHEME_PATTERN = re.compile(
+    r"^(?:mqtt|tcp|ssl|ws|wss|http|https)://", re.IGNORECASE
+)
+
+
+def normalize_signature_key(secret_key: str) -> str:
+    """Treat values emitted by manager-api for an unset parameter as empty."""
+    if secret_key is None:
+        return ""
+    value = str(secret_key).strip()
+    if not value or value.lower() == "null" or "你" in value:
+        return ""
+    return value
+
+
+def generate_password_signature(content: str, secret_key: str) -> str:
+    """生成MQTT密码签名（HMAC-SHA256 + Base64）"""
+    try:
+        hmac_obj = hmac.new(
+            secret_key.encode("utf-8"), content.encode("utf-8"), hashlib.sha256
+        )
+        signature = hmac_obj.digest()
+        return base64.b64encode(signature).decode("utf-8")
+    except Exception as e:
+        logger.bind(tag=TAG).error(f"生成MQTT密码签名失败: {e}")
+        return ""
+
+
+def parse_mqtt_endpoint(endpoint: str, default_port: int = None) -> tuple[str, int]:
+    """Parse the host[:port] syntax supported by the current ESP firmware."""
+    if endpoint is None:
+        return "", default_port
+    value = str(endpoint).strip()
+    if not value or value.lower() == "null" or "你" in value:
+        return "", default_port
+
+    value = _ENDPOINT_SCHEME_PATTERN.sub("", value, count=1).split("/", 1)[0]
+    if not value or value.startswith("[") or value.count(":") > 1:
+        raise ValueError("MQTT endpoint格式无效")
+
+    host = value
+    port = default_port
+    if ":" in value:
+        host, port_text = value.rsplit(":", 1)
+        if not port_text.isdigit():
+            raise ValueError("MQTT endpoint端口无效")
+        port = int(port_text)
+
+    if not host or any(char.isspace() for char in host):
+        raise ValueError("MQTT endpoint主机无效")
+    if port is not None and not 1 <= int(port) <= 65535:
+        raise ValueError("MQTT endpoint端口超出范围")
+    return host, int(port) if port is not None else None
+
+
+def validate_mqtt_credentials(
+    client_id: str, username: str, password: str, secret_key: str
+) -> None:
+    """Validate the gateway-compatible MQTT client id and HMAC credentials."""
+    if not client_id or not isinstance(client_id, str):
+        raise ValueError("clientId必须是非空字符串")
+
+    parts = client_id.split("@@@")
+    if len(parts) not in (2, 3) or not parts[0] or not parts[1]:
+        raise ValueError("clientId格式错误")
+
+    mac_address = parts[1].replace("_", ":")
+    if not _MAC_ADDRESS_PATTERN.fullmatch(mac_address):
+        raise ValueError("clientId中的MAC地址无效")
+
+    normalized_key = normalize_signature_key(secret_key)
+    if len(parts) == 2:
+        if normalized_key:
+            raise ValueError("启用签名时clientId必须包含UUID")
+        return
+
+    if not username or not isinstance(username, str):
+        raise ValueError("username必须是非空字符串")
+    try:
+        user_data = json.loads(base64.b64decode(username, validate=True).decode("utf-8"))
+        if not isinstance(user_data, dict):
+            raise ValueError
+    except Exception as exc:
+        raise ValueError("username不是有效的base64编码JSON") from exc
+
+    if normalized_key:
+        expected = generate_password_signature(client_id + "|" + username, normalized_key)
+        if not password or not hmac.compare_digest(password, expected):
+            raise ValueError("密码签名验证失败")

main/xiaozhi-server/core/xiaozhi_server_facade.py

@@ -19,7 +19,7 @@ class XiaozhiServerFacade:
     提供统一的服务器管理接口，屏蔽内部协议复杂性
 
     功能：
-    - 协议管理
+    - 协议管理（WebSocket、MQTT）
     - 本地 ASR 模型预加载
     - 优雅启动和停止
     """
@@ -49,15 +49,24 @@ class XiaozhiServerFacade:
             protocols = self.config.get("protocols", {})
             if not isinstance(protocols, dict):
                 protocols = {}
+            mqtt_config = self.config.get("mqtt_server", {})
+            if not isinstance(mqtt_config, dict):
+                mqtt_config = {}
+
             requested = protocols.get("enabled_protocols")
             requested = requested if isinstance(requested, list) else []
             websocket_enabled = protocols.get("websocket_enabled")
             if websocket_enabled is None:
                 websocket_enabled = not protocols or "websocket" in requested
 
+            mqtt_requested = protocols.get("mqtt_enabled") is True or "mqtt" in requested
+            mqtt_enabled = mqtt_config.get("enabled") is True and mqtt_requested
+
             enabled_protocols = []
             if websocket_enabled:
                 enabled_protocols.append("websocket")
+            if mqtt_enabled:
+                enabled_protocols.append("mqtt")
 
             self.config["enabled_protocols"] = enabled_protocols
             logger.info(f"启用的协议: {enabled_protocols}")
@@ -398,7 +407,7 @@ class XiaozhiServerFacade:
         """获取支持的协议列表"""
         if self.multi_protocol_server:
             return self.multi_protocol_server.get_supported_protocols()
-        return ['websocket']
+        return ['websocket', 'mqtt']
 
     def is_protocol_enabled(self, protocol: str) -> bool:
         """检查协议是否启用"""
@@ -416,6 +425,68 @@ class XiaozhiServerFacade:
         if self.multi_protocol_server:
             await self.multi_protocol_server.broadcast_message(message, protocol)
 
+    def _get_protocol_server(self, protocol: str):
+        if not self.multi_protocol_server:
+            return None
+        return self.multi_protocol_server.servers.get(protocol)
+
+    async def register_connection_context(self, context, transport) -> bool:
+        if getattr(transport, "transport_type", None) != "mqtt":
+            return False
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return False
+        return await server.register_connection_context(context, transport)
+
+    async def unregister_connection_context(self, context, transport) -> bool:
+        if getattr(transport, "transport_type", None) != "mqtt":
+            return False
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return False
+        return await server.unregister_connection_context(context, transport)
+
+    async def resolve_native_mqtt_connection(self, client_id: str):
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return None
+        return await server.resolve_connection_context(client_id)
+
+    async def get_native_mqtt_status(self, client_ids):
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return {
+                client_id: {
+                    "isAlive": False,
+                    "exists": False,
+                    "backend": "native",
+                }
+                for client_id in client_ids
+            }
+        return await server.get_connection_status(client_ids)
+
+    async def request_native_mqtt_call(
+        self, caller_mac: str, target_mac: str, caller_nickname: str = ""
+    ):
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return {
+                "status": "error",
+                "message": "Native MQTT服务未启动",
+            }
+        return await server.request_device_call(
+            caller_mac, target_mac, caller_nickname
+        )
+
+    async def accept_native_mqtt_call(self, device_id: str):
+        server = self._get_protocol_server("mqtt")
+        if server is None:
+            return {
+                "status": "error",
+                "message": "Native MQTT服务未启动",
+            }
+        return await server.accept_device_call(device_id)
+
     def get_websocket_info(self) -> Dict[str, Any]:
         """获取WebSocket连接信息"""
         if not self.is_protocol_enabled('websocket'):
@@ -429,9 +500,24 @@ class XiaozhiServerFacade:
             'path': '/xiaozhi/v1/'
         }
 
+    def get_mqtt_info(self) -> Dict[str, Any]:
+        """获取MQTT连接信息"""
+        if not self.is_protocol_enabled('mqtt'):
+            return {'enabled': False}
+
+        mqtt_config = self.config.get('mqtt_server', {})
+        return {
+            'enabled': True,
+            'host': mqtt_config.get('host', '0.0.0.0'),
+            'port': mqtt_config.get('port', 1883),
+            'udp_port': mqtt_config.get('udp_port', 1883),
+            'public_endpoint': mqtt_config.get('public_endpoint', '')
+        }
+
     def get_connection_info(self) -> Dict[str, Any]:
         """获取所有协议的连接信息"""
         return {
             'websocket': self.get_websocket_info(),
+            'mqtt': self.get_mqtt_info(),
             'active_connections': self.get_active_connections_count()
         }